Enterprise IT Network Hardware Products - Page 5

Condition: New Factory Sealed

ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.

Condition: New Factory Sealed

ACX5448-FAN-AFI is a Juniper airflow-in fan module for the ACX5448 platform, not a complete router. AFI directs air from the rear fan side toward the front ports. Juniper identifies this order with AIR IN and blue markings; its airflow must match the installed power modules. The official Series fan-module drawing is a reference, not a photograph of the supplied AFI unit.

Condition: New Factory Sealed

ACX7509-FPC-4CD is a Juniper line card for the ACX7509 chassis with four QSFP56-DD ports, not a complete router. The exact interface guide permits this card only in slots 1 and 5: native 400GbE or 4x100GbE using suitable breakout cables, with 400GbE as the default. Confirm the slot and optical configuration before ordering. The official Series illustration retains its JNP-FPC-4CD label and is not the supplied-unit photograph.

Condition: New Factory Sealed

ACX7509-FPC-20Y is a Juniper 20-port line card for the ACX7509 chassis, not a complete router. Its 20 SFP56 ports are covered by the exact interface guide: 1/10/25GbE in slots 0, 2, 3, 4, 6 and 7; 10/25GbE in slots 1 and 5. That guide does not support channelization for this card. The official Series diagram is labelled JNP-FPC-20Y, not a photograph of the supplied unit.

Condition: New Factory Sealed

ACX7509-FPC-16C is a Juniper line card for the ACX7509 chassis, not a complete router. It has 16 QSFP28 ports for 40/100GbE, but usable ports depend on the chassis slot: all sixteen in slots 1 and 5, selected ports elsewhere, and seven listed ports in slot 7. Verify the slot, optics and breakout configuration. The official Series diagram is labelled JNP-FPC-16C; it is not a photograph of the supplied unit.

Condition: New Factory Sealed

902-2101-0000 is the RUCKUS external antenna module for E510, not a network switch or a complete access point. It is an omnidirectional, dual-polarized, dual-band antenna with BeamFlex+ support and RP-SMA connections; connecting cables are ordered separately. The official Series image shows the separate E510 RF/AP module, not this antenna or the supplied package.

Condition: New Factory Sealed

C1-N5K-C5596UP-FA is Cisco’s Cisco ONE Nexus 5596UP switch order: a 2RU chassis described with two power supplies, four fans and 48 fixed 10GE ports. It is a complete switch ordering identity, not a separate fan accessory. Confirm the actual supplied system and software entitlement. The official Series photo shows three optional expansion modules; it is not a photograph or packing list for the offered C1 unit.

Condition: New Factory Sealed

ASR5K-ACCY-LUG= is Cisco’s chassis lug accessory kit for the ASR 5000 platform, not a standalone network switch. Cisco identifies this exact order in amended EOL10509: manufacturer sales ended in January 2016 and hardware support ended in January 2021. Confirm the supplied kit contents and installed chassis before ordering. The official image is a Series chassis grounding reference, not a photograph or bill of materials for the offered kit.

Condition: New Factory Sealed

N3K-C3048-FAN is the Cisco Nexus 3048 fan module for forward airflow, meaning port-side exhaust. This replacement cooling component is not a standalone network switch. The FAN-B intake variant has the opposite airflow and must not be substituted without checking the installed fan and power-supply arrangement. The image is an official host assembly reference, not a supplied fan-unit photograph.

Condition: New Factory Sealed

N3K-C3048-FAN-B is Cisco’s Nexus 3048 fan module with reversed airflow, also described as port-side intake. It is a cooling component, not a standalone network switch. Match its airflow to the installed cooling and power-supply arrangement. Cisco lists this exact PID in EOL14841. The official image is a host assembly reference, not a supplied fan-unit photograph.

Condition: New Factory Sealed

ASR-9001-TRAY is Cisco’s cable-management tray for the ASR 9001 router, not a network switch or a chassis rack-mount kit. The installation guide places the tray at the front-bottom of the chassis to organize interface cables. Cisco names this exact ordering row in EOL14473. The official drawing shows an assembly installation reference, not the supplied unit.

Condition: New Factory Sealed

A99-32X100GE-CM is a fourth-generation Cisco ASR 9900 chassis line card with thirty-two 100GE QSFP28 interfaces. It is a hardware component, not a complete router, a pure software license or the A99-32HG-FC replacement. Cisco lists the CM part in EOL15321; manufacturer end of sale was 15 June 2024, with support subject to contract eligibility. The image is Cisco’s TR-family illustration, not a CM supplied-unit photograph.

Condition: New Factory Sealed

A99-16X100GE-X-FC= is the Cisco ASR 9900 16-port 100GE Flexible Consumption line-card order listed in lifecycle bulletin EOL15321. It is a chassis component, not a complete router. The 16-port family supports QSFP-based interfaces; chassis fabric, route-processor and cooling requirements must be checked. Cisco ended manufacturer sales on 15 June 2024 and new service attachments on 15 June 2025. Existing contract coverage is separate from inventory availability. The image is Cisco’s SE-family illustration, not an FC spare or supplied-unit photo.

Condition: New Factory Sealed

Huawei AP9330DN-DC is the AP9330DN distributed access-point bundle mapped to manufacturer part 02350CFD. Its exact order description includes an AC/DC adapter, indoor dual-frequency 802.11ac hardware and twelve external antenna ports. Huawei separately identifies the adapter-free AP9330DN mainframe as 02350CFC. The AP hardware uses RP-SMA-K connections and supports 12 V ±10% DC or IEEE 802.3at input; its named-model consumption reference is 19 W. Confirm the supplied adapter, destination plug, room antennas and feeder plan. The image illustrates the AP9330DN hardware and does not show or establish the complete offered bundle contents.

Condition: New Factory Sealed

Huawei AP9330DN is an indoor dual-band 802.11ac distributed access point with 12 external antenna connections. Huawei describes coverage for six rooms with two streams per room, subject to the planned antenna and feeder installation. Its antenna ports use RP-SMA-K connectors. The named-model specification lists 12 V ±10% DC or IEEE 802.3at PoE, a 19 W maximum-consumption reference, 53 × 220 × 220 mm dimensions and 1.3 kg weight. Order reference 02350CFC excludes an AC/DC adapter; 02350CFD is the adapter bundle. Confirm the offered order code and accessories in the quote. The image is original manufacturer interface artwork, not a supplied-unit photograph.

Condition: New Factory Sealed

Huawei AP4151DN is an indoor 802.11ac Wave 2 access point with dual-band 2×2 radio and external antennas. Its manufacturer mainframe order reference is 50083117. Two RP-SMA-K connections serve dual-band antennas, and both Gigabit GE/PoE_IN ports support PoE input. Huawei specifies 12 V ±10% DC or IEEE 802.3af/at power; USB is unavailable with 802.3af input. The 12.3 W device-consumption reference excludes USB output power. The nominal hardware-guide enclosure is 35 × 170 × 170 mm and 0.45 kg. The image is the original manufacturer AP4151DN interface illustration, not a supplied-unit photograph.

Condition: New Factory Sealed

Huawei AP5010DN-AGN-DC is the AP5010DN-AGN access-point bundle mapped to part number 02358264 in Huawei’s Hardware Center. Its order description includes an AC/DC adapter, an indoor 802.11n dual-frequency 2×2 AP and a built-in antenna. The mainframe-only 02355547 is a separate order without an adapter. For the AP5010DN-AGN hardware inside the bundle, Huawei documents Gigabit ETH/PoE and console connections, 12 V ±10% DC or IEEE 802.3af/at input, and a 9.5 W maximum-consumption reference. Verify the supplied adapter and regional configuration. The image is a shared manufacturer interface illustration, not a photograph of the offered bundle contents.

Condition: New Factory Sealed

Huawei AP5010DN-AGN is an indoor 802.11n access point. Its manufacturer mainframe order reference is 02355547: dual-frequency 2×2, a built-in antenna and no AC/DC adapter. The hardware illustration for this model group identifies an ETH/PoE Gigabit Ethernet connection and a console port. The basic specification table assigns AP5010DN-AGN a 9.5 W maximum-consumption reference and allows 12 V ±10% DC or IEEE 802.3af/at power. The 02358264 bundle is a separate ordering line with an AC/DC adapter. The displayed image is Huawei’s shared interface illustration for the named AP3010/AP5010/AP6010 models, not a supplied-unit photograph.

Condition: New Factory Sealed

Huawei AP2030DN is an enterprise wall-plate access point with a manufacturer ordering reference of 50082640. That exact row specifies five RJ45 connections, two RJ11 connections and an 802.11ac dual-frequency design. The interface table separates a Gigabit GE/PoE uplink from four 10/100M ETH0–ETH3 room ports and identifies telephone interfaces for PSTN and for a POTS phone or modem. Power options are 12 V ±10% DC and IEEE 802.3af/at PoE, with an 8.7 W consumption reference. The illustrated top, bottom and side views are original manufacturer interface artwork. AP2030DN-S is a different order reference and has a simpler wired layout.

Condition: New Factory Sealed

Huawei AP2030DN-S is an indoor 86-type wall-plate access point. Its exact manufacturer mainframe ordering line is part number 50083605, described as 802.11ac, dual-band 2×2 with a built-in antenna. The hardware guide documents one 10/100M ETH/PoE connection to the central AP, IEEE 802.3af input and a 5.1 W consumption reference. Cabling must be Cat5e or better and no longer than 100 m. The reference enclosure is 26 × 86 × 120 mm and 0.1 kg. The displayed image is a shared manufacturer wall-plate interface illustration supplied in the AP2030DN-S chapter, not a photograph of the offered unit.