AP4050DE-M Huawei AP4000 Series 802.11ac Wave 2 Indoor Access Point
- 763 412 7282
- +86 010 69614620
AP4050DE-M Overview
AP4050DE-M Technical Profile
- PoE port surge protection
- PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion
- Operating temperature
- Operating temperature: -10~50℃ Storage temperature: -40~70℃
- Humidity
- 5%~95%
- Certification of Radio Association of China
- CMIIT ID;
- MIMO
- 2.4G:2x25G:2x2Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported.
- Antenna gain (Typical)
- 2.4G:3dBi 5G:3dBi
- Radio port/built-in antenna
- Built-in omnidirectional antenna, dual-band MIMO, 2.4G/5G 2 2+5G 2 2
- Radio power (Max)
- 2.4G: 27dBm(Max) 5G: 27dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 24dBm/chain(Max) 5G : 24dBm/chain(Max))
- Power consumption of the device
- 16.40W
- Ethernet ports
- GE(RJ45)*1, 10M/100M/1000M auto
AP4050DE-M Manufacturer Source
AP4050DE-M Model-Specific Differences
AP4050DE-M has the following distinguishing entries in the manufacturer specification. Radio port/built-in antenna: Built-in omnidirectional antenna, dual-band MIMO, two.4G/5G two two+5G two two. Radio power (Max): two.4G: 27dBm(Max) 5G: 27dBm(Max) (note: this is MIMO total radio power, the same as: two.4G: 24dBm/chain(Max) 5G : 24dBm/chain(Max)). Ethernet ports: GE(RJ45)*one, 10M/100M/1000M auto. Power consumption of the device: sixteen.40W. MIMO: two.4G:2x25G:2x2Multi-input Multi-output, for example, four*four:four indicates that 4SU-4MU is supported..
AP4050DE-M Specification
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Floating ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Operating temperature | Operating temperature: -10~50℃ Storage temperature: -40~70℃ |
| Humidity | 5%~95% |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Safety certification | IEC/EN/UL60950-1 |
| Environment certification | RoHS |
| MIMO | 2.4G:2x25G:2x2Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain (Typical) | 2.4G:3dBi 5G:3dBi |
| Radio port/built-in antenna | Built-in omnidirectional antenna, dual-band MIMO, 2.4G/5G 22+5G 22 |
| Radio power (Max) | 2.4G: 27dBm(Max) 5G: 27dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 24dBm/chain(Max) 5G : 24dBm/chain(Max)) |
| Power consumption of the device | 16.40W |
| Ethernet ports | GE(RJ45)*1, 10M/100M/1000M auto |
| Weight (kg) | 0.7kg |
| Dimensions (W x D x H) (mm) | 200*200*47 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | No priority. Hot backup is supported:notes: 1) Hot backup is not supported; 2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 12V±10%,16V MAX, 2.1mm DC JACK |
| AP PoE input | 802.3at/af (only supported by one GE port) |
| Exact product model | AP4050DE-M |
| Product family | Huawei AirEngine/AP wireless access point |
| Official Huawei documentation | Huawei Enterprise Support results for AP4050DE-M |
AP4050DE-M Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
AP4050DE-M FAQ
What interfaces and ports does AP4050DE-M provide?
For AP4050DE-M, the manufacturer specification lists poe port surge protection as PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion.
What is the operating temperature of AP4050DE-M?
For AP4050DE-M, the manufacturer specification lists operating temperature as Operating temperature: -10~50℃ Storage temperature: -40~70℃.
What is the humidity of AP4050DE-M?
For AP4050DE-M, the manufacturer specification lists humidity as 5%~95%.
Related products
Related AP4050DE-M
AP4050DE-M-S Huawei WLAN access point exact hardware record
AP4050DE-M-S is an exact Huawei WLAN hardware PID. Operating mode and every suffix, software, controller, antenna, power, mount and lifecycle fact must match Huawei evidence and the received unit.
AP4050DE-B-S Huawei WLAN access point exact hardware record
AP4050DE-B-S is an exact Huawei WLAN hardware PID. Operating mode and every suffix, software, controller, antenna, power, mount and lifecycle fact must match Huawei evidence and the received unit.
AP4050DN Huawei AP4000 Series Indoor 2X2 Dual Band Access Points
AP4050DN has the following distinguishing entries in the manufacturer specification. Radio port/built-in antenna: Built-in omnidirectional antenna, dual-band, 2x2 MIMO. Radio power (Max): two.4G: 23dBm(Max) 5G: 23dBm(Max) (note: this is MIMO total radio power, the same as: two.4G: 20dBm/chain(Max) 5G : 20dBm/chain(Max)). Ethernet ports: GE(RJ45) x one, 1000base-T, 10M/100M/1000M auto negotiation speed;. Power consumption of the device: twelve.1W. MIMO: 2x2Multi-input Multi-output, for example, four*four:four indicates that 4SU-4MU is supported..
AP4050DN-S Huawei AP4000 Series Dual-band 802.11ac Wave 2 Access Point
AP4050DN-S PoE port surge protection: PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion; Operating temperature: Operating temperature: -10~50℃ Storage temperature: -40~70℃; Humidity: 5%~95%.
AP4050DN-HD Huawei AP4000 Series Dual Band 2x2 MIMO Access Point
AP4050DN-HD HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
AP4050DN-E Huawei AP4000 Series WiFi 5 2x2 MIMO Access Point
AP4050DN-E HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
AP4051TN AP4050DN-HD Huawei AP4000 802.11ac Wave 2 Triple-Radio AP
AP4051TN HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points
AP4030TN PoE port surge protection: PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion; Operating temperature: Operating temperature: -10~45℃ Storage temperature: -40~70℃; Humidity: 5%~95%.
ISO 9001 · ISO 14001 · ISO 45001
ISO 20000 · ISO 27001 · D&B