Enterprise IT Network Hardware Products - Page 6

Condition: New Factory Sealed

Huawei AP2050DN-S is an indoor wall-plate access point with an IEEE 802.11ac Wave 2 wireless module. The exact manufacturer ordering line lists mainframe part number 50083061 with dual-frequency 2×2 radio and a built-in antenna. GE0/PoE_IN supplies the Gigabit Ethernet uplink and PoE input, while GE1–GE4 are Gigabit data ports. The AP also provides USB2.0 storage and an RJ45 network/phone cable pass-through. Power choices are 48 V ±5% DC or IEEE 802.3af/at PoE; the 11.5 W reference excludes USB output power. Huawei states that the power adapter is purchased separately. The image shown is the original manufacturer interface illustration.

Condition: New Factory Sealed

Huawei R240D is an indoor wall-plate remote unit for a central-AP-managed agile distributed Wi-Fi system. Its room-facing ETH0–ETH3 interfaces run at 10/100M, while the GE/PoE uplink supports 10/100/1000M and PoE input. Huawei separately identifies phone connections for a POTS phone or modem and for a traditional PSTN. R240D accepts 12 V ±10% DC or IEEE 802.3af/at PoE, with an 8.7 W consumption reference. The manufacturer restricts this 86-type-box design to countries and regions supporting that box format and documents dual-band IEEE 802.11a/b/g/n/ac operation.

Condition: New Factory Sealed

Huawei R250D-E is a wall-plate remote unit connected to a central AP in Huawei agile distributed Wi-Fi. Its exact hardware chapter separates GE0/PoE_IN from GE1/PoE_OUT, provides GE2–GE4 Gigabit data connections, and lists a 48 V ±5% DC input alongside IEEE 802.3af/at PoE. A USB2.0 storage connection and an RJ45 cable pass-through support the room wiring arrangement. The documented 11.5 W consumption excludes USB and downstream PoE output power. R250D-E uses an 86 mm plate and dual-band IEEE 802.11ac Wave 2; it is not interchangeable with the simpler R250D port layout.

Condition: New Factory Sealed

Huawei R251D is an indoor wall-plate remote unit for Huawei agile distributed Wi-Fi, connected to and managed by a central AP. The base R251D requires IEEE 802.3af PoE input through GE0/PoE_IN and provides four GE1–GE4 Ethernet data ports plus RJ45 pass-through ports for transparent network or phone cabling. Huawei lists 11.5 W unit consumption, a 32.5 × 86 × 150 mm housing and 0.25 kg weight. The shared characteristics specify IEEE 802.11ac Wave 2 on 2.4 GHz and 5 GHz, smart antennas and installation in 86 mm, 120 mm or 118 mm junction boxes.

Condition: New Factory Sealed

Huawei R251D-E is an indoor wall-plate remote unit for agile distributed Wi-Fi, connected to and managed by a central AP. The E model requires IEEE 802.3at PoE input through GE0/PoE_IN, adds GE4/PoE_Out and a USB2.0 storage interface, and also provides GE1–GE3 Ethernet ports and separate RJ45 pass-through ports. Huawei lists 11.5 W unit consumption excluding the USB and PoE_OUT output power. The shared characteristics describe dual-band IEEE 802.11ac Wave 2, smart antennas and installation in 86 mm, 120 mm or 118 mm junction boxes; verify the exact mounting and central-AP arrangement.

Condition: New Factory Sealed

Huawei R450D is an indoor remote unit (RU) for Huawei agile distributed Wi-Fi, connected to and managed by a central AP. Its wireless module supports IEEE 802.11a/b/g/n/ac/ac Wave 2 on 2.4 GHz and 5 GHz. A GE/PoE_IN 10/100/1000M connection carries the wired uplink and PoE input; a separate console supports maintenance. Huawei lists DC 12 V or IEEE 802.3af/at input, 12.1 W maximum consumption, a 35 × 170 × 170 mm housing and 0.41 kg reference weight. Confirm the central AP, software and power arrangement when requesting a quote.

Condition: New Factory Sealed

Huawei AP4050DE-B-S is an indoor 802.11ac Wave 2 access point with 2×2 MU-MIMO, two spatial streams, concurrent 2.4 GHz/5 GHz service and built-in smart antennas. Built-in Bluetooth supports positioning with eSight. The exact B-S hardware chapter lists 14.05 W maximum consumption and 23 dBm combined transmit references on each band, with regional conditions; these differ from the AP4050DE-M chapter’s 16.40 W and 27 dBm references. It supports Fat, Fit and cloud modes and DC 12 V or IEEE 802.3af/at PoE input. The manufacturer image is a Series family appearance reference; verify the supplied model label.

Condition: New Factory Sealed

Huawei AP3050DE, mainframe code 02352CXM, is an indoor 802.11ac Wave 2 access point with concurrent 2.4 GHz and 5 GHz 2×2 MIMO, two spatial streams and built-in smart antennas. It has one RJ45 Gigabit Ethernet connection and supports Fat, Fit and cloud operation. Huawei lists 11.48 W consumption and DC 12 V or IEEE 802.3af/at PoE input. Its exact hardware record explicitly does not support DC/PoE hot backup and requires DC 12 V ±5% when both inputs are connected. The manufacturer illustration is a family appearance reference; verify the exact model label and supplied accessories.

Condition: New Factory Sealed

Huawei AP5050DN-S is an indoor 802.11ac Wave 2 access point with simultaneous 2.4 GHz 3×3 and 5 GHz 4×4 operation. Its two Gigabit Ethernet interfaces support the documented link-aggregation and traffic-load-balancing features; GE0/PoE accepts PoE input and GE1 is the second data port. Power input is 12 V DC or IEEE 802.3at, with a 19.7 W AP consumption reference excluding USB output. It has USB2.0 storage expansion and supports Fat, Fit and cloud management modes.

Condition: New Factory Sealed

Huawei AP3010DN-V2 is an indoor dual-band 2×2 MIMO WLAN access point. The exact Huawei mainframe order record is 50083631 and explicitly excludes the AC/DC power adapter; AP3010DN-V2-DC 50082759 and AP3010DN-V2-FAT-DC 50082760 are separate adapter-inclusive configurations. The hardware detail lists one Gigabit Ethernet connection, 12 V DC or IEEE 802.3af/at PoE, and PoE priority when both power inputs are present. Its detailed wireless-standard fields include 802.11b/g/n and 802.11a/n/ac.

Condition: New Factory Sealed

Huawei AP5030DN is an indoor 802.11ac access point with 3×3 MIMO, simultaneous 2.4 GHz/5 GHz service and built-in omnidirectional antennas. It provides a GE0/PoE input and a separate GE1 Gigabit Ethernet data port. The exact model supports a Fit AP plus bridge hybrid arrangement. Huawei lists DC 12 V or IEEE 802.3af/at and a 12.95 W maximum consumption reference, qualified by local rules. Fit and Fat user references are 256 and 64; the 2.4 GHz radio does not support 40 MHz in FCC regions.

Condition: New Factory Sealed

Huawei AP5130DN is an indoor 802.11ac access point with 3×3 MIMO, simultaneous 2.4 GHz/5 GHz service and external dual-band antennas using RP-SMA-K connections. It provides GE0/PoE and GE1 Gigabit Ethernet ports; only GE0/PoE is identified as accepting PoE input. Huawei lists 12 V DC or IEEE 802.3af/at power and a 12.95 W maximum consumption reference. Fit and Fat user references differ: up to 256 and 64 respectively. In FCC regions, the 2.4 GHz radio does not support 40 MHz bandwidth.

Condition: New Factory Sealed

Huawei AP4051DN is an indoor 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and simultaneous 2.4 GHz/5 GHz service. Both GE0/PoE_IN and GE1/PoE_IN are Gigabit Ethernet inputs supporting PoE; Huawei describes dual-port power backup. Its USB2.0 interface supports storage expansion. The exact hardware table lists 12 V DC or IEEE 802.3af/at input and a 12.3 W consumption reference excluding USB output, with actual maximum subject to regional rules.

Condition: New Factory Sealed

Huawei AP4130DN is an indoor IEEE 802.11ac access point with simultaneous 2.4 GHz and 5 GHz service, 2×2 MIMO and external dual-band antennas. Its 2.4G/5G antenna connection is RP-SMA-K and carries both bands. The single GE/PoE Ethernet port accepts PoE input; 12 V DC is the alternative input. Huawei lists a 10.2 W maximum consumption reference and different user references for Fit and Fat modes: 256 and 64. A Fit AP plus bridge hybrid mode is described in the exact characteristics.

Condition: New Factory Sealed

Huawei AP4050DE-M is an indoor 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and simultaneous 2.4 GHz/5 GHz service. Its built-in smart antenna array targets signal coverage as terminals move; built-in Bluetooth supports positioning with eSight. The AP supports Fat, Fit and cloud management modes. Its hardware reference is 47 × 200 × 200 mm, 0.7 kg and IP41, with 12 V DC or IEEE 802.3at/af power input and a region-qualified maximum consumption of 16.40 W.

Condition: New Factory Sealed

Huawei AP4030DN is an indoor dual-band IEEE 802.11ac access point with 2×2 MIMO. It serves 2.4 GHz and 5 GHz clients simultaneously and supports a Fit AP plus bridge hybrid arrangement. A single GE/PoE port connects the wired Ethernet and accepts PoE input; a separate console supports maintenance. The exact hardware chapter lists 12 V DC or IEEE 802.3af/at PoE and a region-qualified maximum power reference of 10.2 W. Fit and Fat user references differ: up to 256 and 64 respectively.

Condition: New Factory Sealed

Huawei AP4030TN is an indoor IEEE 802.11ac access point with 2×2 MIMO and three flexible radios. One radio is 5 GHz-only; the other two support 2.4 GHz and 5 GHz. Huawei describes 2.4G plus dual-5G access and a Fit AP plus bridge hybrid mode. GE0/PoE and GE1 provide Gigabit Ethernet connections, and USB can extend storage while supplying up to 2.5 W. Power input is 12 V DC or IEEE 802.3at PoE; the 21.5 W hardware consumption reference excludes USB output.

Condition: New Factory Sealed

Huawei AP4050DN-S is an indoor dual-band 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and MU-MIMO. Its built-in omnidirectional dual-band antenna serves 2.4 GHz and 5 GHz simultaneously. One Gigabit GE/PoE_IN connection handles the wired uplink and PoE input; a separate console port supports maintenance. The hardware supports 12 V DC or IEEE 802.3af/at PoE, with 12.1 W region-qualified maximum consumption. Confirm the power source, management mode and supplied accessories in the quote.

Condition: New Factory Sealed

Huawei AP9132DN is a railway access point with simultaneous 2.4 GHz and 5 GHz service, IEEE 802.11ac and 3×3 MIMO. Its wired connections include a Gigabit M12 electrical interface and a separate optical interface, with external QMA antenna connections. Huawei documents distinct trackside backhaul, vehicle-mounted backhaul and compartment coverage roles. Power comes from 48 V DC within a 33.6–60 V range or IEEE 802.3at PoE; specify the role, antenna arrangement and management mode in the quotation.

Condition: New Factory Sealed

Huawei AP8050TN-HD is an outdoor 802.11ac Wave 2 access point designed for high-density sites such as stadiums and outdoor courts. It has three radios: one at 2.4 GHz and two at 5 GHz, each using 2×2 MIMO with two spatial streams. Built-in directional antennas provide 40° horizontal/vertical beamwidth at 2.4 GHz and 27° at 5 GHz. Two Gigabit Ethernet connections and an optical SFP port support wired integration; specify the PoE mode, country version and mounting scope in the quotation.