Brand procurement
JUNIPER Products and Procurement - Page 3
Browse JUNIPER products for EX and QFX switching, MX and ACX routing, SRX security, Mist wireless, optics and service subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated JUNIPER Products
Juniper SRX4100-E-P-UPG Enhanced Performance Upgrade License
Juniper SRX4100-E-P-UPG enhances SRX4100 performance and application security. Confirm installed software, entitlement and lifecycle; request a quote.
Juniper S-ACX-400G-A-1 Advanced Subscription Renewal License
Juniper S-ACX-400G-A-1: one-year Advanced software, per 400G. Check ACX5448-family eligibility and the dated renewal restriction; request a quote.
Juniper S-ACX-400G-P-1 Premium Software Renewal License
Juniper S-ACX-400G-P-1 renews Premium software for ACX5448-D/M for one year, per 400G capacity. Verify renewal eligibility and request a quote.
Juniper ACX5448-L-PE FIB and VRF Scale Feature License
Juniper ACX5448-L-PE licenses FIB scale above 256K and more than 512 VRFs on ACX5448, within equipment limits. Confirm entitlement and request a quote.
Juniper ACX500-LIC-SEC IPsec and NAT Feature Activation License
Juniper ACX500-LIC-SEC activates IPsec and NAT on ACX500. Last order has passed; confirm entitlement eligibility and request a quote.
Juniper ACX500-LIC-GPS Receiver Activation License
Juniper ACX500-LIC-GPS activates the ACX500 GPS receiver. Manufacturer last order has passed; confirm license eligibility and request a quote.
Juniper ACX5448-D-FAN-AFI Airflow-In Fan Module
ACX5448-D-FAN-AFI is a Juniper cooling fan module listed for ACX5448-D-AC-AFI and ACX5448-D-DC-AFI in the official hardware compatibility matrix. Its back-to-front airflow takes air in at the rear fans and exhausts it at the front ports. The named fan row uses AIR IN and blue identification; power-module airflow must match. The order is a replacement cooling component, not a complete D router or a full set of fans. The generic official Series illustration is not a supplied-unit photograph.
Juniper ACX5448-FAN-AFO Front-to-Back Fan Module
ACX5448-FAN-AFO is the Juniper airflow-out fan module for an ACX5448 cooling configuration. Air enters at the front panel and exits through the rear fan modules: ports-to-FRUs, or front-to-back airflow. The exact official table identifies AFO with AIR OUT and orange markings and requires matching AIR OUT power modules. This is a cooling component; a complete router or fan set is not implied. The generic official Series drawing is not a supplied-unit photograph.
JUNIPER Procurement Guide
JUNIPER buyers should validate Junos and license requirements, port, optics and airflow compatibility, power option, TAA requirement and support status. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm Junos and license requirements before ordering.
- Confirm port, optics and airflow compatibility before ordering.
- Confirm power option, TAA requirement and support status before ordering.
How to compare JUNIPER models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
SRX240H-POE-TAA is a Juniper SRX240 services gateway with 16 GbE ports, four Mini-PIM slots and a 150 W PoE budget. Its official ordering row lists 1 GB RAM and 1 GB flash; Juniper lists end of support on November 30, 2020.US$ 2,142.00
Condition: New Factory Sealed
SRX4100-SYS-JB-AC is a Juniper security-gateway system combining SRX4100 hardware with Junos Software Base. Its original ordering row includes eight 10GbE interfaces, two AC supplies, four fan trays, cables and a rack-mount kit.US$ 13,350.00
Condition: New Factory Sealed
SRX4200-AC is the AC-powered Juniper SRX4200 firewall configuration. The hardware guide specifies a 1U chassis, two AC power supplies, 64 GB DDR4 memory and mirrored SSD storage; confirm software entitlements separately.US$ 10,442.00
Condition: New Factory Sealed
EX2300-48P Specification Form factor: Fixed platform Virtual Chassis configuration consisting of up to four switches Junos Fusion Enterprise Satellite device; Ports: 48-port 10/100/1000BASE-T PoE+, 4 x 1/10GbE SFP/SFP+ (optics sold separately); Dimensions (W x H x D): 17.4 x 1.75 x 12.2 in (44.19 x 4.45 x 30.98 cm) 1 rack unit.US$ 2,306.00
Condition: New Factory Sealed
ACX7300-RE is a routing-engine module for the ACX7300 platform, with an Intel x86 processor, 64GB DDR4 RAM and 100GB SSD. It is not a complete router or a traffic-facing line card.US$ 35,646.00
Condition: Condition and included assemblies confirmed by quotation
CHAS-MP-PTX3000-S is the PTX3000 spare chassis identified in Juniper’s hardware-component table. It houses the router assemblies; this chassis order alone does not specify an operational router configuration or forwarding capacity.US$ 1,500.00
Condition: Condition and included components confirmed by quotation
EX3400-24T-TAA is Juniper’s TAA-designated 24-port copper Ethernet switch with four 1/10GbE SFP/SFP+ uplinks and two 40GbE QSFP+ ports. The ordering row specifies front-to-back airflow and one JPSU-150-AC-AFO power supply; optics are separate.US$ 856.00
Condition: Condition and supplied components confirmed by quotation
ACX500-DC is the DC-powered ACX500 router, using passive cooling and weighing up to 3.9 kg. Juniper lists 65 W device power plus an 80 W PoE allowance for this configuration.US$ 36,855.00
Condition: Condition and supplied fasteners confirmed by quotation
EX2300-C-CBL-GRD is the optional cable guard for Juniper EX2300-C switches. Its front slots route connected cables to help prevent accidental unplugging; this order is a physical accessory, not a switch or a software subscription.US$ 65.00
Condition: Condition and supplied components confirmed by quotation
SRX4100-SYS-JE-DC is the two-DC-supply SRX4100 system with Junos Software Enhanced, eight 10GbE interfaces and four fan trays. It is a security gateway, not a campus switch.US$ 13,350.00
Condition: Condition and supplied components confirmed by quotation
SRX4100-SYS-JE-AC combines SRX4100 security-gateway hardware with Junos Software Enhanced. The original package specifies eight 10GbE interfaces, two AC supplies, four fan trays, cables and a rack kit.US$ 13,350.00
Condition: Condition and included components confirmed by quotation
QFX5100-96S-DC-AFO is the DC-powered, front-to-back airflow version of the 2U QFX5100-96S aggregation switch. It has 96 SFP/SFP+ ports and eight QSFP+ ports, not security-appliance interfaces.US$ 11,125.00
Condition: Condition confirmed by quotation
EX2300-24MP is an Ethernet access switch with eight 2.5GbE-capable copper ports, sixteen Gigabit copper ports and four SFP/SFP+ uplinks. Its shared PoE budget is 380 W; it is not a security appliance.US$ 1,446.00
Condition: Condition and installed components confirmed by quotation
EX4300-32F combines 32 SFP access ports with four built-in 10-Gigabit SFP+ and two built-in 40-Gigabit QSFP+ ports. This AC-powered fiber model has no PoE; extra uplink ports require an optional module.US$ 5,411.00
Condition: Accessory condition and completeness confirmed by quotation
SRX240-RMK is Juniper’s rack-mount kit for one SRX240 gateway in a 19-inch rack. It is a mounting accessory, not a network switch or security appliance.US$ 142.00
Condition: Condition and availability confirmed by quotation
EX2300-C-12T is Juniper’s fanless compact non-PoE switch. It connects 12 copper Gigabit endpoints and has two 10-Gigabit uplinks; attached devices needing power must use another power source.US$ 322.00
Condition: Condition and availability confirmed by quotation
Juniper EX2300-C-12P is a compact fanless Ethernet switch with 12 Gigabit copper access ports, PoE/PoE+ and two 10-Gigabit uplinks. The system PoE budget is 124 W, not 30 W simultaneously on every port.US$ 937.00
Condition: Spare-panel condition and availability confirmed by quotation
QFX10000-PWR-BLNK is Juniper’s spare power-supply blank cover panel for the QFX10000 modular-switch line. It is a mechanical cover, not a powered supply, security appliance or Ethernet switch. Juniper lists this exact part in its QFX10000 lifecycle notice.US$ 100.00
Condition: Condition and DC power configuration confirmed by quotation
QFX5700-BASE-DC is the DC-powered base switch configuration, not a security appliance. Its DC power modules have selectable 60 A and 80 A input settings; available output depends on the selected setting and supply voltage. Validate the facility power design and separately ordered line cards before purchase.US$ 11,000.00
Condition: Condition and itemized supplied configuration confirmed by quotation
QFX5700-BASE-AC is the AC base configuration of the Juniper QFX5700 modular switch platform. The manufacturer base packing list specifies one Routing and Control Board, one Forwarding Engine Board, two power supplies and two fan trays. Line cards ship separately and must be specified for the intended ports.US$ 11,000.00
- 1
- 2
- 3
- 4
- 5
- 6
- 23