AP6750-10T Huawei AP6000 Series Indoor 802.11ac Wave 2 Triple-radio AP

Three radios with different stream counts

Huawei AP6750-10T, mainframe code 02352NAM, is an indoor AP6000 access point using 802.11ac Wave 2. It combines a 2.4 GHz 2x2 radio, a 5 GHz 2x2 radio and another 5 GHz 4x4 radio with built-in smart antennas. The radios therefore have unequal stream counts. A three-radio label should not be read as three identical 4x4 radios or as support for the 6 GHz band.

Gigabit network interfaces and USB expansion

Both RJ-45 network ports negotiate 10/100/1000 Mbit/s. The model does not acquire a multigigabit port merely from its three-radio architecture. Huawei identifies USB 2.0 and describes IoT expansion through USB; this should not be confused with a dedicated internal IoT card slot found on other AP families. Verify the intended USB device and software support separately before specifying an IoT application.

Two power options without hot backup

The AP accepts 802.3at input through only one of its GE ports. Its DC alternative is 12 V +/-10% through a 2.1 mm jack. Huawei states that DC and PoE have no priority distinction and do not support hot backup on this model. Consequently, a dual-connected installation should not be sold as providing the hot-backup behavior of AP6050DN or AP6150DN. The recorded consumption is 19.3 W excluding USB; attached device power must be considered separately.

A shallow indoor enclosure with altitude limits

The AP6750-10T measures 220 x 220 x 47 mm and weighs 1.2 kg. Its IP41 enclosure is intended for indoor conditions. The working range is -10 to 50 degrees Celsius; between 1800 and 5000 m, the upper limit decreases by 1 degree per 300 m. Before replacing another AP6000 model, check mounting fit, controller compatibility, which GE port is powered, and the required USB accessories. Confirm the actual 02352NAM mainframe and included mounting or power items in the quotation.

Huawei exact-model hardware specifications