Brand procurement
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Recently updated

Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.

Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.

Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.

Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.

Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.

Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.

ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.

ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
ACX2100-DC is the DC-powered ACX2100 with 16 T1/E1 interfaces, Gigabit Ethernet access ports and two 10GbE SFP+ uplinks for legacy-service migration and metro access.US$ 4,825.00
Condition: New Factory Sealed
EX3400-24T is the 24-port non-PoE EX3400 model with four SFP/SFP+ and two QSFP+ uplinks for compact data-only access deployments.US$ 1,516.00
Condition: New Factory Sealed
EX3400-24P combines 24 Gigabit Ethernet PoE/PoE+ ports with four SFP/SFP+ and two QSFP+ uplinks for smaller powered access locations.US$ 2,085.00
Condition: New Factory Sealed
EX3400-48T provides 48 non-PoE Gigabit Ethernet access ports, four SFP/SFP+ uplinks and two QSFP+ ports for dense data-only access networks.US$ 2,411.00
Condition: New Factory Sealed
EX3400-48P provides 48 Gigabit Ethernet PoE/PoE+ access ports, four SFP/SFP+ uplinks and two QSFP+ ports for high-density powered edge deployments.US$ 3,885.00
Condition: New Factory Sealed
ACX500-O-AC is the non-PoE, AC-powered outdoor ACX500 with an IP65 enclosure, three copper GbE and three SFP GbE interfaces.US$ 26,482.00
Condition: New Factory Sealed
ACX500-O-DC is the non-PoE, DC-powered outdoor ACX500 with an IP65 enclosure, three copper GbE and three SFP GbE interfaces.US$ 26,482.00
Condition: New Factory Sealed
ACX500-O-POE-AC is the AC-powered, IP65 outdoor ACX500 with three copper GbE, three SFP GbE and an 80 W PoE power allowance.US$ 26,482.00
Condition: New Factory Sealed
ACX500-O-POE-DC is the DC-powered, IP65 outdoor ACX500 with three copper GbE, three SFP GbE and an 80 W PoE power allowance.US$ 16,588.00
Condition: New Factory Sealed
ACX5448-DC-AFI is a Juniper ACX5448 universal metro router order with 48 SFP+/SFP ports and 4 QSFP28 ports, redundant DC power supplies and AFI airflow in, from the FRU side toward the port side.US$ 55,486.00
Condition: New Factory Sealed
ACX5448-AC-AFO is a Juniper ACX5448 universal metro router order with 48 SFP+/SFP ports and 4 QSFP28 ports, redundant AC power supplies and AFO airflow out, from the port side toward the FRU side.US$ 55,486.00
Condition: New Factory Sealed
ACX5448-D-DC-AFO is a Juniper ACX5448-D coherent metro router order with 36 SFP+/SFP ports, 2 CFP2 ports and 2 QSFP28 ports, redundant DC power supplies and AFO airflow out, from the port side toward the FRU side.US$ 60,563.00
Condition: New Factory Sealed
ACX5448-D-AC-AFO is a Juniper ACX5448-D coherent metro router order with 36 SFP+/SFP ports, 2 CFP2 ports and 2 QSFP28 ports, redundant AC power supplies and AFO airflow out, from the port side toward the FRU side.US$ 60,563.00
Condition: New Factory Sealed
ACX5448-D-AC-AFI is a Juniper ACX5448-D coherent metro router order with 36 SFP+/SFP ports, 2 CFP2 ports and 2 QSFP28 ports, redundant AC power supplies and AFI airflow in, from the FRU side toward the port side.US$ 60,563.00
Condition: New Factory Sealed
ACX7300-2CD4C is Juniper's ordering code for the ACX7K3-FPC-2CD4C pluggable Flexible PIC Concentrator. It provides six front-panel ports: two 400GbE and four 100GbE, with supported lower-speed operating modes documented by Juniper.US$ 36,940.00
Condition: New Factory Sealed
QFX5100-96S-DC-AFI is the DC-powered, air-in version of the Juniper QFX5100-96S. Its official order row specifies 96 SFP+ and eight QSFP+ positions, two management ports, and FRU-to-port airflow.US$ 8,000.00
Condition: New Factory Sealed
QFX5100-96S-AFO is the AC, air-out order of the Juniper QFX5100-96S. Juniper lists 96 SFP+ and eight QSFP+ transceiver positions, two management ports, and airflow from the ports toward the field-replaceable units.US$ 8,000.00
Condition: New Factory Sealed
QFX5110-48S-AFO is Juniper's 1U AC QFX5110 switch with 48 SFP+ ports, four QSFP28 ports and front-to-back airflow (ports to FRUs). Juniper lists 1.76 Tbps bidirectional throughput and 1.32 Bpps forwarding capacity for this 48S variant.US$ 8,000.00
Condition: New Factory Sealed
ACX-MIC-16CHE1-T1-CE is Juniper's 16-port channelized E1/T1 circuit-emulation MIC for the ACX4000 router. It uses RJ-48 interfaces and requires 26.55 W; verify ACX4000 lifecycle and Junos compatibility before procurement.US$ 2,771.00
Condition: New Factory Sealed
NFX350-S1-AC is a Juniper NFX350-S1 network services platform with an 8-core Intel Skylake Xeon-D processor, QAT, 32 GB RAM, AC power and the Junos standard security software license.US$ 4,333.00