Enterprise IT Network Hardware Products - Page 14

Condition: New Factory Sealed

C9200L-48T-4X-E is a 48-port Gigabit data switch with four fixed 1/10G uplinks and Network Essentials. It uses StackWise-80 and fixed fans, with 176 Gbps standalone capacity and 130.95 Mpps forwarding at 64-byte packets.

Condition: New Factory Sealed

Cisco C9200L-48T-4X-A has 48 Gigabit data access ports, four fixed 1/10G uplinks and Network Advantage. The official standalone forwarding rate is 130.95 Mpps at 64-byte packets; 261.9 Mpps is not the published rate for this model.

Condition: New Factory Sealed

C9200L-24T-4X-A is the Network Advantage order for 24 Gigabit data-only access ports and four fixed 1/10G uplinks. Its standalone capacity is 128 Gbps and packet forwarding is 95.23 Mpps, measured with 64-byte packets.

Condition: New Factory Sealed

C9200L-48P-4G-A provides 48 Gigabit PoE+ access ports, four fixed 1G uplinks and Network Advantage. Cisco specifies StackWise-80 for this C9200L chassis; it does not use the modular family’s StackWise-160 kit.

Condition: New Factory Sealed

C9200-48P-E combines 48 Gigabit PoE+ access ports with modular uplinks and Network Essentials. It is the modular Catalyst 9200 chassis, not a fixed-uplink C9200L or compact C9200CX model.

Condition: New Factory Sealed

C9200-24T-E identifies a 24-port Gigabit data-only Catalyst 9200 with Network Essentials. It uses a modular uplink slot and supports the StackWise-160 system of the modular C9200 family.

Condition: New Factory Sealed

C9200-24P-E is a 24-port Gigabit PoE+ switch in the modular Catalyst 9200 family, ordered with Network Essentials. Uplink module selection and endpoint power requirements must be specified with the chassis.

Condition: New Factory Sealed

C9200-48T-A supplies 48 Gigabit data-only access ports and the Network Advantage software tier. Its uplink connection is determined by a selected network module, not by a fixed 48-port uplink block.

Condition: New Factory Sealed

The C9200-24T-A is a 24-port Gigabit data switch with Network Advantage and modular uplinks. It has no PoE+ access-port power capability and uses the modular Catalyst 9200 hardware platform.

Condition: New Factory Sealed

C9200-48T-E is a 48-port Gigabit data-only Catalyst 9200 chassis with Network Essentials and modular uplinks. It is not a PoE endpoint power source; choose the uplink module to suit the installation.

Condition: New Factory Sealed

Cisco C9200-24P-A is a 24-port Gigabit PoE+ Catalyst 9200 with Network Advantage and a modular uplink design. The chassis order does not by itself establish which network module or transceivers will be delivered.

Condition: New Factory Sealed

C9200L-24P-4X-E provides 24 Gigabit PoE+ access ports, four fixed 1/10G uplinks and Network Essentials. This fixed-uplink Catalyst 9200L uses StackWise-80, not the StackWise-160 system of modular C9200 switches.

Condition: New Factory Sealed

C9200L-48P-4G-E is the 48-port Gigabit PoE+ Catalyst 9200L with four fixed 1G uplinks and Network Essentials. Its standalone performance is 104 Gbps switching capacity and 77.38 Mpps forwarding, not twice that packet rate.

Condition: New Factory Sealed

The C9200L-48P-4X-E combines 48 Gigabit PoE+ access ports with four fixed 1/10G SFP+ uplinks and Network Essentials. Cisco specifies 176 Gbps switching capacity and 130.95 Mpps forwarding for this hardware configuration without stacking.

Condition: New Factory Sealed

C9200L-48PL-4G-E identifies a Catalyst 9200L with 48 Gigabit access ports, partial PoE+ and four fixed 1G SFP uplinks. The E order carries Network Essentials. It is not the C9300L-48P-4X-A model previously named on this page.

Condition: Condition, accessories and support confirmed per order

CSE-200+ is a Barco ClickShare content-sharing system with HDMI input for wired sources and HDMI output for the room display. Two participants can present at once. Its presentation role is different from a wireless network controller.

Condition: Condition and supplied set confirmed by quotation

Barco CSE-800 is a ClickShare presentation system for shared meeting-room displays. It has two HDMI inputs and two HDMI outputs, with up to four shared sources per screen or eight across two screens. It is not a campus WLAN controller.

Condition: New Factory Sealed

ClickShare CSE-200 is a legacy meeting-room presentation base unit, not a campus wireless access point. Its specification separates 16 simultaneous connections from two sources displayed at once. Barco marks the model End of Life and identifies C-10 as its replacement.

Condition: New Factory Sealed

The 86-inch ClickShare X-Display Plus is an integrated meeting display with a CX-M presentation module, camera and room audio. Barco identifies regional article R9861686ZH; availability is limited to mainland China, Hong Kong and Macau. It is not wireless networking infrastructure.

Condition: New Factory Sealed

ClickShare C-10 is Barco wireless presentation equipment for meeting rooms. It supports two sources on screen and interactive presentation features; it is not campus WLAN infrastructure. Confirm the generation and one- or two-Button package before ordering.