Brand procurement
JUNIPER Products and Procurement - Page 9
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated JUNIPER Products
Juniper SRX4100-E-P-UPG Enhanced Performance Upgrade License
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.
Juniper S-ACX-400G-A-1 Advanced Subscription Renewal License
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.
Juniper S-ACX-400G-P-1 Premium Software Renewal License
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.
Juniper ACX5448-L-PE FIB and VRF Scale Feature License
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.
Juniper ACX500-LIC-SEC IPsec and NAT Feature Activation License
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.
Juniper ACX500-LIC-GPS Receiver Activation License
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.
Juniper ACX5448-D-FAN-AFI Airflow-In Fan Module
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.
Juniper ACX5448-FAN-AFO Front-to-Back Fan Module
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER Procurement Guide
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Junos and license requirements before ordering.
- Confirm port, optics and airflow compatibility before ordering.
- Confirm power option, TAA requirement and support status before ordering.
How to compare JUNIPER models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
ACX5448-M-DC-AFO is the DC-powered ACX5448-M with front-to-back airflow; its exact suffix fixes AC or DC power and AFI or AFO cooling.Request current pricing
Condition: New Factory Sealed
ACX5448-M-DC-AFI is the DC-powered ACX5448-M with back-to-front airflow; its exact suffix fixes AC or DC power and AFI or AFO cooling.Request current pricing
Condition: New Factory Sealed
ACX5448-M-AC-AFO is the AC-powered ACX5448-M with airflow-out, front-to-back cooling; its exact suffix fixes AC or DC power and AFI or AFO cooling.Request current pricing
Condition: New Factory Sealed
ACX5448-M-AC-AFI is the AC-powered ACX5448-M with airflow-in, back-to-front cooling; its exact suffix fixes AC or DC power and AFI or AFO cooling.Request current pricing
Condition: New Factory Sealed
EX2300-24T is a Juniper fixed Ethernet access switch with 24 non-PoE Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.US$ 1,800.00
Condition: New Factory Sealed
EX2300-24P is a Juniper fixed Ethernet access switch with 24 PoE/PoE+ Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.US$ 168,800.00
Condition: New Factory Sealed
EX-SFP-GE80KCW1490 is a Juniper Gigabit Ethernet CWDM SFP using a 1490nm channel and duplex LC single-mode fiber for links up to 80km.Request current pricing
Condition: New Factory Sealed
EX-SFP-GE10KT14R13 is a Juniper 1000BASE-BX SFP transmitting at 1490nm and receiving at 1310nm over one single-mode fiber for up to 10km.Request current pricing
Condition: New Factory Sealed
EX-SFP-GE10KT13R14 is a Juniper 1000BASE-BX SFP transmitting at 1310nm and receiving at 1490nm over one single-mode fiber for up to 10km.Request current pricing
Condition: New Factory Sealed
EX-SFP-FE20KT13R15 is a Juniper 100BASE-BX Fast Ethernet SFP using Tx 1310nm and Rx 1550nm over one single-mode fiber for links up to 20km.Request current pricing
Condition: New Factory Sealed
EX-SFP-1FE-FX is a Juniper 100BASE-FX SFP with an LC connector, 1310nm wavelength and 2km reach on multimode fiber.Request current pricing
Condition: New Factory Sealed
EX-SFP-10GE-USR is a Juniper 10GbE SFP+ optical transceiver using 850nm multimode fiber, with published reach of 10m on OM1, 20m on OM2 and 100m on OM3.Request current pricing
Condition: New Factory Sealed
Juniper EX-SFP-10GE-SR (part 740-021308) is an 850nm 10GBASE-SR SFP+ optical transceiver with duplex LC and DOM; Juniper lists up to 300m on OM3 and up to 400m on OM4 multimode fiber.US$ 190.00
Condition: New Factory Sealed
Juniper EX-SFP-10GE-LRM (part 740-021310) is a 10GBASE-LRM SFP+ optical transceiver with a 1310nm duplex LC interface, DOM, up to 300m reach on supported single-mode fiber and up to 220m on supported multimode fiber.US$ 200.00
Condition: New Factory Sealed
ACX4000-AC is the redundant-AC ACX4000 order: 2 x 10GbE SFP+, 8 x GbE combination ports including two powered RJ45 ports, 2 x GbE SFP, two MIC slots, hardened operation and Junos OS.US$ 3,982.00
Condition: New Factory Sealed
ACX4000-DC is the redundant-DC ACX4000 order: 2 x 10GbE SFP+, 8 x GbE combination ports including two powered RJ45 ports, 2 x GbE SFP, two MIC slots, hardened operation and Junos OS.US$ 3,982.00
Condition: New Factory Sealed
SRX4100-SYS-JB-DC is the Juniper SRX4100 DC-powered hardware system bundled with Junos Base software.US$ 13,350.00
Condition: New Factory Sealed
ACX2200-AC is the AC-powered, fanless ACX2200 with flexible Gigabit Ethernet interfaces and two 10GbE SFP+ uplinks for packet-based metro access.US$ 3,781.00
Condition: New Factory Sealed
ACX2200-DC is the DC-powered, fanless ACX2200 with flexible Gigabit Ethernet access and two 10GbE SFP+ uplinks for hardened packet access sites.US$ 3,781.00
Condition: New Factory Sealed
ACX2100-AC is the AC-powered ACX2100 with 16 T1/E1 interfaces, flexible Gigabit Ethernet access and two 10GbE SFP+ uplinks.US$ 4,825.00
- 1
- 7
- 8
- 9
- 10
- 11
- 23