Brand procurement
JUNIPER Products and Procurement - Page 12
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated JUNIPER Products
Juniper SRX4100-E-P-UPG Enhanced Performance Upgrade License
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.
Juniper S-ACX-400G-A-1 Advanced Subscription Renewal License
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.
Juniper S-ACX-400G-P-1 Premium Software Renewal License
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.
Juniper ACX5448-L-PE FIB and VRF Scale Feature License
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.
Juniper ACX500-LIC-SEC IPsec and NAT Feature Activation License
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.
Juniper ACX500-LIC-GPS Receiver Activation License
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.
Juniper ACX5448-D-FAN-AFI Airflow-In Fan Module
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.
Juniper ACX5448-FAN-AFO Front-to-Back Fan Module
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER Procurement Guide
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Junos and license requirements before ordering.
- Confirm port, optics and airflow compatibility before ordering.
- Confirm power option, TAA requirement and support status before ordering.
How to compare JUNIPER models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
EX-SFP-10GE-ZR is a Juniper 10GBASE-ZR SFP+ module operating at 10 Gbps over dual-fiber SMF, with 1550 nm optics and a documented 80 km reach class.US$ 600.00
Condition: New Factory Sealed
EX-SFP-10GE-ER is a Juniper 10GBASE-ER SFP+ module operating at 10 Gbps over dual-fiber SMF, with 1550 nm optics and a documented 40 km reach class.US$ 800.00
Condition: New Factory Sealed
EX-SFP-GE80KCW1510 is a Juniper 1GbE CWDM SFP for the 1510nm channel, using duplex LC single-mode fiber with an 80km reach class.US$ 510.00
Condition: New Factory Sealed
EX-SFP-1GE-LH is a Juniper 1000BASE-LH SFP with duplex LC, 1550nm transmission and a 70km single-mode-fiber reach class.US$ 75.00
Condition: New Factory Sealed
EX-SFP-10GE-DAC-5M is Juniper part 740-031838, a 5-meter 24-AWG passive SFP+ Twinax direct-attach copper cable for 10GbE full-duplex links.US$ 35.00
Condition: New Factory Sealed
EX-SFP-10GE-DAC-3M is Juniper part 740-030077, a 3-meter 30-AWG passive SFP+ Twinax DAC for point-to-point 10GbE full-duplex connections.US$ 30.00
Condition: New Factory Sealed
EX-SFP-10GE-DAC-1M is Juniper part 740-030076, a 1-meter passive SFP+ Twinax direct-attach copper assembly for 10GbE full-duplex links.US$ 25.00
Condition: New Factory Sealed
SRX5800X-B10-AC identifies a Juniper SRX5800X B10 hardware bundle with AC power selection; verify the exact chassis component, PEM and regional power-cord bill of materials.US$ 56,000.00
Condition: New Factory Sealed
SRX5800X-B10-DC identifies a Juniper SRX5800X B10 hardware bundle with DC power selection; verify the exact chassis component and DC PEM bill of materials before installation.US$ 56,000.00
Condition: New Factory Sealed
NFX250-S2 is the higher-resource Juniper NFX250 model with a six-core Intel CPU, 32GB RAM and 400GB enterprise SSD storage for larger virtual network function footprints.US$ 1,621.00
Condition: New Factory Sealed
NFX250-S1E is Juniper's 16GB NFX250 with a 200GB primary SSD, 25GB secondary boot SSD and documented Secure Router profile alongside the mixed 1GbE/SFP/SFP+ port set.US$ 1,439.00
Condition: New Factory Sealed
EX4300-24P is Juniper's 1U 24-port 1GbE PoE+ access switch with four built-in 40GbE QSFP+ ports, a 715W AC power supply and a 550W-class PoE budget.US$ 2,937.00
Condition: New Factory Sealed
NFX250-S1 is a Juniper six-core network services platform with 16GB RAM, 100GB SSD storage and a mixed 1GbE/SFP/SFP+ interface set for virtualized CPE deployments.US$ 1,398.00
Condition: New Factory Sealed
EX4300-48P is Juniper's 1U 48-port 1GbE PoE+ access switch with four built-in 40GbE QSFP+ ports, a 1100W AC power supply and a 900W-class PoE budget.US$ 3,000.00
Condition: New Factory Sealed
EX2300-C-12T-VC is Juniper's fanless 12-port non-PoE compact switch with two 1/10GbE SFP/SFP+ uplinks and an included Virtual Chassis license.US$ 389.00
Condition: New Factory Sealed
EX2300-C-12P-VC is Juniper's fanless 12-port PoE+ compact switch with two 1/10GbE SFP/SFP+ uplinks and an included Virtual Chassis license.US$ 592.00
Condition: New Factory Sealed
PTX10004 is Juniper's compact 7RU, four-slot PTX10000 packet transport platform, rated from 57.6Tbps to 115.2Tbps system capacity with SF5 fabric.US$ 1,900.00
Condition: New Factory Sealed
PTX10008 is Juniper's 13RU, eight-slot PTX10000 packet transport platform, rated from 115.2Tbps to 230.4Tbps system capacity with SF5 fabric.US$ 1,850.00
Condition: New Factory Sealed
EX-SFP-GE80KCW1470 is a Juniper 1GbE CWDM SFP using the 1470nm channel over duplex LC single-mode fiber, with an 80km reach class and digital optical monitoring.Request current pricing
Condition: New Factory Sealed
EX-SFP-GE40KT15R13 is a Juniper 1GbE 1000BASE-BX SFP for 40km single-strand SMF, transmitting at 1550nm and receiving at 1310nm through a simplex LC connector.Request current pricing
- 1
- 10
- 11
- 12
- 13
- 14
- 23