HPE Wireless

Condition: New Factory Sealed

R4H38A is HPE Aruba Networking's AP-577 USF1 TAA outdoor Wi-Fi 6 order with internal directional antennas. The mount determines where the chassis points: HPE recommends H1 for wall mounting with tilt, while V1A and V2 point this model down. E0 supports 2.5Gbps and E1 supports 1Gbps. Specify the approved destination, mounting orientation and PoE configuration when requesting a quote.

Condition: Electronic license

JW473AAE is the HPE Aruba Networking LIC-PEF controller Policy Enforcement Firewall per-AP E-LTU software license. It enables context-based access policies on the controller; no AP or controller hardware is supplied. Quote the AP quantity, controller release and existing entitlements.

Condition: Electronic license

JW474AAE is the HPE Aruba Networking LIC-RFP controller RFProtect per-AP software license, supplied as E-LTU. RFProtect adds spectrum analysis and wireless intrusion protection; this order does not supply an access point or controller. Quote the AP count and existing license inventory.

Condition: New Factory Sealed

R4W30A identifies the HPE Aruba Networking AP-575EX EG order with internal omnidirectional antennas and dual-radio Wi-Fi 6. E0 supports 2.5Gbps and E1 supports 1Gbps; both can receive PoE. Confirm the power configuration and separately selected mounting bracket with the quote. Listed power injectors must remain outside classified areas, and the exact installation requires approval.

Condition: New Factory Sealed

R4H07A is the HPE Aruba Networking AP-518 RWF1 TAA order: a hardened Wi-Fi 6 access point with four external antenna connections for 5 GHz and two for 2.4 GHz. Its E0 SmartRate uplink reaches 2.5Gbps; E1 reaches 1Gbps. PoE supplies power, and the power source is sold separately. Request a quote with the deployment country and antenna plan.

Condition: New

JW635A is the Aruba 7005 RW FIPS/TAA-designated mobility controller. HPE lists this exact ordering code with four Gigabit ports and a 16-AP/1K-client designation; the separate 7005 installation guide provides the 1,024-user hardware reference. Confirm deployment mode and licenses before sizing.

Condition: New

JW634A identifies the US-region Aruba 7005 controller with four Gigabit copper ports. Its official ordering description uses a 16-AP/1K-client designation; use the separate installation guide and licensed deployment limits for capacity planning.

Condition: New

JW638A is the Aruba 7005 IL-region controller carrying the FIPS/TAA designation. HPE lists four Gigabit copper ports and a 16-AP/1K-client ordering description; confirm software, licenses and the intended deployment before sizing.

Condition: New

R7J46A identifies the HPE Aruba Networking AP-615-EG campus access point with internal antennas and a dual-radio, tri-band 2x2 Wi-Fi 6E design. Confirm the EG variant and permitted radio configuration for the deployment location.

Condition: Condition confirmed by quotation

HP J9421A is the MSM760 Access Controller for an MSM wireless network, not an access or aggregation switch. It has two 10/100/1000 RJ-45 Ethernet ports and an RJ-45 serial console. HPE announced end of sale for June 30, 2017.

Condition: License availability and entitlement confirmed by quotation

HP J9698AAE is the MSM720 Premium electronic license, not a controller or access point. This legacy ordering code appears in HPE's end-of-sale notice; confirm current entitlement and activation eligibility before ordering.

Condition: New Factory Sealed

R3K00ACM identifies the Aruba CM AP-AC2-12B external desktop AC/DC adapter. It is a power accessory, not Wi-Fi hardware. Verify the exact unit rating and connection before replacement.

Condition: New Factory Sealed

JX990ACM is the Aruba CM AP-AC-12V30B desktop AC/DC power adapter. HPE lists this accessory at 12 V/30 W in its Aruba 510 Series reference; it is not an access point.

Condition: New Factory Sealed

R3K00A identifies the HPE Aruba AP-AC2-12B external AC/DC desktop power adapter. It is a power accessory, not a wireless access point; confirm the offered unit label and device requirements before purchase.

Condition: Condition confirmed by quotation

R2H25A is the AP-505 (EG) indoor campus access point in the Aruba 500 Series, with internal antennas and two 2x2 Wi-Fi 6 radios.

Condition: Condition confirmed by quotation

JZ031A identifies the Aruba AP-345 (RW) unified campus access point with internal antennas. Its two 4x4 radios support conventional dual-band or optional dual-5-GHz operation, with a 2.5 GbE SmartRate and a separate 1 GbE uplink.

Condition: Condition confirmed by quotation

HPE lists JZ038A as the IL FIPS/TAA variant of AP-345. It is an internal-antenna campus access point with dual 4x4 MU-MIMO radios, not an AP22 or an external-connector AP-344.

Condition: Condition confirmed by quotation

The JZ036A order identifies Aruba AP-345 (JP) FIPS/TAA with internal antennas. The 340-series hardware has dual 4x4 MU-MIMO radios and distinct 2.5 GbE SmartRate and 1 GbE Ethernet interfaces.

Condition: Condition confirmed by quotation

JZ034A is HPE Aruba AP-345 (US) FIPS/TAA, an internal-antenna unified campus AP with two 4x4 MU-MIMO radios. Its SmartRate network port negotiates up to 2.5 GbE; a second port supports 1 GbE.

Condition: Condition confirmed by quotation

HPE identifies JZ039A as AP-345 (EG), a unified campus access point with internal antennas and dual 4x4 MU-MIMO radios. It uses the Aruba 340 platform and supports a 2.5 GbE SmartRate connection.