AP4130DN
- 763 412 7282
- +86 010 69614620
AP4130DN Overview
Order the external antenna configuration with the AP4130DN
AP4130DN uses external dual-band antennas rather than a built-in antenna-only enclosure. Huawei labels the antenna connection 2.4G/5G, specifies an RP-SMA-K connector and states that it carries both frequency bands simultaneously. Confirm the antenna set, connector fit and mounting arrangement for the delivered unit. The manufacturer appearance reference illustrates the model; the quotation must establish the actual included antennas and accessories.
Use the documented antenna references when planning placement
The hardware table lists gains of 2.5 dBi at 2.4 GHz and 4 dBi at 5 GHz for the antennas delivered with the APs. Those values describe the documented antenna configuration and should not be applied to every replacement antenna. Check the proposed antenna, installation orientation and legal radio settings when planning coverage. An external connector does not establish approval for an arbitrary antenna or an outdoor installation.
Keep the Ethernet uplink and maintenance connection separate
The exact port description identifies one GE/PoE 10/100/1000M Ethernet port with PoE input. A separate console connects a maintenance terminal for AP configuration and management. The lock connection provides physical security; the reset button restores factory settings when held for more than three seconds. Allocate the upstream switch port and cable for the single data uplink, without counting the console or antenna connector as additional Ethernet interfaces.
Choose the power source before agreeing delivery scope
The input table specifies 12 V ±10% DC or IEEE 802.3af/at PoE and gives a 10.2 W maximum consumption reference, qualified by local laws and regulations. Confirm adapter and mains-lead inclusion in the quote instead of treating support for DC input as proof of an adapter bundle. Any dual-input transfer or backup requirement must be checked against the delivered configuration; the cited input table does not provide a continuity guarantee.
Set the management and bridge acceptance criteria
Huawei describes AP4130DN as an indoor dual-band 2×2 MIMO model supporting IEEE 802.11a/b/g/n/ac, with simultaneous 2.4 GHz and 5 GHz service. Its characteristics cover small and medium enterprises and branches and describe a Fit AP plus bridge hybrid mode. The hardware table separately lists up to 256 users for Fit and 64 for Fat, with 16 VAPs per radio. Confirm software/controller compatibility and the intended bridge role before choosing a mode or setting the client-load test.
Check the enclosure, site rating and channel-rate interpretation
The AP4130DN manufacturer reference is 39.5 × 180 × 180 mm in height, width and depth, with a 0.4 kg weight, IP41 rating and 5–95% non-condensing humidity. The documented temperature is −10°C to +50°C at −60 to 1800 m, with a 1°C upper-limit reduction per 300 m from 1800 to 5000 m. Confirm delivered-revision suitability for the site. Channel rates reach 300 Mbit/s for 802.11n and 867 Mbit/s for 802.11ac; application throughput depends on the installed system and client traffic.
Document/Firmware Download
AP4130DN Specification
| Exact model | AP4130DN |
| Wireless configuration | IEEE 802.11a/b/g/n/ac ; 2×2 MIMO ; simultaneous 2.4 GHz and 5 GHz |
| Antenna type | External dual-band antenna for 2.4 GHz and 5 GHz |
| Antenna connector | RP-SMA-K; 2.4G/5G connection carries both bands |
| Documented antenna gains | 2.4 GHz:2.5 dBi; 5 GHz:4 dBi for the referenced delivered antennas |
| Included antenna scope | Confirm actual set and accessories in the quotation;reference image is not a stock-unit photo |
| Ethernet uplink | Single GE/PoE:10/100/1000M with PoE input |
| Other ports | Console for maintenance ; physical lock ; reset button |
| Power input | 12 V ±10% DC or IEEE 802.3af/at |
| Maximum consumption reference | 10.2 W ; actual maximum follows local laws and regulations |
| Backup/accessory scope | Adapter inclusion and transfer continuity require separate delivered-unit confirmation |
| Documented hybrid arrangement | Fit AP plus bridge |
| Mode-specific user references | Fit ≤256; Fat ≤64; deployment acceptance verified separately |
| VAP reference | 16 per radio |
| Dimensions H × W × D | 39.5 × 180 × 180 mm |
| Reference weight and enclosure | 0.4 kg; IP41; humidity 5–95% non-condensing |
| Operating limits | −10 to +50°C at −60–1800 m; above 1800 m derate 1°C per 300 m through 5000 m |
| Radio transmit reference | 23 dBm combined per band; local limits apply |
| Channel-rate references | 802.11n up to 300 Mbit/s ; 802.11ac up to 867 Mbit/s ; not application throughput |
AP4130DN Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
AP4130DN FAQ
What is AP4130DN?
AP4130DN is a HUAWEI AP4000 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What wireless configuration is listed for AP4130DN?
For AP4130DN, the manufacturer specification lists wireless configuration as IEEE 802.11a/b/g/n/ac ; 2×2 MIMO ; simultaneous 2.4 GHz and 5 GHz.
What antenna type is listed for AP4130DN?
For AP4130DN, the manufacturer specification lists antenna type as External dual-band antenna for 2.4 GHz and 5 GHz.
What antenna connector is listed for AP4130DN?
For AP4130DN, the manufacturer specification lists antenna connector as RP-SMA-K; 2.4G/5G connection carries both bands.
Is AP4130DN available from YYST Global?
Contact YYST Global to confirm availability for AP4130DN, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related AP4130DN
AP4130DN-DC - Huawei Indoor Access Points
AP4130DN-DC is an exact Huawei WLAN access-point hardware record. Verify its operating mode, software, wired topology, power and mounting components against Huawei documentation and the received unit.
Huawei AP4151DN Indoor Access Point
Huawei AP4151DN is an indoor 802.11ac Wave 2 access point with dual-band 2×2 radio and external antennas. Its manufacturer mainframe order reference is 50083117. Two RP-SMA-K connections serve dual-band antennas, and both Gigabit GE/PoE_IN ports support PoE input. Huawei specifies 12 V ±10% DC or IEEE 802.3af/at power; USB is unavailable with 802.3af input. The 12.3 W device-consumption reference excludes USB output power. The nominal hardware-guide enclosure is 35 × 170 × 170 mm and 0.45 kg. The image is the original manufacturer AP4151DN interface illustration, not a supplied-unit photograph.
AP4050DE-B-S
Huawei AP4050DE-B-S is an indoor 802.11ac Wave 2 access point with 2×2 MU-MIMO, two spatial streams, concurrent 2.4 GHz/5 GHz service and built-in smart antennas. Built-in Bluetooth supports positioning with eSight. The exact B-S hardware chapter lists 14.05 W maximum consumption and 23 dBm combined transmit references on each band, with regional conditions; these differ from the AP4050DE-M chapter’s 16.40 W and 27 dBm references. It supports Fat, Fit and cloud modes and DC 12 V or IEEE 802.3af/at PoE input. The manufacturer image is a Series family appearance reference; verify the supplied model label.
AP4051DN
Huawei AP4051DN is an indoor 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and simultaneous 2.4 GHz/5 GHz service. Both GE0/PoE_IN and GE1/PoE_IN are Gigabit Ethernet inputs supporting PoE; Huawei describes dual-port power backup. Its USB2.0 interface supports storage expansion. The exact hardware table lists 12 V DC or IEEE 802.3af/at input and a 12.3 W consumption reference excluding USB output, with actual maximum subject to regional rules.
AP4050DE-M
Huawei AP4050DE-M is an indoor 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and simultaneous 2.4 GHz/5 GHz service. Its built-in smart antenna array targets signal coverage as terminals move; built-in Bluetooth supports positioning with eSight. The AP supports Fat, Fit and cloud management modes. Its hardware reference is 47 × 200 × 200 mm, 0.7 kg and IP41, with 12 V DC or IEEE 802.3at/af power input and a region-qualified maximum consumption of 16.40 W.
AP4030DN
Huawei AP4030DN is an indoor dual-band IEEE 802.11ac access point with 2×2 MIMO. It serves 2.4 GHz and 5 GHz clients simultaneously and supports a Fit AP plus bridge hybrid arrangement. A single GE/PoE port connects the wired Ethernet and accepts PoE input; a separate console supports maintenance. The exact hardware chapter lists 12 V DC or IEEE 802.3af/at PoE and a region-qualified maximum power reference of 10.2 W. Fit and Fat user references differ: up to 256 and 64 respectively.
AP4030TN
Huawei AP4030TN is an indoor IEEE 802.11ac access point with 2×2 MIMO and three flexible radios. One radio is 5 GHz-only; the other two support 2.4 GHz and 5 GHz. Huawei describes 2.4G plus dual-5G access and a Fit AP plus bridge hybrid mode. GE0/PoE and GE1 provide Gigabit Ethernet connections, and USB can extend storage while supplying up to 2.5 W. Power input is 12 V DC or IEEE 802.3at PoE; the 21.5 W hardware consumption reference excludes USB output.
AP4050DN-S
Huawei AP4050DN-S is an indoor dual-band 802.11ac Wave 2 access point with 2×2 MIMO, two spatial streams and MU-MIMO. Its built-in omnidirectional dual-band antenna serves 2.4 GHz and 5 GHz simultaneously. One Gigabit GE/PoE_IN connection handles the wired uplink and PoE input; a separate console port supports maintenance. The hardware supports 12 V DC or IEEE 802.3af/at PoE, with 12.1 W region-qualified maximum consumption. Confirm the power source, management mode and supplied accessories in the quote.