Brand procurement
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Recently updated

SRX1500-SYS-JB-AC is a Juniper security services gateway with AC power and Junos Base software. It is a complete system, not a switch module; the documented configuration has sixteen Gigabit Ethernet and four 10 Gigabit Ethernet interfaces.

ACX7300-RE is a routing-engine module for the ACX7300 platform, with an Intel x86 processor, 64GB DDR4 RAM and 100GB SSD. It is not a complete router or a traffic-facing line card.

CHAS-MP-PTX3000-S is the PTX3000 spare chassis identified in Juniper’s hardware-component table. It houses the router assemblies; this chassis order alone does not specify an operational router configuration or forwarding capacity.

EX3400-24T-TAA is Juniper’s TAA-designated 24-port copper Ethernet switch with four 1/10GbE SFP/SFP+ uplinks and two 40GbE QSFP+ ports. The ordering row specifies front-to-back airflow and one JPSU-150-AC-AFO power supply; optics are separate.

ACX500-DC is the DC-powered ACX500 router, using passive cooling and weighing up to 3.9 kg. Juniper lists 65 W device power plus an 80 W PoE allowance for this configuration.

EX2300-C-CBL-GRD is the optional cable guard for Juniper EX2300-C switches. Its front slots route connected cables to help prevent accidental unplugging; this order is a physical accessory, not a switch or a software subscription.

SRX4100-SYS-JE-DC is the two-DC-supply SRX4100 system with Junos Software Enhanced, eight 10GbE interfaces and four fan trays. It is a security gateway, not a campus switch.

SRX4100-SYS-JE-AC combines SRX4100 security-gateway hardware with Junos Software Enhanced. The original package specifies eight 10GbE interfaces, two AC supplies, four fan trays, cables and a rack kit.
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
ACX5448-M-AC-AFO is the AC-powered ACX5448-M with airflow-out, front-to-back cooling; its exact suffix fixes AC or DC power and AFI or AFO cooling.US$ 13,562.00
Condition: New Factory Sealed
ACX5448-M-AC-AFI is the AC-powered ACX5448-M with airflow-in, back-to-front cooling; its exact suffix fixes AC or DC power and AFI or AFO cooling.US$ 13,562.00
Condition: New Factory Sealed
EX2300-24T is a Juniper fixed Ethernet access switch with 24 non-PoE Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.US$ 1,800.00
Condition: New Factory Sealed
EX2300-24P is a Juniper fixed Ethernet access switch with 24 PoE/PoE+ Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.US$ 168,800.00
Condition: New Factory Sealed
EX-SFP-GE80KCW1490 is a Juniper Gigabit Ethernet CWDM SFP using a 1490nm channel and duplex LC single-mode fiber for links up to 80km.US$ 100.00
Condition: New Factory Sealed
EX-SFP-GE10KT14R13 is a Juniper 1000BASE-BX SFP transmitting at 1490nm and receiving at 1310nm over one single-mode fiber for up to 10km.US$ 100.00
Condition: New Factory Sealed
EX-SFP-GE10KT13R14 is a Juniper 1000BASE-BX SFP transmitting at 1310nm and receiving at 1490nm over one single-mode fiber for up to 10km.US$ 100.00
Condition: New Factory Sealed
EX-SFP-FE20KT13R15 is a Juniper 100BASE-BX Fast Ethernet SFP using Tx 1310nm and Rx 1550nm over one single-mode fiber for links up to 20km.US$ 100.00
Condition: New Factory Sealed
EX-SFP-1FE-FX is a Juniper 100BASE-FX SFP with an LC connector, 1310nm wavelength and 2km reach on multimode fiber.US$ 100.00
Condition: New Factory Sealed
EX-SFP-10GE-USR is a Juniper 10GbE SFP+ optical transceiver using 850nm multimode fiber, with published reach of 10m on OM1, 20m on OM2 and 100m on OM3.US$ 100.00
Condition: New Factory Sealed
Juniper EX-SFP-10GE-SR (part 740-021308) is an 850nm 10GBASE-SR SFP+ optical transceiver with duplex LC and DOM; Juniper lists up to 300m on OM3 and up to 400m on OM4 multimode fiber.US$ 190.00
Condition: New Factory Sealed
Juniper EX-SFP-10GE-LRM (part 740-021310) is a 10GBASE-LRM SFP+ optical transceiver with a 1310nm duplex LC interface, DOM, up to 300m reach on supported single-mode fiber and up to 220m on supported multimode fiber.US$ 200.00
Condition: New Factory Sealed
ACX4000-AC is the redundant-AC ACX4000 order: 2 x 10GbE SFP+, 8 x GbE combination ports including two powered RJ45 ports, 2 x GbE SFP, two MIC slots, hardened operation and Junos OS.US$ 3,982.00
Condition: New Factory Sealed
ACX4000-DC is the redundant-DC ACX4000 order: 2 x 10GbE SFP+, 8 x GbE combination ports including two powered RJ45 ports, 2 x GbE SFP, two MIC slots, hardened operation and Junos OS.US$ 3,982.00
Condition: New Factory Sealed
SRX4100-SYS-JB-DC is the Juniper SRX4100 DC-powered hardware system bundled with Junos Base software.US$ 13,350.00
Condition: New Factory Sealed
ACX2200-AC is the AC-powered, fanless ACX2200 with flexible Gigabit Ethernet interfaces and two 10GbE SFP+ uplinks for packet-based metro access.US$ 3,781.00
Condition: New Factory Sealed
ACX2200-DC is the DC-powered, fanless ACX2200 with flexible Gigabit Ethernet access and two 10GbE SFP+ uplinks for hardened packet access sites.US$ 3,781.00
Condition: New Factory Sealed
ACX2100-AC is the AC-powered ACX2100 with 16 T1/E1 interfaces, flexible Gigabit Ethernet access and two 10GbE SFP+ uplinks.US$ 4,825.00
Condition: New Factory Sealed
ACX2100-DC is the DC-powered ACX2100 with 16 T1/E1 interfaces, Gigabit Ethernet access ports and two 10GbE SFP+ uplinks for legacy-service migration and metro access.US$ 4,825.00
Condition: New Factory Sealed
EX3400-24T is the 24-port non-PoE EX3400 model with four SFP/SFP+ and two QSFP+ uplinks for compact data-only access deployments.US$ 1,516.00