Huawei AP5010DN-AGN-DC Access Point Bundle

Order the DC bundle by external model and part number

Huawei’s Hardware Center maps external model AP5010DN-AGN-DC to BOM 02358264. Its description is AP5010DN-AGN Bundle and explicitly includes an AC/DC adapter. The separate 02355547 row maps to AP5010DN-AGN Mainframe with no AC/DC adapter. Keep AP5010DN-AGN-DC and 02358264 together on the purchase order. This distinction establishes the intended bundle scope; it does not establish the contents or condition of any particular offered shipment before inspection.

Inspect the adapter as a bundle component

The AC/DC adapter is the procurement difference that the exact bundle row documents. Confirm its label, electrical output and destination plug arrangement with the quotation and delivered equipment. The underlying AP5010DN-AGN basic table permits 12 V ±10% DC. Match the adapter to that documented AP input instead of selecting a supply from the letters DC alone. The cited order description does not identify a particular adapter part number, cable length, regional plug or mounting-accessory kit, so these details require confirmation.

The included AP remains an 802.11n dual-frequency model

The 02358264 description specifies 11n, 2x2 Double Frequency and Built-in Antenna. Including an adapter does not change that radio identity or make this an 802.11ac, Wave 2 or Wi-Fi 6 device. This is also distinct from AP5010SN-GN-DC, whose separate 02358263 order description is single-frequency. Check the WLAN clients and deployment requirements against the exact model ordered, and record the software and management-platform compatibility required for the installation.

Connect Ethernet and management to the documented AP interfaces

The shared appearance table names AP5010DN-AGN among the devices shown with DC12V, Default, ETH/PoE, Console and a security slot. The ETH/PoE legend specifies 10/100/1000 Mbit/s and a PoE-input function, while Console connects to a maintenance terminal. These describe the AP inside this bundle. They do not imply a separate PoE injector or a second wired data port in the package. Confirm whether the site will use the included adapter or a compliant IEEE 802.3af/at source before connecting equipment.

Allow for the AP enclosure and its indoor operating limits

For AP5010DN-AGN, the named-model specification table gives 50 × 180 × 180 mm, 0.4 kg, 256 MB DDR2 and 32 MB flash. These values describe the AP, not the bundle’s packaged weight or shipping dimensions. The IP31 unit operates from −10°C to +50°C at −60–1800 m with upper-temperature derating of 1°C per 300 m above 1800 m through 5000 m. Humidity is 5–95% non-condensing. Determine the mounting clearance and indoor location using these device limits.

Verify the order scope before testing the installation

Receive against the complete AP5010DN-AGN-DC identity and part 02358264; record the AP label, adapter label and agreed accessories. Huawei lists AP5010DN-AGN at 9.5 W maximum reference consumption, qualified by local laws and regulations. That is an AP consumption figure, not an efficiency or output rating for the bundled adapter. After the hardware and supply checks, validate Ethernet link and the intended WLAN service using a confirmed software/platform combination. Stock, dispatch, condition and warranty terms remain subject to the actual quotation.

Document/Firmware Download

• Huawei exact external-model AP5010DN-AGN-DC to bundle 02358264 mapping
• Huawei AP5010DN-AGN mainframe 02355547 and adapter bundle 02358264
• Huawei named-model appearance table and ETH/PoE / console legend
• Huawei AP5010DN-AGN 9.5 W entry and shared named-model basic specifications
• Huawei shared AP3010/AP5010/AP6010 numbered interface illustration