AIR-AP1852I-T-K9C Cisco Aironet 1852i WiFi 5 4x4 MIMO Access Point

AIR-AP1852I-T-K9C exact order identity

AIR-AP1852I-T-K9C is a 1852i indoor access point with integrated omnidirectional antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token T with a single-unit configurable K9C order. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco rates the internal antenna system at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz, with 360-degree horizontal beamwidth. No external antenna is selected by this SKU. Preserve enclosure orientation, bracket, mounting height and post-install coverage because placement determines how the integrated pattern is used.

Order and controller boundary

Cisco lists K9C as a configurable controller-based order, and its lifecycle table describes affected K9C lines as Mobility Express products. Retain the final domain and software role on the quotation and received unit. Prove the intended controller or Mobility Express state instead of inferring it from the suffix alone.

T regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.280-5.320, 5.500-5.700 excluding 5.600-5.640, and 5.745-5.825 GHz. The T profile has a short lower block, a middle block with an internal exclusion, and a separate upper block. A generic three-band summary would hide two important boundaries. Inspect the short lower range and excluded middle sub-block in the controller export. Attach the result to the T-domain destination approval before enabling production radios.

Procurement inference: this profile combines a short lower group with a middle exclusion and an upper group, so two separate checks can be missed by a generic template. Require the controller export to demonstrate both the lower boundary and the middle gap. If either differs, stop activation and review destination settings. Keep the result with the exact T-domain asset through controller upgrades.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For this 1852 order, include the AireOS or Catalyst 9800 release actually used and note whether the unit is controller-managed or operating in an approved Mobility Express role.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. The 1852i and 1852e have different operating-temperature ranges, and an external-antenna deployment also requires a complete cable and mounting bill of materials.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. If the product came from a ten-unit pack, the 1852 carton identity must be expanded into ten individual records before support, return or replacement handling.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco explicitly makes the customer responsible for country approval; retain the lookup alongside the 1852's controller country and enabled-channel evidence.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Test the complete user path after the 1852 joins; the controller relationship alone does not prove client authentication, DHCP, DNS or application reachability.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record the security behavior verified on the deployed controller release; do not turn a family data-sheet capability into an unconditional software claim.

Operational log retention

Store the initial controller events, switch-port state, radio assignment, channel list and client test results with a consistent asset identifier. Define how long commissioning evidence is retained and who can retrieve it. A later firmware, controller or RF change should add a new dated observation rather than overwrite the original. The resulting history supports lifecycle decisions and distinguishes a new regression from the accepted baseline. Preserve the original 1852 controller join, power mode, AUX state, channel list and client tests so later changes can be compared with an accepted baseline.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. The final handover should include the exact PID, regulatory approval, serial, antenna or mounting record, power mode, both Ethernet interfaces and lifecycle owner.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852E-T-K9 - compare antenna form and domain evidence.
• AIR-AP1852I-T-K9 - compare order form and domain evidence.
• AIR-AP1852E-EK910C - compare antenna form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.