Wireless

Condition: New Factory Sealed

C9130AXI-EWC-D is the Cisco Catalyst 9130 internal-antenna EWC access-point order. The D domain is recommended for India, subject to separate approval checks. Evaluate its embedded-controller lifecycle, negotiated power and intended software mode before procurement.

Condition: New Factory Sealed

C9130AXI-EWC-G is a Cisco indoor Wi-Fi 6 AP with internal antennas and Embedded Wireless Controller. Its G regulatory-domain platform is recommended for Pakistan; approval must be checked separately. The exact EWC order is end of sale, with support subject to eligible terms.

Condition: New Factory Sealed

R4H38A is HPE Aruba Networking's AP-577 USF1 TAA outdoor Wi-Fi 6 order with internal directional antennas. The mount determines where the chassis points: HPE recommends H1 for wall mounting with tilt, while V1A and V2 point this model down. E0 supports 2.5Gbps and E1 supports 1Gbps. Specify the approved destination, mounting orientation and PoE configuration when requesting a quote.

Condition: Electronic license

JW473AAE is the HPE Aruba Networking LIC-PEF controller Policy Enforcement Firewall per-AP E-LTU software license. It enables context-based access policies on the controller; no AP or controller hardware is supplied. Quote the AP quantity, controller release and existing entitlements.

Condition: Electronic license

JW474AAE is the HPE Aruba Networking LIC-RFP controller RFProtect per-AP software license, supplied as E-LTU. RFProtect adds spectrum analysis and wireless intrusion protection; this order does not supply an access point or controller. Quote the AP count and existing license inventory.

Condition: New Factory Sealed

R4W30A identifies the HPE Aruba Networking AP-575EX EG order with internal omnidirectional antennas and dual-radio Wi-Fi 6. E0 supports 2.5Gbps and E1 supports 1Gbps; both can receive PoE. Confirm the power configuration and separately selected mounting bracket with the quote. Listed power injectors must remain outside classified areas, and the exact installation requires approval.

Condition: New Factory Sealed

R4H07A is the HPE Aruba Networking AP-518 RWF1 TAA order: a hardened Wi-Fi 6 access point with four external antenna connections for 5 GHz and two for 2.4 GHz. Its E0 SmartRate uplink reaches 2.5Gbps; E1 reaches 1Gbps. PoE supplies power, and the power source is sold separately. Request a quote with the deployment country and antenna plan.

Condition: New Factory Sealed

C9115AXI-I is the I-domain Cisco Catalyst 9115AXI controller-based Wi-Fi 6 access point with integrated antennas. Cisco explicitly lists this exact model in EU89685 Rev 7, issued 3 July 2026. Match the unit label and destination authorization separately; the declaration does not replace the PoE and controller plan.

Condition: New Factory Sealed

C9115AXI-T is the T regulatory variant of the Cisco Catalyst 9115AXI controller-based Wi-Fi 6 access point, with integrated antennas. Cisco names this exact PID in its Taiwan regulatory guidance. PoE source determines whether the AP operates with 4x4 radios and a 2.5GbE uplink or a reduced 2x2/1GbE state.

Condition: New Factory Sealed

C9105AXI-F is the F regulatory variant of the Cisco Catalyst 9105AXI indoor Wi-Fi 6 access point: integrated antennas, dual-band 2x2 radios and a 1GbE PoE uplink. Cisco publishes an exact-PID Indonesian certificate dated 24 July 2020; current country approval and the actual hardware VID must be verified before deployment.

Condition: New Factory Sealed

Huawei AP7030DE-DC is the AP7000 3x3 dual-band 802.11ac bundle with an AC/DC power adapter. It has two Gigabit Ethernet ports and built-in smart antennas; verify the adapter plug and power arrangement before ordering.

Condition: New Factory Sealed

Huawei R230D is an indoor R200 remote radio unit for distributed Wi-Fi, with dual-band 2x2 MIMO, one 10/100M Ethernet port and 802.3af PoE input. Confirm the central AP and software combination before ordering.

Condition: New Factory Sealed

Huawei AP2051DN-S is an AP2000 wall-plate Wi-Fi 5 access point with five Gigabit data ports, separate telephone pass-through connectors and USB. Verify the regional version, wall-box clearance and power budget.

Condition: New Factory Sealed

Huawei AP4030DN-E is an indoor Wi-Fi 5 AP with 2x2 MIMO at 2.4 GHz, 3x3 at 5 GHz and two Gigabit ports. GE0 accepts PoE; 12 V DC has priority. Verify standalone versus adapter bundle.

Condition: New Factory Sealed

Huawei AP6050DN is an AP6000 indoor Wi-Fi 5 access point with dual-band 4x4:4 MIMO and two Gigabit ports. Only one GE port accepts 802.3at PoE; verify the 12 V DC option and delivered part code.

Condition: New Factory Sealed

Huawei AP7052DE is a dual-band 4x4 Wi-Fi 5 AP with integrated smart antennas and 5GE plus GE copper ports. Check its 74.5 mm enclosure height and conditional dual-PoE backup behavior.

Condition: New Factory Sealed

Huawei AP6750-10T combines 2x2/2x2/4x4 Wi-Fi 5 radios, two Gigabit ports and USB expansion. Its 12 V DC and one-port 802.3at options do not provide hot backup.

Condition: New Factory Sealed

Huawei AirEngine 8760-X1-PRO supports configurable Wi-Fi 6 radios with two 10GE copper ports and SFP+. Verify single/dual PoE classes: available network ports and radio capacity depend on the power mode.

Condition: New Factory Sealed

Huawei AP7052DN offers switchable dual-band or dual-5 GHz radios, 5GE plus GE copper ports and an IoT slot. Confirm equal-capability PoE backup conditions and the exact regional mainframe.

Condition: New Factory Sealed

Huawei AP6150DN uses four external RP-SMA-K antenna connectors and 4x4:4 Wi-Fi 5 radios. Confirm the antenna kit, one-port 802.3at input and 12 V DC power option for your installation.