AP6050DN Huawei AP6000 802.11ac Wave 2 4x4 MIMU Access Point

Technical specifications

Dimensions (H x W x D)

56 mm x 220 mm x 220 mm

Weight

1.3 kg

System memory

512 MB DDR3L

FLASH

16 MB NOR FLASH + 128 MB NAND FLASH

Power specifications

Power input

• DC: 12 V ± 10%
• PoE power supply: in compliance with IEEE 802.3at

Maximum power consumption

22.9 W (excluding the output power of the USB port)

NOTE:

The actual maximum power consumption depends on local laws and regulations.

Environment specifications

Operating temperature

• -60 m to +1800 m: -10°C to +50°C

• 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m.

Storage temperature

-40°C to +70°C

Operating humidity

5% to 95% (non-condensing)

IP rating

IP41

Atmospheric pressure

53 kPa to 106 kPa

Antenna type

Built-in omnidirectional dual-band antenna

Antenna gain

• 2.4 GHz: 4 dBi
• 5 GHz: 4 dBi

NOTE:

After antenna optimization on the AP6050DN, the 2.4 GHz and 5 GHz antenna gains become 4 dBi and 4 dBi (from 6 dBi and 6 dBi), respectively, improving the overall performance of the AP6050DN.

Maximum number of users

Fit AP: ≤ 512

Fat AP: ≤ 512

Cloud AP: ≤ 512

NOTE:

The actual number of users varies according to the environment.

Maximum number of VAPs for each radio

16

Maximum transmit power

• 2.4 GHz: 26 dBm (combined power)
• 5 GHz: 26 dBm (combined power)

NOTE:

The actual transmit power depends on local laws and regulations.

Maximum number of non-overlapping channels

2.4 GHz (2.412 GHz to 2.472 GHz)

• 802.11b/g
  • 20 MHz: 3
• 802.11n
  • 20 MHz: 3
  • 40 MHz: 1

5 GHz (5.18 GHz to 5.825 GHz)

• 802.11a
  • 20 MHz: 13
• 802.11n
  • 20 MHz: 13
  • 40 MHz: 6
• 802.11ac
  • 20 MHz: 13
  • 40 MHz: 6
  • 80 MHz: 3
  • 160 MHz: 1

NOTE:

The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance.

NOTICE:

• If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage:

  1. The country code of the AP is fixed.
  2. High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency.
• If the AP is delivered to Europe, pay attention to the following on channel and frequency band usage:
  1. The AP cannot work at frequencies in the range of 5725 MHz to 5850 MHz.

Channel rate supported

• 802.11b: 1, 2, 5.5, and 11 Mbit/s
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
• 802.11n: 6.5 to 800 Mbit/s
• 802.11ac Wave 2: 6.5 to 1733.3 Mbit/s