AP7052DE Huawei AP7000 802.11ac Wave 2 4x4 MIMO Access Point

The DE model uses integrated smart antennas

Huawei AP7052DE is the AP7000 mainframe identified by code 02351QCW. It pairs 2.4 GHz 4x4 with 5 GHz 4x4 and uses built-in omnidirectional smart antennas. The 5 GHz radio supports 802.11ac Wave 2; the 2.4 GHz radio supports 802.11b/g/n. This exact DE record specifies a dual-band arrangement, so the switchable dual-5 GHz arrangement documented for AP7052DN should not be transferred to it.

Check the taller enclosure and its power budget

The AP7052DE measures 220 x 220 x 74.5 mm and weighs 1.75 kg. Huawei lists 35.7 W consumption excluding USB. These figures differ from the thinner AP7052DN and affect mounting clearance and power planning. IP41 defines an indoor enclosure; the supported operating range is -10 to 50 degrees Celsius, with the upper temperature reduced by 1 degree per 300 m above 1800 m up to 5000 m.

Match the uplink speed to the correct connector

A multigigabit copper port supports 100M/1G/2.5G/5G, while the second copper port supports 10M/100M/1G. The separate RJ-45 console is for management. Check the actual switch negotiation and cable run before assigning a 5GE uplink. The presence of two network connections does not make both of them 5GE or establish that the console is a network uplink.

Redundant power depends on equal input capabilities

The hardware record permits two PoE inputs with 802.3at/802.3bt and a 42.5–57 V DC input. Two Ethernet power sources with the same capability support hot backup without a fixed primary/standby relationship. Unequal capabilities do not provide hot backup; power management follows the higher-capability input. DC and GE/PoE_IN also support hot backup without priority distinction. Do not infer an additive power budget from two connected sources. Confirm the source capabilities, actual mainframe, mounting pieces and software compatibility before ordering; a supplied adapter or license is not implied.

Huawei exact-model hardware specifications