Huawei AP5010DN-AGN Indoor Access Point

Make the adapter decision using the exact ordering line

The name AP5010DN-AGN by itself is not enough to establish the contents of a shipment. Huawei lists mainframe 02355547 with no AC/DC adapter and bundle 02358264 with an AC/DC adapter. Both descriptions identify an indoor 802.11n, dual-frequency 2×2 design with a built-in antenna. This page tracks the AP5010DN-AGN mainframe identity. Specify the required order reference and power arrangement on the quotation; an adapter must not be assumed to accompany the mainframe just because another ordering line includes one.

Use the ETH/PoE connection for the wired uplink

The manufacturer appearance table explicitly includes AP5010DN-AGN in the illustrated AP3010/AP5010/AP6010 group. The picture labels the DC socket, Default button, ETH/PoE port, console port and security slot. Its interface legend gives ETH/PoE a 10/100/1000 Mbit/s Ethernet rate and PoE-input role. Plan the wired connection around that interface. GE1 and GE0/PoE descriptions elsewhere in the same multi-model chapter belong to other illustrated layouts; they are not extra Ethernet ports on this model.

Keep WLAN generation and antenna identity on the order checklist

The exact 02355547 entry says 11n, 2x2 Double Frequency and Built-in Antenna. It does not establish 802.11ac, Wave 2, MU-MIMO or external-antenna connectors. Check that this WLAN generation suits the intended clients and deployment. AP5010SN-GN appears alongside it in the guide but has a separate single-frequency ordering line, so a supplier should not silently substitute that model. Software, controller and regional operating requirements need to be confirmed for the offered unit.

Choose a compliant DC or PoE source before installation

The basic table covering AP5010DN-AGN specifies DC 12 V ±10% or IEEE 802.3af/at PoE. The maximum-consumption list assigns 9.5 W to AP5010DN-AGN, with the manufacturer warning that the actual maximum depends on local laws and regulations. Select the supported power supply for the actual installation and agree adapter inclusion in the order. These are AP input specifications; they do not describe a PoE-output service for another downstream device.

Check enclosure clearance and the indoor environment

The named-model table records an enclosure of 50 × 180 × 180 mm in height, width and depth, a weight of 0.4 kg, 256 MB DDR2 and 32 MB flash memory. The IP rating is IP31. The operating range is −10°C to +50°C at altitudes from −60 m to 1800 m; above 1800 m through 5000 m, the upper temperature limit decreases by 1°C per 300 m. Maintain 5–95% non-condensing humidity. Use these limits to assess the mounting position rather than treating this indoor AP as weatherproof equipment.

Separate receiving checks from management and reset operations

Match the equipment label to AP5010DN-AGN and the agreed mainframe or bundle reference. Check the built-in-antenna enclosure, ETH/PoE link and any ordered adapter before commissioning. The console interface connects to a maintenance terminal for configuration and management. Huawei says holding Default for more than three seconds restores factory settings, so use it only as an intended reset operation. The shared interface drawing is an identification aid and does not document the condition, packaging or revision of the unit offered for sale.

Document/Firmware Download

• Huawei AP5010DN-AGN mainframe 02355547 and adapter bundle 02358264
• Huawei named-model appearance table and ETH/PoE / console legend
• Huawei AP5010DN-AGN 9.5 W entry and shared named-model basic specifications
• Huawei shared AP3010/AP5010/AP6010 numbered interface illustration