AP7060DN Huawei AP7000 Series 802.11ax 2.4G 4x4 + 5G 8x8 Dual Bands AP

An indoor AP with a dedicated multigigabit uplink

Huawei AP7060DN is an indoor 802.11ax access point with integrated omnidirectional antennas. Its radio configuration combines four spatial streams on 2.4 GHz with eight spatial streams on 5 GHz. The AP has one multigigabit RJ-45 uplink supporting 100M, 1G, 2.5G, 5G and 10G, alongside a separate Gigabit Ethernet interface. This distinction matters when checking the switch connection: the two copper interfaces do not have the same maximum speed.

Use the exact-model radio figures for capacity planning

The AP7060DN datasheet specifies radio rates up to 1.15 Gbit/s on 2.4 GHz and 4.8 Gbit/s on 5 GHz, giving an aggregate PHY rate up to 5.95 Gbit/s. These are radio signaling rates across two bands, not a guaranteed throughput for one client. A suitable client, channel width, local radio rules and available wired capacity determine usable performance. The 5 GHz receive tables distinguish eight-stream 80 MHz operation from four-stream 160 MHz operation; an eight-stream specification does not mean eight streams at every channel width.

Size the power supply before adding USB or IoT equipment

The official datasheet identifies an 802.3bt PoE supply and a 45–57 V DC input. It lists maximum AP consumption of 30 W excluding USB and IoT output power. Include attached peripheral loads when choosing the supply rather than treating 30 W as the total budget for every configuration. USB and the external IoT module interface provide expansion options; the module, power adapter and installed applications must be checked in the quotation and are not implied by the AP model alone.

Match the mounting environment and management arrangement

The documented mainframe order code is 02351TYR. Its enclosure is 220 x 220 x 57 mm and weighs 1.8 kg, with IP41 protection and an operating range of -10 to 50 degrees Celsius. It is an indoor unit, so IP41 should not be treated as an outdoor weatherproof rating. Huawei describes Fat, Fit and Cloud modes; confirm the actual firmware, controller or cloud compatibility and management entitlement for the intended installation. Built-in BLE 5.0 is distinct from an optional external IoT module. Request confirmation of the supplied mainframe, mounting pieces, power accessories, software support and condition before ordering.

Huawei AP7060DN official datasheet (Russian, 2019)