AIR-AP2802E-BK910 Cisco Aironet 2800e Eco-pack Wave 2 10 APs

AIR-AP2802E-BK910 exact order identity

AIR-AP2802E-BK910 is a Cisco Aironet 2800 Series controller-based 802.11ac Wave 2 access point order. The exact line combines a 2802E indoor access point for external antennas, regulatory-domain token B, and a fixed-domain ten-unit eco-pack.

Antenna boundary

Cisco documents four RP-TNC antenna connectors plus a Smart Antenna connector on the 2802E. Antennas are a separate engineered part of the deployment bill of materials. Before release, record each Cisco-supported antenna part number, connector use, gain, pattern, cable type, cable loss, mounting orientation and local approval. A connector fit alone does not establish RF performance or regulatory suitability.

Order-form boundary

Cisco's ordering convention uses K910 for a ten-access-point eco-pack. The carton part number does not replace serial-level control, and all ten units must retain the stated regulatory-domain identity. Reconcile ten chassis serials and MAC addresses against the carton and purchase line. Assign every unit to a destination and controller record; a quantity shortage, mixed domain or substituted antenna form is a receiving exception. Because this is a fixed-domain line, a quotation or received label carrying another domain is a different order and requires a fresh approval. The carton is not the deployable asset: each of the ten access points needs its own serial, location, controller and acceptance result.

B regulatory-domain channel evidence

Cisco's 2800 Series data sheet lists the B profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. The B plan contains a broad middle 5 GHz range followed by a separate upper block. Capacity planning should identify which radios use each block and should not copy a narrower domain's channel template.

Retain a controller export showing the enabled lower, middle and upper channel sets. Compare the installed country setting, dynamic channel assignment and survey plan before accepting the site. Regulatory-domain letters are identifiers, not country names; use Cisco's compliance tool for the actual deployment country and retain the lookup date.

Procurement inference: the comparatively broad middle range and separate upper range can influence how capacity is distributed across radios. Preserve the survey's planned channel groups and compare them with the controller's dynamic assignment after a representative operating period. If the destination authorization narrows the available set, update the capacity calculation and acceptance record rather than leaving a B-profile assumption in the design.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims.

Capacity observation

Define the expected concurrent clients, application mix, airtime utilization and channel-width assumptions for this location. After commissioning, capture radio utilization, retry behavior and representative throughput during a meaningful load period. Compare the observation with the survey design and state any shortfall. A peak link rate from a data sheet is not a site capacity result and should not replace measured operating evidence.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation.

Related Aironet 2802 order records

• AIR-AP2802I-B-K9 - compare antenna architecture and regulatory-domain evidence.
• AIR-AP2802I-BK910C - compare antenna architecture and regulatory-domain evidence.
• AIR-AP2802I-B-K9C - compare antenna architecture and regulatory-domain evidence.

Official evidence: Cisco Aironet 2800 Series data sheet; Cisco 2800 Series getting started guide; Cisco 2800 Series support and lifecycle page; and Cisco wireless compliance tool.