HPE Aruba JL679A CX 6100 12-Port PoE+ 139 W Switch
- 763 412 7282
- +86 010 69614620
JL679A Overview
A fanless access switch for a small port count
HPE identifies JL679A as the CX 6100 12G Class4 PoE 2G/2SFP+ 139W model. The port arrangement combines 12 10/100/1000BASE-T access connections with two additional Gigabit connections and two optical uplink slots supporting 1G or 10G. Check the required uplink media and optics separately from the powered-device port schedule.
Distinguish PoE delivery from input power
The exact-model QuickSpecs column gives up to 139 W of Class 4 PoE and support for IEEE 802.3af and 802.3at. That is an aggregate endpoint budget, not 139 W at every port. The electrical table, measured at 230 VAC, separately lists 16 W idle, 21.9 W maximum without PoE and 170 W maximum with PoE. Use the appropriate figure when planning a UPS or circuit; the PoE budget alone is not the total input requirement.
Fit the installation to the enclosure
The specified chassis measures 4.39 cm high, 25.4 cm wide and 25.5 cm deep, with a configuration weight of 2.78 kg. JL679A is fanless. The official mounting options include a standard 19-inch rack, a horizontal surface and a wall. Confirm the offered mounting accessories and leave the required clearance rather than treating the chassis dimensions as a complete installation envelope.
Capacity and operating limits
HPE lists 68 Gbps switching capacity and 45.1 Mpps throughput for this model. Normal operating temperature is 0 to 45 degrees Celsius up to 1.5 km altitude, with the maximum reduced by 1 degree Celsius for each further 305 m, up to 3 km. These are exact-model limits, not the higher port count or power figures from other CX 6100 variants.
Before ordering JL679A
Provide the endpoint power schedule, optical link requirements, mounting location and local power-cord requirement. Confirm installed software, management suitability, actual unit condition and support terms on the quotation. USB-C console and USB Type-A host connections are documented, but this listing makes no blanket promise about every software feature or included transceiver.
HPE CX 6100 QuickSpecs, JL679A technical specifications supports the model facts above; the official JL679A product listing confirms the ordering identity.
JL679A Specification
| Exact order code | JL679A |
|---|---|
| Family | HPE Aruba Networking CX 6100 |
| Access interfaces | 12 x 10/100/1000BASE-T |
| Additional connections | 2 x 1GbE; 2 x 1G/10G SFP |
| PoE standards | IEEE 802.3af and 802.3at |
| Shared Class 4 PoE budget | Up to 139 W |
| Cooling | Fanless |
| Switching capacity | 68 Gbps |
| Throughput capacity | 45.1 Mpps |
| Memory and storage | 4 GB DDR3; 16 GB eMMC |
| Height x width x depth | 4.39 x 25.4 x 25.5 cm |
| Configuration weight | 2.78 kg |
| Power consumption at 230 VAC | Idle 16 W; maximum without PoE 21.9 W; maximum with PoE 170 W |
| Local connections | USB-C console; USB Type-A host |
| Operating temperature | 0 to 45 C up to 1.5 km; derate maximum by 1 C per 305 m up to 3 km |
Document/Firmware Download
Official CX 6100 QuickSpecs with the JL679A column; HPE product documentation entry.
JL679A Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
JL679A FAQ
What is JL679A?
HPE Aruba JL679A CX 6100 12-Port PoE+ 139 W Switch is a ARUBA Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What interfaces and ports does JL679A provide?
For JL679A, the manufacturer specification lists access interfaces as 12 x 10/100/1000BASE-T.
What are the power requirements for JL679A?
For JL679A, the manufacturer specification lists poe standards as IEEE 802.3af and 802.3at.
What is the switching capacity of JL679A?
For JL679A, the manufacturer specification lists switching capacity as 68 Gbps.
Is JL679A available from YYST Global?
Contact YYST Global to confirm availability for JL679A, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related JL679A
HPE Aruba JL678A CX 6100 24G 4SFP+ Non-PoE Switch
JL678A is the Aruba CX 6100 non-PoE switch with 24 Gigabit copper ports, four 1G/10G uplinks and a 33W maximum power rating. Request a quote.
HPE Aruba JL677A CX 6100 24-Port PoE+ 370 W Switch
JL677A is the HPE Aruba CX 6100 access switch with 24 Gigabit copper ports, four 1/10G SFP uplinks and a 370 W Class 4 PoE budget. This budget is shared by connected powered devices; it is not the supply available to each port.
HPE Aruba JL676A CX 6100 48G 4SFP+ Switch
HPE identifies JL676A as the CX 6100 48G 4SFP+ access switch. It provides 48 Gigabit access connections and four SFP+ uplinks using the AOS-CX software platform.
HPE Aruba JL675A CX 6100 48G Class 4 PoE 370W Switch
JL675A is the HPE Aruba CX 6100 48G Class 4 PoE switch with four SFP+ uplinks and a 370W PoE budget. The 740W model is R9Y04A, not this order.
HPE Aruba JL581A CX 8320 48-Port Copper Switch Bundle
JL581A is an Aruba CX 8320 bundle: 48 copper ports, 6 QSFP+ uplinks, 2 PSUs and 5 fans. Brand logo reference. Request a quote.
JL817A-HPE Aruba 4100i Switch-12p 1GbE 8p Class4 PoE 4p Class6 PoE
JL817A is listed in Aruba Switches. Check model compatibility, current stock, condition and quotation details.
HPE Aruba R8N89A CX 6000 12-Port PoE+ 139 W Switch
R8N89A is the fanless CX 6000 12G Class4 PoE model with a shared 139 W budget, two additional Gigabit ports and two 1G SFP connections. HPE specifies 32 Gbps switching capacity, 23.8 Mpps throughput and 4 GB DDR3 for this A-revision model.
HPE Aruba R8N88A CX 6000 24-Port Gigabit Switch with 4 SFP Uplinks
HPE Aruba R8N88A is the CX 6000 24G 4SFP switch: 24 Gigabit copper connections and four 1G optical uplinks. Its exact-model table lists 56 Gbps switching capacity, 41.6 Mpps throughput and 4 GB DDR3 memory.