AP4030DN-E Huawei AP4000 Dual-band 802.11ac Access Point
AP4030DN-E
Price:US $407.00
AP4030DN-E Huawei AP4000 Dual-band 802.11ac Access Point product image

AP4030DN-E Huawei AP4000 Dual-band 802.11ac Access Point

AP4030DN-E

Huawei AP4030DN-E is an indoor Wi-Fi 5 AP with 2x2 MIMO at 2.4 GHz, 3x3 at 5 GHz and two Gigabit ports. GE0 accepts PoE; 12 V DC has priority. Verify standalone versus adapter bundle.

New Factory Sealed
US$ 407.00
mastercard paypal t-t visa
AP4030DN-E Huawei AP4000 Dual-band 802.11ac Access Point
Technical Support Enquiries
Confirm scope and response arrangements
  • 763 412 7282
  • +86 010 69614620

AP4030DN-E Overview

Check the E mainframe before choosing a replacement

Huawei AP4030DN-E is an indoor AP4000 wireless access point. Huawei lists the standalone mainframe as 50082800 without an AC/DC power adapter; AP4030DN-E-DC, code 50082770, is a separate adapter-inclusive configuration. Confirm the delivered order code and power accessories in the quotation rather than treating these two configurations as identical.

Read the MIMO values by radio band

The exact hardware record gives 2x2 MIMO at 2.4 GHz and 3x3 at 5 GHz. Its general antenna row uses the shorter description dual-band 3x3 MIMO, but the explicit per-band values are more specific and should guide a replacement comparison. The radios use built-in antennas; the listed gain is 4 dBi at 2.4 GHz and 5 dBi at 5 GHz. Supported standards are 802.11b/g/n and 802.11a/n/ac; this is an 802.11ac-generation product, not a Wi-Fi 6 model.

Separate network, console and power connections

Two RJ-45 Ethernet interfaces negotiate 10/100/1000 Mbit/s. The additional RJ-45 console is a maintenance interface, not a third Ethernet uplink. Only GE0 accepts 802.3af/at PoE. The alternative DC input is 12 V +/-10% through a 2.1 mm jack; the record also gives a 16 V maximum, which is a limit rather than a recommended adapter voltage. When both inputs are present, 12 V DC has priority. Do not substitute the no-priority behavior documented for later AP6000 models.

Plan for an indoor enclosure and the existing WLAN

Huawei records 11.5 W consumption, a 220 x 220 x 53 mm enclosure and 0.8 kg device weight; the separate 1.7 kg figure is packaged weight. IP41 and an operating range of -10 to 50 degrees Celsius describe its installation limits. Above 1800 m and up to 5000 m, reduce the upper temperature limit by 1 degree per 300 m. Before procurement, verify controller and software compatibility, the mounting arrangement, GE0 power availability and whether the required adapter is included; hardware identity alone does not establish those project-specific items.

Huawei exact-model hardware specifications | Huawei exact-model hardware specifications

AP4030DN-E Specification

Verified model specifications

ItemFact and boundary
Standalone order codeAP4030DN-E / 50082800; adapter excluded in manufacturer ordering row
Separate bundleAP4030DN-E-DC / 50082770 includes AC/DC adapter
Per-band MIMO2.4 GHz: 2x2; 5 GHz: 3x3
Antenna gainBuilt-in; 4 dBi at 2.4 GHz and 5 dBi at 5 GHz
Wireless standards802.11b/g/n; 802.11a/n/ac
Network ports2 x 10/100/1000M RJ-45
Console1 x RJ-45 management console
PoE input802.3af/at on GE0 only
DC input12 V +/-10%, 2.1 mm jack; 16 V maximum limit
Input priority12 V DC takes priority when DC and PoE are both connected
Consumption11.5 W
Device size and mass220 x 220 x 53 mm; 0.8 kg device, 1.7 kg packaged
EnvironmentIP41; -10 to 50 C; upper temperature derates above 1800 m

Huawei exact-model hardware specifications | Huawei exact-model hardware specifications

AP4030DN-E Warranty

Quotation information

Product Quotation
Confirm the exact configuration, quantity and quoted price before ordering

Product quality assurance

Condition and Packaging
Confirm the supplied condition, packaging and product identification in the quotation

Return support

Return Eligibility
Contact our customer service team to confirm return eligibility and the terms applicable to your order

Refund policy

Returns and Replacement
Request return or replacement instructions before sending equipment; approval depends on the applicable order terms

Global shipping services

Shipping Arrangements
Confirm the carrier, shipping charges, destination restrictions and estimated dispatch date in the quotation

Warranty policy

Warranty Terms
Confirm the warranty provider, duration, coverage and exclusions for the exact supplied item; no brand-wide warranty is implied

AP4030DN-E FAQ

What is AP4030DN-E?

AP4030DN-E Huawei AP4000 Dual-band 802.11ac Access Point is a HUAWEI AP4000 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.

What per-band mimo is listed for AP4030DN-E?

For AP4030DN-E, the manufacturer specification lists per-band mimo as 2.4 GHz: 2x2; 5 GHz: 3x3.

What antenna gain is listed for AP4030DN-E?

For AP4030DN-E, the manufacturer specification lists antenna gain as Built-in; 4 dBi at 2.4 GHz and 5 dBi at 5 GHz.

What wireless standards is listed for AP4030DN-E?

For AP4030DN-E, the manufacturer specification lists wireless standards as 802.11b/g/n; 802.11a/n/ac.

Is AP4030DN-E available from YYST Global?

Contact YYST Global to confirm availability for AP4030DN-E, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.

Related products

Related AP4030DN-E

View More
AP4030DN Huawei AP4000 Series 802.11ac Wave 1 2x2 MIMO Access Point
AP4030DN

AP4030DN Huawei AP4000 Series 802.11ac Wave 1 2x2 MIMO Access Point

AP4030DN PoE port surge protection: PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 2/4 kV (1.2/50 us, 42 ohm), B/R criterion; Operating temperature: Operating temperature: 0~45℃ (Declare: -10 to +50℃) Storage temperature: -40~70℃; Humidity: 5%~95%.

HUAWEI Huawei AP4000 Series Access Points
AP4030DN-DC - Huawei Indoor Access Points
AP4030DN-DC

AP4030DN-DC - Huawei Indoor Access Points

AP4030DN-DC is an exact Huawei WLAN access-point hardware record. Verify its operating mode, software, wired topology, power and mounting components against Huawei documentation and the received unit.

HUAWEI Huawei AirEngine 5700 Series Access Points
AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points
AP4030TN

AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points

AP4030TN PoE port surge protection: PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion; Operating temperature: Operating temperature: -10~45℃ Storage temperature: -40~70℃; Humidity: 5%~95%.

HUAWEI Huawei AP4000 Series Access Points
AP4050DN-HD
AP4050DN-HD

AP4050DN-HD

Huawei AP4050DN-HD is an indoor 802.11ac Wave 2 access point with 2 × 2 MIMO and two spatial streams. Its built-in dual-band directional antenna has a 30-degree beamwidth, with reference gains of 13 dBi at 2.4 GHz and 10 dBi at 5 GHz. Two Gigabit Ethernet ports have distinct roles: GE0 accepts PoE input and GE1 provides PoE output to downstream devices. Check the powering mode, antenna orientation and intended high-density coverage area in the design.

HUAWEI Huawei AP4000 Series Access Points
AP4050DN Huawei AP4000 Series Indoor 2X2 Dual Band Access Points
AP4050DN

AP4050DN Huawei AP4000 Series Indoor 2X2 Dual Band Access Points

AP4050DN has the following distinguishing entries in the manufacturer specification. Radio port/built-in antenna: Built-in omnidirectional antenna, dual-band, 2x2 MIMO. Radio power (Max): two.4G: 23dBm(Max) 5G: 23dBm(Max) (note: this is MIMO total radio power, the same as: two.4G: 20dBm/chain(Max) 5G : 20dBm/chain(Max)). Ethernet ports: GE(RJ45) x one, 1000base-T, 10M/100M/1000M auto negotiation speed;. Power consumption of the device: twelve.1W. MIMO: 2x2Multi-input Multi-output, for example, four*four:four indicates that 4SU-4MU is supported..

HUAWEI Huawei AP4000 Series Access Points
AP4050DE-M Huawei AP4000 Series 802.11ac Wave 2 Indoor Access Point
AP4050DE-M

AP4050DE-M Huawei AP4000 Series 802.11ac Wave 2 Indoor Access Point

AP4050DE-M has the following distinguishing entries in the manufacturer specification. Radio port/built-in antenna: Built-in omnidirectional antenna, dual-band MIMO, two.4G/5G two+5G two. Radio power (Max): two.4G: 27dBm(Max) 5G: 27dBm(Max) (note: this is MIMO total radio power, the same as: two.4G: 24dBm/chain(Max) 5G : 24dBm/chain(Max)). Ethernet ports: GE(RJ45)*one, 10M/100M/1000M auto. Power consumption of the device: sixteen.40W. MIMO: two.4G:2x25G:2x2Multi-input Multi-output, for example, four*four:four indicates that 4SU-4MU is supported..

HUAWEI Huawei AP4000 Series Access Points
AP4050DN-S Huawei AP4000 Series Dual-band 802.11ac Wave 2 Access Point
AP4050DN-S

AP4050DN-S Huawei AP4000 Series Dual-band 802.11ac Wave 2 Access Point

AP4050DN-S PoE port surge protection: PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion; Operating temperature: Operating temperature: -10~50℃ Storage temperature: -40~70℃; Humidity: 5%~95%.

HUAWEI Huawei AP4000 Series Access Points
AP4051TN AP4050DN-HD Huawei AP4000 802.11ac Wave 2 Triple-Radio AP
AP4051TN

AP4051TN AP4050DN-HD Huawei AP4000 802.11ac Wave 2 Triple-Radio AP

AP4051TN HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.

HUAWEI Huawei AP4000 Series Access Points