AirEngine 5761S-11W-Huawei Wi-Fi 6（802.11ax）for High-density scenarios

Wire the room without confusing switched and pass-through ports

AirEngine 5761S-11W is a Huawei wall-mounted Wi-Fi 6 access point, identified by hardware part 50084453. It provides one Gigabit uplink and four Gigabit downlinks. A separate pair of RJ-45 pass-through sockets carries an Ethernet or telephone cable connection through the unit; these are not two additional switched Gigabit interfaces. Plan the wall cabling and endpoint connections around that distinction.

Choose input power to retain USB operation

The exact hardware record supports 12 V DC, within a ±10% input range, and IEEE 802.3af or 802.3at PoE. Under 802.3af, USB is unavailable while the other functions remain unrestricted; 802.3at and DC are listed without that feature restriction. The USB 2.0 port supports 2.5 W or 5 W output. Huawei specifies maximum AP consumption of 12.7 W excluding USB, subject to regional regulatory differences. Include peripheral consumption when checking the upstream power budget.

Check wall clearance and endpoint power separately

This model does not provide PoE output, so a connected phone or other endpoint needs its own suitable power source. Its enclosure measures 86 x 38 x 160 mm and weighs 0.300 kg. Confirm mounting clearance, cable routing and the proposed power adapter or injector before requesting a quotation; this listing does not establish accessory inclusion.

Use the exact radio and management capabilities

Two 2x2 radios serve 2.4 GHz and 5 GHz using built-in smart antennas. BLE 5.2 and a Bluetooth console are available, but there is no IoT expansion slot. The hardware record lists V200R020C10 as the starting supported version; check the intended controller and software combination separately rather than assuming compatibility with every AirEngine deployment.

Huawei exact-model hardware specifications | Huawei exact-model hardware specifications