Enterprise IT Network Hardware Products - Page 15

Condition: New Factory Sealed

ClickShare X-Display Plus 65 combines a 65-inch 4K LCD, camera, microphone array and room speakers with a ClickShare CX-M module. It is an integrated meeting display, not an enterprise network switch. Barco limits availability to mainland China, Hong Kong and Macau.

Condition: Regional availability and condition require confirmation

Barco identifies ClickShare Wireless Speakerphone as article R9861660DM. It combines eight beamforming MEMS microphones with a 4 W speaker for meeting audio, rather than providing WLAN coverage. Manufacturer availability is limited to mainland China, Hong Kong and Macau.

Condition: Legacy unit; verify condition and regional article

WiCS-2100 is a wePresent wireless presentation receiver, not a campus network controller. It displays up to four shared sources through a 1080p HDMI output. Barco marks the product end of life and states that XMS Cloud no longer supports it.

Condition: Verify regional article, generation and condition before order

This C-5 listing specifies Barco’s Gen 2 ZH presentation unit, identified in the manufacturer’s ordering list as R9861605ZH. It shares one source on the meeting-room display and is not a campus access point or WLAN controller.

Condition: Finish, condition and kit contents confirmed by quotation

STS-K002L is Contacta’s surface-mounted window intercom for quieter counters and booths. Separate customer-side speaker and microphone units work with an open-duplex amplifier, staff microphone/loudspeaker and counter hearing loop. It is not a network switch.

Condition: Condition and kit contents confirmed by quotation

STS-K009-IP-L-B is Contacta’s entry intercom kit with an IP55 surface-mounted customer call unit, open-duplex speech amplifier, staff unit and hearing loop. The front call button alerts staff while the communication channel remains hands-free.

Condition: Condition and supplied listening accessories confirmed by quotation

IR-RX2 is Contacta’s portable infrared receiver for assistive listening, supporting the manufacturer’s 2.3 MHz and 2.8 MHz transmitters. It uses rechargeable batteries and requires headphones or an assistive neck loop; it is not an Ethernet switch.

Condition: Condition and package contents confirmed by quotation

IR-RX2-DC5 is a five-position charging base for Contacta portable listening receivers, including IR-RX2. It is a charger accessory, not a network switch. Expansion to twenty receivers requires four bases and the approved higher-current power supply.

Condition: Condition and supplied accessories confirmed by quotation

RF-DC6-865/915 is Contacta’s six-position drop-in charger and programming station for RF-RX1 receivers and RF-TX1 transmitters. Choose the regional 865 MHz or 915 MHz version to match the devices; the slash does not identify a universal dual-band unit.

Condition: Condition and included assemblies confirmed by quotation

CHAS-MP-PTX3000-S is the PTX3000 spare chassis identified in Juniper’s hardware-component table. It houses the router assemblies; this chassis order alone does not specify an operational router configuration or forwarding capacity.

Condition: Condition and included components confirmed by quotation

EX3400-24T-TAA is Juniper’s TAA-designated 24-port copper Ethernet switch with four 1/10GbE SFP/SFP+ uplinks and two 40GbE QSFP+ ports. The ordering row specifies front-to-back airflow and one JPSU-150-AC-AFO power supply; optics are separate.

Condition: Condition and supplied components confirmed by quotation

ACX500-DC is the DC-powered ACX500 router, using passive cooling and weighing up to 3.9 kg. Juniper lists 65 W device power plus an 80 W PoE allowance for this configuration.

Condition: Condition and supplied fasteners confirmed by quotation

EX2300-C-CBL-GRD is the optional cable guard for Juniper EX2300-C switches. Its front slots route connected cables to help prevent accidental unplugging; this order is a physical accessory, not a switch or a software subscription.

Condition: Condition and supplied components confirmed by quotation

SRX4100-SYS-JE-DC is the two-DC-supply SRX4100 system with Junos Software Enhanced, eight 10GbE interfaces and four fan trays. It is a security gateway, not a campus switch.

Condition: Condition and supplied components confirmed by quotation

SRX4100-SYS-JE-AC combines SRX4100 security-gateway hardware with Junos Software Enhanced. The original package specifies eight 10GbE interfaces, two AC supplies, four fan trays, cables and a rack kit.

Condition: Condition and included components confirmed by quotation

QFX5100-96S-DC-AFO is the DC-powered, front-to-back airflow version of the 2U QFX5100-96S aggregation switch. It has 96 SFP/SFP+ ports and eight QSFP+ ports, not security-appliance interfaces.

Condition: Condition confirmed by quotation

EX2300-24MP is an Ethernet access switch with eight 2.5GbE-capable copper ports, sixteen Gigabit copper ports and four SFP/SFP+ uplinks. Its shared PoE budget is 380 W; it is not a security appliance.

Condition: Condition and installed components confirmed by quotation

EX4300-32F combines 32 SFP access ports with four built-in 10-Gigabit SFP+ and two built-in 40-Gigabit QSFP+ ports. This AC-powered fiber model has no PoE; extra uplink ports require an optional module.

Condition: Accessory condition and completeness confirmed by quotation

SRX240-RMK is Juniper’s rack-mount kit for one SRX240 gateway in a 19-inch rack. It is a mounting accessory, not a network switch or security appliance.

Condition: Condition and availability confirmed by quotation

S1720-10GW-2P-E is a Huawei managed access switch, not a Cisco product. It combines eight copper Gigabit downlinks with two Gigabit optical uplinks and supports web, SNMP and command-line management.