Ruckus Wireless

Condition: Entitlement confirmed by quotation

L09-0001-SG00 is a RUCKUS management license for one AP on the specified SmartZone platforms, not wireless hardware. The cited ordering reference lists SZ-100, vSZ 3.X, SCG200 and SZ300, for software from version 3.2.

Condition: Entitlement confirmed by quotation

909-0001-ZD12 adds one AP license to a RUCKUS ZoneDirector 1200 controller; it is not an access point or controller appliance. The documented expansion ceiling depends on the controller software release.

Condition: New Factory Sealed

RUCKUS 901-R850-WW00 is a dual-band Wi-Fi 6 indoor access point with 12 spatial streams and a 5Gbps-capable Ethernet port; power mode affects available functions.

Condition: New Factory Sealed

RUCKUS 901-H500-WW00 is an H500 wall-mounted dual-band 802.11ac access point with one Gigabit uplink and four 10/100Mbps wired ports.

Condition: Controller condition and active entitlement confirmed before purchase

901-1205-CN00 is the CN regional ZoneDirector 1205 WLAN controller ordering item, designated for up to five ZoneFlex access points. The desktop controller provides two 10/100/1000 Mbps Ethernet ports and an RJ-45 console; it is not itself an AP.

Condition: Legacy appliance condition and licenses confirmed by quotation

P01-S104-CN00 identifies the CN-region SmartZone 100 controller with four Gigabit Ethernet ports. It is a WLAN controller, not an access point. The two extra 10 Gigabit interfaces belong to the separately listed P01-S124 variant.

Condition: Legacy controller condition and license status confirmed by quotation

901-3025-CN00 is the CN regional order of the RUCKUS ZoneDirector 3025 WLAN controller, designated for up to 25 APs. It is a 1RU controller with two 10/100/1000 Mbps RJ-45 ports, not a wireless access point.

Condition: New Factory Sealed

RUCKUS 901-R510-WW00 is the worldwide-region R510 indoor wireless access point order identity. RUCKUS official ordering material describes the R510 as a dual-band 802.11a/b/g/n/ac AP with 2x2:2 streams, BeamFlex+, two Ethernet ports and 802.3af PoE support. It is an AP, not mounting bracket 902-0108-0000.

Condition: New Factory Sealed

RUCKUS 901-C110-AR00 is the exact C110 AR-region wall-plate AP/cable-modem order line. RUCKUS specifies 802.11ac Wave 2, 2x2:2, concurrent 2.4/5 GHz radios and DOCSIS; the official entry states that a power supply is not included.

Condition: New Factory Sealed

RUCKUS 9U1-R310-WW02 is a worldwide-region Unleashed R310 indoor access point. Official ordering material lists the 9U1-R310-XX02 family as dual-band 802.11ac, BeamFlex, 2x2:2, one Ethernet port and PoE, without a power adapter or PoE injector.

Condition: New Factory Sealed

RUCKUS 902-0124-0000 is the optional offset mounting bracket for the C110 wall-plate access point. The manufacturer guide positions it for locations without an electrical junction box and lists one plastic bracket plus two Torx screws; no C110 access point is included.

Condition: New Factory Sealed

RUCKUS 902-0108-0000 is the multipurpose secure mounting bracket specified for the R510. It supports hard-wall, ceiling, electrical-box, pole and truss mounting and provides padlock or security-Torx options. It does not include an access point.

Condition: New Factory Sealed

RUCKUS 902-0182-0003 is a weather-resistant aluminum outdoor access-point mounting kit for P300, T310c and T310d. The official guide specifies 180-degree adjustment in azimuth and elevation and wall, ceiling, or horizontal/vertical pole installation; it is an accessory, not an R720 access point.

Condition: New Factory Sealed

901-R700-WW00 is a worldwide-region RUCKUS R700 indoor access point, not an R720. The official R700 data sheet documents simultaneous dual-band 802.11ac 3x3:3 operation, data rates up to 450 Mbps at 2.4 GHz and 1300 Mbps at 5 GHz, BeamFlex+ adaptive antennas and 802.3af PoE operation.

Condition: New Factory Sealed

RUCKUS 902-1122-0000 is identified in the manufacturer M510 data sheet as the accessory flange mounting bracket. It is a separate mechanical accessory for an M510 installation, not the M510 access point, an LTE service, a power supply, a PoE injector or a software entitlement.

Condition: New Factory Sealed

RUCKUS 902-0125-0000 is a mounting kit for supported outdoor T-Series access points. The manufacturer accessory guide lists T310 variants, T350 variants, T610/T610s, T670, T710/T710s and T750, and identifies the supplied bracket and safety hardware; it is an installation accessory, not an access point.

Condition: New Factory Sealed

901-T301-WW61 is the worldwide-region T301n ordering variant: an outdoor dual-band 802.11ac 2x2:2 access point using a focused 30° x 30° narrow-beam antenna, one Gigabit Ethernet PoE input, an adjustable mounting bracket and a one-year limited warranty. The PoE injector is not included.

Condition: New Factory Sealed

901-T301-WW51 is the worldwide-region T301s ordering variant: an outdoor dual-band 802.11ac 2x2:2 access point with a 120° x 30° sector antenna pattern, one Gigabit Ethernet PoE input, an adjustable mounting bracket and a one-year limited warranty. The PoE injector is not included.

Condition: New Factory Sealed

901-T750-WW01 is the GPS-equipped worldwide-region Ruckus T750 outdoor Wi-Fi 6 access point with 4x4:4 radios, 2.5GbE copper and 1/10GbE SFP/SFP+ uplinks.

Condition: New Factory Sealed

901-T750-WW02 is the no-GPS worldwide-region Ruckus T750 outdoor Wi-Fi 6 access point with 4x4:4 radios, 2.5GbE copper and 1/10GbE SFP/SFP+ uplinks.