AP8050TN-HD
- 763 412 7282
- +86 010 69614620
AP8050TN-HD Overview
Allocate coverage across the three radios
AP8050TN-HD has a 2.4 GHz radio plus two separate 5 GHz radios. Each radio uses 2x2 MIMO and two spatial streams, with 802.11ac Wave 2 and MU-MIMO support. Huawei identifies stadiums and outdoor courts as intended high-density settings. Design the channel assignments and client distribution for that three-radio arrangement; do not substitute the two-radio specification of AP8050DN or assume that adding radios guarantees application capacity.
Aim the integrated directional antennas
The built-in antenna pattern differs between bands: 2.4 GHz has 40-degree horizontal and vertical beamwidths with 7 dBi reference gain; both 5 GHz radios have 27-degree horizontal and vertical beamwidths with 9 dBi reference gain. Confirm mounting direction and the target seating or court area before ordering the installation kit. These are antenna reference values, not a guaranteed coverage radius or a supplied external antenna specification.
Keep the af and at power figures separate
Huawei lists IEEE 802.3at/af PoE input on GE0. The exact hardware table gives maximum consumption of 19.4 W with 802.3at and 12.95 W with 802.3af, subject to local laws and regulations. The figures describe different power modes; the cited tables do not establish that all functions operate identically under af. Agree the intended radio configuration, upstream power allocation and software-specific operating behavior before acceptance. No DC input is documented in these sources.
Specify copper, optics and maintenance access
GE0/PoE and GE1 are 10/100/1000M Ethernet connections; GE0 accepts PoE input. The separate SFP interface supports 100M/1000M optical modules in the hardware chapter. A console connection supports configuration and maintenance, and the device ground screw connects a ground cable. Record the required optical module and its compatible link parameters separately. The reset button is covered by a waterproof screw that must be retained and refitted after access.
Check mounting load and the site envelope
AP8050TN-HD measures 100 × 320 × 320 mm in height, width and depth and weighs 3.23 kg. It is rated IP68 and lists 0–100% non-condensing humidity and wind resistance up to 149 MPH. The operating range is −40°C to +65°C from −60 to 1800 m; above 1800 m and up to 5000 m, the temperature limit decreases by 1°C per 300 m rise. Confirm the mounting structure and installation sealing against the actual site conditions.
Match the order identity and acceptance scope
Huawei InfoFinder identifies AP8050TN-HD under part number 50083481 and classifies the displayed hardware as FIT_AP8050TN-HD. The characteristics chapter separately documents Fat, Fit and cloud modes and built-in Bluetooth; confirm the delivered software and management choice rather than treating that classification as a license entitlement. The radio table lists up to 768 users for those modes and 16 VAPs per radio, with actual users dependent on the environment. Reference combined transmit power is 21 dBm at 2.4 GHz, 20 dBm at 5150–5350 MHz and 21 dBm at 5490–5850 MHz; local limits apply. Validate the planned traffic, channel configuration and delivered parts during acceptance.
Document/Firmware Download
AP8050TN-HD Specification
| Exact model and official part | AP8050TN-HD; Huawei InfoFinder part number 50083481 |
| Radio layout | One 2.4 GHz radio plus two 5 GHz radios |
| MIMO per radio | 2×2 MIMO; two spatial streams on each radio; Wave 2 MU-MIMO |
| 2.4 GHz directional antenna | 40° horizontal and vertical beamwidth; 7 dBi reference gain |
| 5 GHz directional antennas | 27° horizontal and vertical beamwidth; 9 dBi reference gain on both radios |
| Copper ports | GE0/PoE and GE1: 10/100/1000M; PoE input on GE0 |
| Optical interface | Separate SFP interface; 100M/1000M optical module support |
| Power input | IEEE 802.3at/af PoE |
| Consumption by power mode | 802.3at: 19.4 W; 802.3af: 12.95 W; regional conditions apply; feature parity not assumed |
| Reference transmit power | Combined: 2.4 GHz 21 dBm; 5150–5350 MHz 20 dBm; 5490–5850 MHz 21 dBm; local limits apply |
| Dimensions H × W × D | 100 × 320 × 320 mm |
| Reference weight | 3.23 kg |
| Enclosure and wind references | IP68; wind resistance up to 149 MPH |
| Operating temperature and altitude | −40 to +65°C at −60–1800 m; temperature decreases 1°C per 300 m at 1800–5000 m |
| Humidity and storage | 0–100% non-condensing; storage −40 to +85°C |
| User and VAP references | Fat/Fit/cloud ≤768 users, actual environment-dependent; 16 VAPs per radio |
| Management and Bluetooth | Fat, Fit and cloud modes supported; built-in Bluetooth; delivered software to confirm |
| Order and acceptance scope | Verify part code, region, PoE mode, radio plan, optical module, mounting kit and supplied condition |
AP8050TN-HD Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
AP8050TN-HD FAQ
What is AP8050TN-HD?
AP8050TN-HD is a HUAWEI Wireless product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What radio layout is listed for AP8050TN-HD?
For AP8050TN-HD, the manufacturer specification lists radio layout as One 2.4 GHz radio plus two 5 GHz radios.
What mimo per radio is listed for AP8050TN-HD?
For AP8050TN-HD, the manufacturer specification lists mimo per radio as 2×2 MIMO; two spatial streams on each radio; Wave 2 MU-MIMO.
What 2.4 ghz directional antenna is listed for AP8050TN-HD?
For AP8050TN-HD, the manufacturer specification lists 2.4 ghz directional antenna as 40° horizontal and vertical beamwidth; 7 dBi reference gain.
Is AP8050TN-HD available from YYST Global?
Contact YYST Global to confirm availability for AP8050TN-HD, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related AP8050TN-HD
Huawei AP2050DN 802.11ac Wall-Plate Access Point 50082925
AP2050DN is Huawei part 50082925: an 802.11ac wall-plate AP with GE0 PoE input and GE1 data. Series interface illustration. Request a quote.
Huawei AP9330DN-DC Access Point Bundle
Huawei AP9330DN-DC is the AP9330DN distributed access-point bundle mapped to manufacturer part 02350CFD. Its exact order description includes an AC/DC adapter, indoor dual-frequency 802.11ac hardware and twelve external antenna ports. Huawei separately identifies the adapter-free AP9330DN mainframe as 02350CFC. The AP hardware uses RP-SMA-K connections and supports 12 V ±10% DC or IEEE 802.3at input; its named-model consumption reference is 19 W. Confirm the supplied adapter, destination plug, room antennas and feeder plan. The image illustrates the AP9330DN hardware and does not show or establish the complete offered bundle contents.
Huawei AP9330DN Distributed Access Point
Huawei AP9330DN is an indoor dual-band 802.11ac distributed access point with 12 external antenna connections. Huawei describes coverage for six rooms with two streams per room, subject to the planned antenna and feeder installation. Its antenna ports use RP-SMA-K connectors. The named-model specification lists 12 V ±10% DC or IEEE 802.3at PoE, a 19 W maximum-consumption reference, 53 × 220 × 220 mm dimensions and 1.3 kg weight. Order reference 02350CFC excludes an AC/DC adapter; 02350CFD is the adapter bundle. Confirm the offered order code and accessories in the quote. The image is original manufacturer interface artwork, not a supplied-unit photograph.
Huawei AC650-64AP WLAN Access Controller
AC650-64AP is a Huawei WLAN controller, part 02354JKA, with 10 GE ports, 2 SFP+ uplinks and a power adapter. Confirm AP rights and request a quote.
Huawei R450D Remote Unit
Huawei R450D is an indoor remote unit (RU) for Huawei agile distributed Wi-Fi, connected to and managed by a central AP. Its wireless module supports IEEE 802.11a/b/g/n/ac/ac Wave 2 on 2.4 GHz and 5 GHz. A GE/PoE_IN 10/100/1000M connection carries the wired uplink and PoE input; a separate console supports maintenance. Huawei lists DC 12 V or IEEE 802.3af/at input, 12.1 W maximum consumption, a 35 × 170 × 170 mm housing and 0.41 kg reference weight. Confirm the central AP, software and power arrangement when requesting a quote.
Huawei AP7050DE Indoor Access Point
Huawei AP7050DE is an indoor 802.11ac Wave 2 access point with four spatial streams, 4 x 4 MU-MIMO and built-in smart antennas. It has separate Gigabit GE0/PoE and GE1 ports. Confirm the regional mainframe, supply and separately purchased adapter before ordering.
Huawei AP4151DN Indoor Access Point
Huawei AP4151DN is an indoor 802.11ac Wave 2 access point with dual-band 2×2 radio and external antennas. Its manufacturer mainframe order reference is 50083117. Two RP-SMA-K connections serve dual-band antennas, and both Gigabit GE/PoE_IN ports support PoE input. Huawei specifies 12 V ±10% DC or IEEE 802.3af/at power; USB is unavailable with 802.3af input. The 12.3 W device-consumption reference excludes USB output power. The nominal hardware-guide enclosure is 35 × 170 × 170 mm and 0.45 kg. The image is the original manufacturer AP4151DN interface illustration, not a supplied-unit photograph.
Huawei AP5010DN-AGN-DC Access Point Bundle
Huawei AP5010DN-AGN-DC is the AP5010DN-AGN access-point bundle mapped to part number 02358264 in Huawei’s Hardware Center. Its order description includes an AC/DC adapter, an indoor 802.11n dual-frequency 2×2 AP and a built-in antenna. The mainframe-only 02355547 is a separate order without an adapter. For the AP5010DN-AGN hardware inside the bundle, Huawei documents Gigabit ETH/PoE and console connections, 12 V ±10% DC or IEEE 802.3af/at input, and a 9.5 W maximum-consumption reference. Verify the supplied adapter and regional configuration. The image is a shared manufacturer interface illustration, not a photograph of the offered bundle contents.