


AirEngine 5760-51 is a HUAWEI wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: AirEngine 5760-51 Huawei AirEngine 5700 WiFi 6 2+4 Dual-band AP. Category: Huawei AirEngine 5700 Series Access Points. Condition: New Factory Sealed.
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x depth: 220 mm x 51 mm (8.66 in. x 2.01 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 94 mm x 306 mm x 285 mm (3.70 in. x 12.05 in. x 11.22 in.) |
| Weight without packaging [kg(lb)] | 1.15 kg (2.53 lb) |
| Storage | NAND Flash 512 MB; NOR Flash 16 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 28.8 (excluding USB and IoT cards) |
| Maximum heat dissipation [BTU/hour] | 98.3 (without USB or IoT card) |
| Power supply mode |
|
| Rated input voltage [V] | 48 V |
| Input voltage range [V] | DC: 43.2 V to 57.6 V PoE: 802.3bt/at |
| Service port surge protection | PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| PoE OUT | Not supported |
| Maximum number of physical ports on the entire device | 5GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Grounding |
| USB | USB 2.0 |
| IoT slot | IoT card |
| BLE | BLE5.2 |
| Radio number | 2/3 |
| Operating frequency band |
|
| MIMO spatial streams | Triple-radio mode:
Dual-radio mode:
|
| Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | Built-in smart antennas |
| Antenna gain | 2.4 GHz: 4.5 dBi 5 GHz: 5.5 dBi BLE: 4 dBi |
| Maximum transmit power | 2.4 GHz: 26 dBm 5 GHz: 26 dBm (Note: This is the total MIMO radio power, the same as: 2.4 GHz: 20 dBm/chain 5 GHz: 20 dBm/chain) BLE: < 10 dBm |
| Singal radio transmit power [dBm] | 2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 69.7 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | For 802.3bt class 6/class 8 power supply: If an RTU license is loaded, no function is restricted. If no RTU license is loaded, Wi-Fi supports only the following mode and other functions are not restricted:
|
| 802.3at power supply description | With an RTU license loaded: Wi-Fi: If the USB and IoT card slots are not used, the radio transmit power is not affected.
If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. Wired network port: The speed of the 5GE electrical port is reduced to 2.5GE or lower. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.) Other ports: Either the 5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in dual-radio mode and the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. Without an RTU license loaded: Wi-Fi: If no USB or IoT card slot is used, the radio transmit power is not affected.
If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. Wired network port: The speed of the 5GE electrical port is reduced to 2.5GE or lower. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.) Other ports: Either the 5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in dual-radio mode and the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. |
| DC power supply description | If an RTU license is loaded, no function is restricted. If no RTU license is loaded, Wi-Fi supports only the following mode and other functions are not restricted:
|
| Exact product model | AirEngine 5760-51 |
| Product family | Huawei AirEngine/AP wireless access point |
| Official Huawei documentation | Huawei Enterprise Support results for AirEngine 5760-51 |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |
AirEngine 5760-51 Huawei AirEngine 5700 WiFi 6 2+4 Dual-band AP is a HUAWEI AirEngine 5700 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For AirEngine 5760-51, the manufacturer specification lists dimensions without packaging (h x w x d) [mm(in.)] as Diameter x depth: 220 mm x 51 mm (8.66 in. x 2.01 in.).
For AirEngine 5760-51, the manufacturer specification lists storage as NAND Flash 512 MB; NOR Flash 16 MB.
AirEngine 5760-51 is in stock at YYST Global. Contact the sales team to confirm the required quantity, exact configuration, delivery destination and current lead time before ordering.
The current reference price for AirEngine 5760-51 is US$ 279.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

Huawei AirEngine 5760-22WD (part 02353KDQ) is an indoor Wi-Fi 6 wall-plate access point with smart antennas, a 2.5GE copper PoE uplink, a 1G/10G SFP+ optical uplink, four GE downlinks including one PoE output, and an RJ45 pass-through pair.

AirEngine 5760-10 is a Huawei indoor Wi-Fi 6 access point with 2x2 MIMO, simultaneous 2.4 GHz and 5 GHz service, built-in Smart Antennas and a maximum published device rate of 1.774 Gbit/s.

AirEngine 5760-22W HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.

Huawei AirEngine 5761RS-11 is an IP68 outdoor Wi-Fi 6 access point with built-in directional antennas, concurrent 2.4 GHz and 5 GHz 2x2 radios, a 1.775 Gbit/s maximum device rate, one GE copper PoE input and one Gigabit SFP optical uplink.

Huawei AirEngine 5761S-13 is an indoor dual-radio Wi-Fi 6 access point with four spatial streams, a 1.775 Gbit/s maximum device rate, one GE uplink, built-in smart antennas, USB expansion and BLE 5.2. Huawei specifies 15.3 W maximum consumption excluding USB and up to 27 dBm combined transmit power per band, subject to local regulation.

Huawei AirEngine 5761S-12 is an indoor dual-radio Wi-Fi 6 access point with 2x2 operation on both 2.4 GHz and 5 GHz, four total spatial streams, a maximum device rate of 1.775 Gbit/s, one GE uplink, a built-in smart antenna, USB expansion and BLE 5.2.

AirEngine 5761S-21 part 02354VQL is a Huawei indoor Wi-Fi 6 access point using 2.4 GHz 2x2 and 5 GHz 4x4 radios with smart antennas. It provides 2.5GE PoE input, a secondary GE port, USB and Bluetooth; the usable interface and radio set changes under 802.3af power.

AirEngine 5761-21 (part 02354VQK) is a Huawei indoor 802.11ax access point with 2+4 dual-band radios, smart antennas, USB and Bluetooth. Huawei documents a 2.5GE/PoE input interface plus GE, USB and 12 V DC connections; region and deployment dependencies require project verification.