AP7052DN Huawei AP7000 Series 802.11ac Wave2 Indoor 4X4 Dual-Band AP

Select between mixed-band and dual-5 GHz operation

Huawei AP7052DN is an AP7000-series indoor Wi-Fi 5 access point with built-in omnidirectional antennas. Its radio arrangement is a switchable 2.4 GHz/5 GHz 4x4 radio plus a second 5 GHz 4x4 radio. This permits 2.4 GHz plus 5 GHz or two 5 GHz radios. Dual-5 GHz describes a radio mode, not 6 GHz support. Review the client mix before selecting a layout: moving the switchable radio to 5 GHz changes the band available to 2.4 GHz-only clients.

A 5GE connection and a separate Gigabit connection

The physical network interfaces differ. One RJ-45 connection negotiates 100M, 1G, 2.5G or 5G, while the second negotiates 10M, 100M or 1G. Both are copper ports; the maximum stated uplink is 5GE rather than 10GE. There is a separate RJ-45 console. Verify the switch port speed and cable arrangement for the chosen uplink instead of treating both network sockets as interchangeable multigigabit ports.

Dual PoE input has conditional backup behavior

Huawei lists two PoE inputs supporting 802.3at/802.3bt and a 42.5–57 V DC input. When the two Ethernet power inputs offer equal power capability, hot backup is supported without a fixed primary/standby relationship. With unequal capabilities, Huawei states that hot backup is not available and power management follows the higher-capability input. DC and GE/PoE_IN support hot backup without priority distinction. These conditions do not justify adding input wattages into an assumed combined power budget. AP consumption is listed as 33 W excluding USB; verify the intended peripheral load and supply configuration.

Plan the IoT module as a separately verified component

The AP provides one IoT expansion slot supporting UART. Huawei explicitly states that MiniPCIe is not hot-swappable, so a module change must follow the applicable maintenance instructions. The exact mainframe record reviewed is 02351KDV; AP7052DN-USA is separately listed as 02351KEA, so region and supplied code must be confirmed rather than inferred. AP7052DN measures 220 x 220 x 52 mm, weighs 1.68 kg and is IP41 for indoor use. Its -10 to 50 degree Celsius range is derated above 1800 m by 1 degree per 300 m. Confirm mounting pieces, power supplies, IoT module and management compatibility in the quotation.

Huawei exact-model hardware specifications