Brand procurement
Browse ARUBA products for Aruba CX switching, campus access points, mobility gateways, Instant On products, optics and network management licenses. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Recently updated

R3K00ACM identifies the Aruba CM AP-AC2-12B external desktop AC/DC adapter. It is a power accessory, not Wi-Fi hardware. Verify the exact unit rating and connection before replacement.

JX990ACM is the Aruba CM AP-AC-12V30B desktop AC/DC power adapter. HPE lists this accessory at 12 V/30 W in its Aruba 510 Series reference; it is not an access point.

R3K00A identifies the HPE Aruba AP-AC2-12B external AC/DC desktop power adapter. It is a power accessory, not a wireless access point; confirm the offered unit label and device requirements before purchase.

R2H25A is the AP-505 (EG) indoor campus access point in the Aruba 500 Series, with internal antennas and two 2x2 Wi-Fi 6 radios.

JZ031A identifies the Aruba AP-345 (RW) unified campus access point with internal antennas. Its two 4x4 radios support conventional dual-band or optional dual-5-GHz operation, with a 2.5 GbE SmartRate and a separate 1 GbE uplink.

HPE lists JZ038A as the IL FIPS/TAA variant of AP-345. It is an internal-antenna campus access point with dual 4x4 MU-MIMO radios, not an AP22 or an external-connector AP-344.

The JZ036A order identifies Aruba AP-345 (JP) FIPS/TAA with internal antennas. The 340-series hardware has dual 4x4 MU-MIMO radios and distinct 2.5 GbE SmartRate and 1 GbE Ethernet interfaces.

JZ034A is HPE Aruba AP-345 (US) FIPS/TAA, an internal-antenna unified campus AP with two 4x4 MU-MIMO radios. Its SmartRate network port negotiates up to 2.5 GbE; a second port supports 1 GbE.
ARUBA buyers should validate controller-based versus Instant operation, country code, radio and antenna variant, PoE source, mounting kit and subscription. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Condition confirmed by quotation
JL675A is the HPE Aruba CX 6100 48G Class 4 PoE switch with four SFP+ uplinks and a 370W PoE budget. The 740W model is R9Y04A, not this order.US$ 1,420.00
Condition: Condition confirmed by quotation
JZ021A identifies the Aruba AP-344 (RW) Unified Access Point order. Preserve the full part number and regional variant when requesting a quotation; it is not an Instant On AP22.US$ 210.00
Condition: Condition confirmed by quotation
JZ037A identifies the Aruba AP-345 (IL) Unified Access Point order. Preserve the full part number and regional variant when requesting a quotation; it is not an Instant On AP22.US$ 210.00
Condition: New Factory Sealed
Q9H54A is the HPE Aruba AP-514 Egypt (EG) Unified Campus AP order with external antennas. Its mount kit and antennas are separate configuration items in HPE QuickSpecs.US$ 260.00
Condition: New Factory Sealed
HPE Aruba Q9H58A is the US-region AP-514 unified indoor campus access point. HPE specifies Wi-Fi 6, 2x2:2 at 2.4 GHz, 4x4:4 at 5 GHz, four RP-SMA external-antenna connectors, one 2.5GbE and one 1GbE interface, plus Bluetooth 5 and Zigbee.US$ 260.00
Condition: New Factory Sealed
HPE Aruba Q9H64A is the Egypt-region, TAA AP-514 unified indoor campus access point. HPE lists Wi-Fi 6, 2x2:2 at 2.4 GHz, 4x4:4 at 5 GHz, four RP-SMA connectors, one 2.5GbE and one 1GbE interface, Bluetooth 5 and Zigbee.US$ 260.00
Condition: New Factory Sealed
HPE Aruba JZ346A is the AP-535 Rest-of-World TAA unified indoor campus access point with dual-radio 4x4 Wi-Fi 6 and internal antennas.US$ 145.00
Condition: New Factory Sealed
HPE Aruba JZ342A is the AP-534 US TAA unified indoor campus access point with dual-radio 4x4 Wi-Fi 6 and external antennas. Its US, TAA and AP-534 identities must remain together; it is not an AP-535 internal-antenna model.US$ 145.00
Condition: New Factory Sealed
R7S99A is the US AP-584, an external-antenna outdoor Wi-Fi 6 access point in the HPE Aruba Networking 580 series. The official order identifies dual-radio 4×4 operation; it is not a 570-series model.US$ 300.00
Condition: Electronic license; order eligibility and included entitlement confirmed on quotation
JZ379AAE identifies the FIPS/TAA MCR-VA-10K-F1 virtual Mobility Conductor license for 10,000 devices. It is an electronic licensing article, not an enterprise network switch.US$ 60.00
Condition: Regional variant, condition and included accessories confirmed on quotation
Aruba JW785A identifies the Japan-region 7240XM mobility controller: four 10GBase-X SFP+ interfaces and two dual-personality Gigabit interfaces. It belongs to the 7200 family, not the MSM series or a campus-switch product line.US$ 8,000.00
Condition: Exact regional variant, condition and supplied configuration confirmed by quotation
JW750A is the Japan-region FIPS/TAA ordering variant of the Aruba 7210 mobility controller. Its published interfaces are four 10GBase-X SFP+ ports and two dual-personality Gigabit copper/SFP ports. It is not an MSM controller or an access point.US$ 200.00
Condition: Condition and supplied configuration confirmed by quotation
JX925A denotes the standard IL Aruba 7008 controller: eight Gigabit copper ports, 100 W PoE+, and a 16-AP/1K-client designation. It is not an access point.US$ 200.00
Condition: Condition and exact compliance variant confirmed by quotation
JX929A is the IL FIPS/TAA ordering variant of the Aruba 7008 controller. HPE lists eight Gigabit copper ports, 100 W PoE+ and a 16-AP/1K-client designation.US$ 200.00
Condition: Condition and power accessories confirmed by quotation
JY849A identifies the Aruba 7005 EG branch controller, with four Gigabit copper ports and a 16-AP capacity designation. It is a controller, not a wireless access point.US$ 200.00
Condition: New Factory Sealed
Aruba JW689A is the Japan-region 7030 mobility controller with eight dual-personality 10/100/1000BASE-T or 1GBASE-X SFP ports, support for 64 access points and 4,000 clients.US$ 4,000.00
Condition: New Factory Sealed
HPE Aruba R1C72ACM is the CM AP-MNT-MP10-E campus access-point mount bracket kit supplied as a 10-pack. HPE identifies it as the type E wall-box mounting option. It is mounting hardware only, not an access point.US$ 15.00
US$ 200.00
Condition: New Factory Sealed
JW709A is the Japan-region FIPS/TAA Aruba 7024 controller with 24 ports, a 400W PoE+ identity, 10GBase-X SFP+ connectivity and published scale for 32 APs and 2,000 clients.US$ 2,000.00
Condition: New Factory Sealed
JW753A is the Rest-of-World FIPS/TAA Aruba 7220 controller with four 10GBase-X SFP+ ports and two dual-personality Gigabit copper-or-SFP ports.US$ 3,000.00