Brand procurement
CISCO Products and Procurement - Page 44
Browse CISCO products for Catalyst and Nexus switching, ISR and Catalyst routing, Secure Firewall, enterprise wireless, optics, modules and software subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated CISCO Products
WS-C4503-E-S2+48 Cisco 4500 Switch
WS-C4503-E-S2+48 is the Cisco Catalyst 4503-E data bundle with one 1000AC supply, one Supervisor II-Plus and one WS-X4148-RJ module. The E chassis suffix distinguishes it from WS-C4503-S2+48.
WS-C4503-E-S2+48V Cisco 4500 Switch
WS-C4503-E-S2+48V is the Cisco Catalyst 4503-E PoE bundle recorded with one 1300AC supply, one Supervisor II-Plus and one WS-X4248-RJ45V module. It is not the S2+48 data bundle.
Cisco 4500 Switch WS-C4503E-S6L-1300
WS-C4503E-S6L-1300 is a Cisco Catalyst 4503-E bundle with a Supervisor 6L-E, one WS-X4648-RJ45V+E line card and a 1300W power supply. Confirm the fitted parts against the quotation.
WS-C4507R-E Cisco 4500 Switch
WS-C4507R-E is a seven-slot Cisco Catalyst E-Series chassis with supervisor positions 3 and 4 and five switching-module positions. Supervisor 8-E/8L-E requires chassis hardware revision 2.0 or higher.
WS-C4503-E Cisco 4500 Switch
WS-C4503-E is a Cisco Catalyst 4500 E-Series three-slot chassis. Slot 1 is for one supervisor; slots 2 and 3 accept switching modules. It does not support a redundant supervisor pair.
WS-C4503-S2+48 Cisco 4500 Switch
WS-C4503-S2+48 is a legacy Cisco Catalyst 4503 bundle: one 1000AC supply, one Supervisor II-Plus and one WS-X4148-RJ 48-port 10/100 module. The access module is not a 48-port Gigabit card.
Cisco C9400-S-BLANK= Catalyst 9400 Series Slot Blank Cover
C9400-S-BLANK= is Cisco’s slot blank cover for the Catalyst 9400 Series. Cisco lists C9400-PWR-BLANK= separately as the power-supply blank cover, so the two blanking components are not interchangeable order identities.
IE-4000-8T4G-E - Cisco Industrial Ethernet 4000 Series Platform
Cisco IE-4000-8T4G-E is an industrial Ethernet switch with eight Fast Ethernet copper downlinks and four Gigabit combo uplinks. It is not the 8GT Gigabit-downlink variant.
CISCO Procurement Guide
CISCO buyers should validate software and license tier, PoE budget and uplink module, airflow, power supply and stacking compatibility. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm software and license tier before ordering.
- Confirm PoE budget and uplink module before ordering.
- Confirm airflow, power supply and stacking compatibility before ordering.
How to compare CISCO models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
AIR-AP1852I-T-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token T. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP1852E-EK910C is a 1852e indoor access point for separately purchased external antennas, supplied as a configurable K910C ten-access-point pack for regulatory-domain token E. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP1852I-AK910C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a configurable K910C ten-access-point pack for regulatory-domain token A. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP1852I-FK910C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a configurable K910C ten-access-point pack for regulatory-domain token F. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP1852I-IK910C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a configurable K910C ten-access-point pack for regulatory-domain token I. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP1852I-KK910C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a configurable K910C ten-access-point pack for regulatory-domain token K. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP1852I-SK910C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a configurable K910C ten-access-point pack for regulatory-domain token S. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.US$ 200.00
Condition: New Factory Sealed
AIR-AP2802I-A-K9 is a 2802I indoor access point with integrated antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802I-C-K9 is a 2802I indoor access point with integrated antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token C. Cisco lists its channel profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-A-K9 is a 2802E indoor access point for external antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-A-K9C is a 2802E indoor access point for external antennas supplied as a single-unit, configurable order with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-AK910 is a 2802E indoor access point for external antennas supplied as a fixed-domain ten-unit eco-pack with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-AK910C is a 2802E indoor access point for external antennas supplied as a configurable ten-unit eco-pack with regulatory-domain token A. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-B-K9 is a 2802E indoor access point for external antennas supplied as a single-unit, fixed regulatory-domain order with regulatory-domain token B. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-B-K9C is a 2802E indoor access point for external antennas supplied as a single-unit, configurable order with regulatory-domain token B. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-BK910 is a 2802E indoor access point for external antennas supplied as a fixed-domain ten-unit eco-pack with regulatory-domain token B. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-BK910C is a 2802E indoor access point for external antennas supplied as a configurable ten-unit eco-pack with regulatory-domain token B. Cisco lists its channel profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-C-K9C is a 2802E indoor access point for external antennas supplied as a single-unit, configurable order with regulatory-domain token C. Cisco lists its channel profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-CK910 is a 2802E indoor access point for external antennas supplied as a fixed-domain ten-unit eco-pack with regulatory-domain token C. Cisco lists its channel profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
Condition: New Factory Sealed
AIR-AP2802E-CK910C is a 2802E indoor access point for external antennas supplied as a configurable ten-unit eco-pack with regulatory-domain token C. Cisco lists its channel profile as 2.4 GHz channels 1-13 and the 5.745-5.825 GHz upper block. Verify destination approval, controller compatibility, exact quantity, antenna bill of materials and the 31 October 2027 support horizon before purchase.US$ 450.00
- 1
- 42
- 43
- 44
- 45
- 46
- 97