Brand procurement
JUNIPER Products and Procurement
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Priority model guides
JUNIPER Exact Model Guides
Recently updated
Recently Updated JUNIPER Products
Juniper SRX4100-E-P-UPG Enhanced Performance Upgrade License
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.
Juniper S-ACX-400G-A-1 Advanced Subscription Renewal License
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.
Juniper S-ACX-400G-P-1 Premium Software Renewal License
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.
Juniper ACX5448-L-PE FIB and VRF Scale Feature License
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.
Juniper ACX500-LIC-SEC IPsec and NAT Feature Activation License
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.
Juniper ACX500-LIC-GPS Receiver Activation License
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.
Juniper ACX5448-D-FAN-AFI Airflow-In Fan Module
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.
Juniper ACX5448-FAN-AFO Front-to-Back Fan Module
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER Procurement Guide
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Junos and license requirements before ordering.
- Confirm port, optics and airflow compatibility before ordering.
- Confirm power option, TAA requirement and support status before ordering.
How to compare JUNIPER models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Software performance entitlement; confirm eligibility before purchase
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.US$ 14,364.00
Condition: Electronic subscription renewal; confirm eligibility before purchase
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.US$ 56,940.00
Condition: Electronic subscription renewal; confirm eligibility before purchase
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.US$ 55,486.00
Condition: Electronic license; confirm entitlement before purchase
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.US$ 16,040.00
Condition: License eligibility to be confirmed by quotation
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.US$ 26,482.00
Condition: License eligibility to be confirmed by quotation
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.US$ 2,771.00
Condition: New Factory Sealed
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.Request current pricing
Condition: New Factory Sealed
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.US$ 16,040.00
Condition: New Factory Sealed
ACX5448-FAN-AFI is a Juniper airflow-in fan module for the ACX5448 platform, not a complete router. AFI directs air from the rear fan side toward the front ports. Juniper identifies this order with AIR IN and blue markings; its airflow must match the installed power modules. The official Series fan-module drawing is a reference, not a photograph of the supplied AFI unit.US$ 16,040.00
Condition: New Factory Sealed
ACX7509-FPC-4CD is a Juniper line card for the ACX7509 chassis with four QSFP56-DD ports, not a complete router. The exact interface guide permits this card only in slots 1 and 5: native 400GbE or 4x100GbE using suitable breakout cables, with 400GbE as the default. Confirm the slot and optical configuration before ordering. The official Series illustration retains its JNP-FPC-4CD label and is not the supplied-unit photograph.US$ 39,247.00
Condition: New Factory Sealed
ACX7509-FPC-20Y is a Juniper 20-port line card for the ACX7509 chassis, not a complete router. Its 20 SFP56 ports are covered by the exact interface guide: 1/10/25GbE in slots 0, 2, 3, 4, 6 and 7; 10/25GbE in slots 1 and 5. That guide does not support channelization for this card. The official Series diagram is labelled JNP-FPC-20Y, not a photograph of the supplied unit.US$ 39,247.00
Condition: New Factory Sealed
ACX7509-FPC-16C is a Juniper line card for the ACX7509 chassis, not a complete router. It has 16 QSFP28 ports for 40/100GbE, but usable ports depend on the chassis slot: all sixteen in slots 1 and 5, selected ports elsewhere, and seven listed ports in slot 7. Verify the slot, optics and breakout configuration. The official Series diagram is labelled JNP-FPC-16C; it is not a photograph of the supplied unit.US$ 39,247.00
Condition: New Factory Sealed
EX2300-48MP-VC is Juniper’s 48-port mixed-speed access-switch order: thirty-two Gigabit copper ports, sixteen 2.5GbE-capable copper ports and six 1/10GbE SFP/SFP+ uplinks. The packing list names a paper Virtual Chassis license. Confirm endpoint power allocation and serial-specific support after its September 2026 last-order milestone.US$ 1,652.00
Condition: New Factory Sealed
Juniper EX2300-24MP-VC combines sixteen Gigabit and eight 2.5GbE-capable copper ports with four 1/10GbE SFP/SFP+ uplinks. Its manufacturer packing list includes a paper Virtual Chassis license. Check the 380 W shared PoE budget, license delivery and post-last-order support for the actual quoted unit.US$ 1,071.00
Condition: New Factory Sealed
Juniper EX3400-24P-TAA specifies 24 Gigabit PoE+ ports, four 1/10GbE SFP/SFP+ and two 40GbE QSFP+ positions. The exact order includes one JPSU-600-AC-AFO supply with front-to-back airflow. Its 24P platform provides 370 W PoE with one 600 W supply; verify optics and the actual power configuration in the quote.US$ 1,046.00
Condition: New Factory Sealed
Juniper EX2300-24P-TAA is the TAA-designated 24-port Gigabit PoE+ order with four 1/10GbE SFP/SFP+ uplinks and a 370 W shared PoE budget. Its last-order date was 30 September 2026. Check the exact unit, support eligibility, optics and any Virtual Chassis license before requesting a quote.US$ 805.00
Condition: New Factory Sealed
EX4300-48MP combines 24 Gigabit copper ports with 24 multigigabit copper ports up to 10Gbps. Its original Juniper order includes a 1400 W AC supply and up to 1100 W shared PoE output. Four built-in 40Gbps ports serve Virtual Chassis only; Ethernet uplinks require a separate optional module.US$ 3,023.00
Condition: New Factory Sealed
EX4300-48T-AFI is the rear-intake, front-exhaust version of Juniper’s non-PoE 48-port Gigabit switch. The original configuration pairs two AIR IN fans with one 350 W AC AIR IN supply; confirm matching modules and legacy support in your quote.US$ 2,744.00
Condition: New Factory Sealed
EX4300-48T is Juniper’s non-PoE 48-port Gigabit Ethernet switch with four built-in 40GbE QSFP+ ports. Its original base package uses a 350 W AC supply and AIR OUT fans; verify legacy support entitlement and optional uplinks when requesting a quote.US$ 2,200.00
Condition: New Factory Sealed
EX4300-24T-TAA is Juniper’s TAA-designated ordering line for a 24-port non-PoE Gigabit EX4300 switch with a 350 W AC supply. Its manufacturer order lists Virtual Chassis cables and optics separately. Verify the exact unit, required procurement documents and legacy support before requesting a quote.US$ 1,762.00
- 1
- 2
- 3
- 4
- 5
- 6
- 23