Brand procurement
ARUBA Products and Procurement - Page 2
Browse ARUBA products for Aruba CX switching, campus access points, mobility gateways, Instant On products, optics and network management licenses. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated ARUBA Products
R3K00ACM - HPE Aruba CM AP-AC2-12B Power Adapter
R3K00ACM identifies the Aruba CM AP-AC2-12B external desktop AC/DC adapter. It is a power accessory, not Wi-Fi hardware. Verify the exact unit rating and connection before replacement.
JX990ACM - Aruba CM AP-AC-12V30B Power Adapter
JX990ACM is the Aruba CM AP-AC-12V30B desktop AC/DC power adapter. HPE lists this accessory at 12 V/30 W in its Aruba 510 Series reference; it is not an access point.
R3K00A - HPE Aruba AP-AC2-12B Power Adapter
R3K00A identifies the HPE Aruba AP-AC2-12B external AC/DC desktop power adapter. It is a power accessory, not a wireless access point; confirm the offered unit label and device requirements before purchase.
HPE Aruba R2H25A AP-505 (EG) Campus Access Point
R2H25A is the AP-505 (EG) indoor campus access point in the Aruba 500 Series, with internal antennas and two 2x2 Wi-Fi 6 radios.
HPE Aruba JZ031A AP-345 (RW) Unified Campus Access Point
JZ031A identifies the Aruba AP-345 (RW) unified campus access point with internal antennas. Its two 4x4 radios support conventional dual-band or optional dual-5-GHz operation, with a 2.5 GbE SmartRate and a separate 1 GbE uplink.
HPE Aruba JZ038A AP-345 (IL) FIPS/TAA Campus Access Point
HPE lists JZ038A as the IL FIPS/TAA variant of AP-345. It is an internal-antenna campus access point with dual 4x4 MU-MIMO radios, not an AP22 or an external-connector AP-344.
HPE Aruba JZ036A AP-345 (JP) FIPS/TAA Campus Access Point
The JZ036A order identifies Aruba AP-345 (JP) FIPS/TAA with internal antennas. The 340-series hardware has dual 4x4 MU-MIMO radios and distinct 2.5 GbE SmartRate and 1 GbE Ethernet interfaces.
HPE Aruba JZ034A AP-345 (US) FIPS/TAA Campus Access Point
JZ034A is HPE Aruba AP-345 (US) FIPS/TAA, an internal-antenna unified campus AP with two 4x4 MU-MIMO radios. Its SmartRate network port negotiates up to 2.5 GbE; a second port supports 1 GbE.
ARUBA Procurement Guide
ARUBA buyers should validate controller-based versus Instant operation, country code, radio and antenna variant, PoE source, mounting kit and subscription. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm controller-based versus Instant operation before ordering.
- Confirm country code, radio and antenna variant before ordering.
- Confirm PoE source, mounting kit and subscription before ordering.
How to compare ARUBA models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Condition confirmed by quotation
JZ335A is the Japan-designated AP-535 campus access point. Its internal-antenna design combines 4x4 Wi-Fi 6 radios on 2.4 GHz and 5 GHz, with a maximum combined radio rate of 2.97 Gbps.US$ 350.00
Condition: Condition confirmed by quotation
JZ341A is the AP-534 (RW) TAA external-antenna campus AP. Its 530-series platform supports Wi-Fi 6 and two up-to-5-Gbps Ethernet ports; it is not limited to two gigabit-only connections.US$ 350.00
Condition: Condition confirmed by quotation
JZ339A is HPE Aruba AP-534 (IL) TAA: a Wi-Fi 6 campus AP using external antennas and dual 4x4 radios. It is not the 330-series Wi-Fi 5 equipment previously described here.US$ 350.00
Condition: Condition confirmed by quotation
HPE lists JZ338A as the EG TAA order for AP-534. This 530-series campus AP has external antennas, 4x4 radios on both bands and a published 2.97 Gbps combined maximum radio rate.US$ 350.00
Condition: Condition confirmed by quotation
JZ340A identifies the AP-534 (JP) TAA campus access point. This is a dual-radio 4x4 Wi-Fi 6 model with external antennas, not a 340-series Wi-Fi 5 AP.US$ 350.00
Condition: Condition confirmed by quotation
R3J17A is the AP-MNT-C Type C bracket kit for a 9/16-inch-profile suspended-ceiling rail. HPE lists it as a campus AP mounting option.US$ 15.00
Condition: Condition confirmed by quotation
Q9G71A is the AP-MNT-MP10-D solid-surface mounting bracket kit. The manufacturer order is a ten-pack for campus AP installation.US$ 15.00
Condition: Condition confirmed by quotation
HPE identifies Q9G70A as AP-MNT-MP10-C: ten mounting brackets for a 9/16-inch-profile ceiling rail. The order describes AP mounting parts rather than wireless electronics.US$ 15.00
Condition: Condition confirmed by quotation
Q9G69A is the AP-MNT-MP10-B pack of ten campus AP mounting brackets for a 15/16-inch flat ceiling rail. It is a mounting accessory order, not an AP22.US$ 15.00
Condition: Condition confirmed by quotation
JY705A is the AP-200-MNT-W3 low-profile, box-style mount for a small indoor AP on a flat surface. It is not an Instant On 1930 Ethernet switch.US$ 160.00
Condition: Condition confirmed by quotation
JW047A is the white AP-220-MNT-W1W accessory for mounting an AP on a flat wall or ceiling. HPE lists it under mount accessories.US$ 200.00
Condition: Condition confirmed by quotation
JW046A is the black AP-220-MNT-W1 mounting kit for a flat wall or ceiling surface. It is a basic AP mount, not an 802.11ac access point.US$ 200.00
Condition: Condition confirmed by quotation
JX961A identifies the industrial-grade AP-MNT-CM1 metal mount for an indoor AP on a suspended-ceiling rail. It is an installation component.US$ 200.00
Condition: Condition confirmed by quotation
JW045A is the AP-220-MNT-C2 mounting kit. Its two adapters are intended for Interlude and Silhouette ceiling-grid profiles.US$ 200.00
Condition: Condition confirmed by quotation
JW044A supplies two ceiling-grid adapters for basic flat rails. HPE identifies this mounting accessory as AP-220-MNT-C1, not a wireless radio.US$ 200.00
Condition: Condition confirmed by quotation
JY728A is the AP-CBL-SERU console adapter cable. HPE identifies its interfaces as Micro-USB TTL 3.3 V and USB 2.0; it is an AP console accessory, not a wireless access point.US$ 15.00
Condition: Condition confirmed by quotation
Q9H56A is the AP-514 Japan-designated campus AP with external antennas. HPE specifies dual-radio 4x4/2x2 Wi-Fi 6, not an internal-antenna AP-515 configuration.US$ 260.00
Condition: Condition confirmed by quotation
Q9H66A identifies the Japan-designated AP-514 TAA order, with external antennas and asymmetric 4x4/2x2 Wi-Fi 6 radios. It is not an internal-antenna AP-505.US$ 260.00
Condition: Condition confirmed by quotation
Q9H65A is the AP-514 (IL) TAA external-antenna order. Its Wi-Fi 6 radios use a 4x4/2x2 configuration, rather than the AP-505 identity previously associated with this listing.US$ 260.00
Condition: Condition confirmed by quotation
HPE identifies JL676A as the CX 6100 48G 4SFP+ access switch. It provides 48 Gigabit access connections and four SFP+ uplinks using the AOS-CX software platform.US$ 1,136.00
- 1
- 2
- 3
- 4
- 5
- 6
- 17