AirEngine 8760-X1-PRO Huawei AirEngine 8700 Series Wi-Fi 6 AP

Choose the radio arrangement before the power architecture

Huawei AirEngine 8760-X1-PRO is an indoor AirEngine 8700-family Wi-Fi 6 access point with integrated smart antennas. In dual-radio mode, 2.4 GHz is 4x4 with up to 40 MHz bandwidth; the 5 GHz radio supports 12x12 at up to 80 MHz or 8x8 at up to 160 MHz. A three-radio arrangement uses 2.4 GHz 4x4, high-band 5 GHz 4x4 and low-band 5 GHz 8x8. The third radio remains in 5 GHz and does not provide a 6 GHz band.

Three physical network ports are not always three active ports

The chassis has two 10GE RJ-45 ports that negotiate from 10M through 10G, plus a GE/10GE SFP+ optical interface. Huawei lists unrestricted functionality with DC or 802.3bt Class 8 power. Under a single Class 6 PoE input, the two copper interfaces and the optical interface form a three-way combo: only one is active. Dual Class 6 inputs remove that wired-port restriction. In both Class 6 arrangements, USB or an IoT card can affect radio streams, power and bandwidth, so verify the actual peripheral combination.

Single and dual 802.3at modes have different optical limits

For 802.3at input, the copper interfaces operate at Gigabit or below. With two 802.3at inputs, the optical interface is unavailable. With a single 802.3at input, the copper and optical interfaces are a three-way combo instead. Without USB or IoT, documented reduced radio layouts include 2.4 GHz 2x2 plus 5 GHz 4x4, or a three-radio 2x2/2x2/2x2 layout. Only a 2.5 W USB load or an IoT card is supported, with IoT taking priority; peripherals impose additional radio restrictions. Confirm the complete mode rather than assume that adding a second PoE cable enables full radio performance.

Identify the order code and input behavior at procurement

Huawei lists 02353GSG from V200R019C10 and 02353GSG-001 from V200R021C10SPC100. Confirm the supplied code and matching controller software. The rated DC input is 48 V, with a 43.2–57.6 V range. With two PoE inputs, equal types provide backup and unequal types use the higher input type; no combined wattage is implied. Maximum consumption is 55 W excluding USB and IoT. The 220 x 220 x 61 mm unit weighs 1.85 kg and provides USB 2.0, an IoT slot and BLE 5.2, but no PoE output. Mounting hardware, power equipment, optical module and software entitlement require explicit quotation confirmation.

Huawei exact-model hardware specifications | Huawei exact-model hardware specifications