Brand procurement
Browse ARUBA products for Aruba CX switching, campus access points, mobility gateways, Instant On products, optics and network management licenses. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Recently updated

JZ321A is the United States Aruba AP-303 order: internal antennas, dual 2x2:2 MU-MIMO radios and one Gigabit Ethernet port. It uses 802.11ac Wave 2 at 5 GHz; verify the exact unit label and installation location.

JZ319A is the Japan-designated Aruba AP-303 with internal antennas, dual 2x2:2 radios and one Gigabit Ethernet port. Its 5 GHz radio uses 802.11ac Wave 2; confirm the unit label and installation requirements.

Aruba JZ318A identifies AP-303 hardware: internal antennas, two 2x2:2 radios, 802.11ac Wave 2 and a single Gigabit Ethernet port. Verify the exact order label, local approval and power items before purchase.

JY728ACM is the HPE Aruba CM AP-CBL-SERU cable for the custom micro-USB AP console interface. HPE documents a 505C compatibility footnote and lists the cable among 510-series accessories; confirm the exact receiving AP.

Q9G71ACM is the Aruba CM AP-MNT-MP10-D Type D mounting-kit ten-pack. Aruba directs replacement orders to Q9G71A after the CM pilot sale cutoff; confirm the receiving AP, mounting surface and supplied fittings.

Q9G69ACM is the HPE Aruba CM AP-MNT-MP10-B Campus AP mounting bracket kit: Type B, 10-pack. HPE lists the individual CM AP-MNT-B kit separately; verify the exact CM mounting interface for the installation.

JZ317A is the HPE Aruba AP-303 (EG): dual-radio 802.11ac Wave 2, 2x2:2 MIMO, internal antennas and one Gigabit Ethernet uplink. Confirm regional eligibility and power items before requesting a quote.
JZ148AAE is the Aruba LIC-VIA per-client E-LTU VPN license. Verify VIA users, controller licensing and activation; request a quote.
ARUBA buyers should validate controller-based versus Instant operation, country code, radio and antenna variant, PoE source, mounting kit and subscription. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Condition confirmed by quotation
JW045A is the AP-220-MNT-C2 mounting kit. Its two adapters are intended for Interlude and Silhouette ceiling-grid profiles.US$ 200.00
Condition: Condition confirmed by quotation
JW044A supplies two ceiling-grid adapters for basic flat rails. HPE identifies this mounting accessory as AP-220-MNT-C1, not a wireless radio.US$ 200.00
Condition: Condition confirmed by quotation
JY728A is the AP-CBL-SERU console adapter cable. HPE identifies its interfaces as Micro-USB TTL 3.3 V and USB 2.0; it is an AP console accessory, not a wireless access point.US$ 15.00
Condition: Condition confirmed by quotation
Q9H56A is the AP-514 Japan-designated campus AP with external antennas. HPE specifies dual-radio 4x4/2x2 Wi-Fi 6, not an internal-antenna AP-515 configuration.US$ 260.00
Condition: Condition confirmed by quotation
Q9H66A identifies the Japan-designated AP-514 TAA order, with external antennas and asymmetric 4x4/2x2 Wi-Fi 6 radios. It is not an internal-antenna AP-505.US$ 260.00
Condition: Condition confirmed by quotation
Q9H65A is the AP-514 (IL) TAA external-antenna order. Its Wi-Fi 6 radios use a 4x4/2x2 configuration, rather than the AP-505 identity previously associated with this listing.US$ 260.00
Condition: Condition confirmed by quotation
HPE identifies JL676A as the CX 6100 48G 4SFP+ access switch. It provides 48 Gigabit access connections and four SFP+ uplinks using the AOS-CX software platform.US$ 1,136.00
Condition: Condition confirmed by quotation
JL675A is the HPE Aruba CX 6100 48G Class 4 PoE switch with four SFP+ uplinks and a 370W PoE budget. The 740W model is R9Y04A, not this order.US$ 1,420.00
Condition: Condition confirmed by quotation
JZ021A identifies the Aruba AP-344 (RW) Unified Access Point order. Preserve the full part number and regional variant when requesting a quotation; it is not an Instant On AP22.US$ 210.00
Condition: Condition confirmed by quotation
JZ037A identifies the Aruba AP-345 (IL) Unified Access Point order. Preserve the full part number and regional variant when requesting a quotation; it is not an Instant On AP22.US$ 210.00
Condition: New Factory Sealed
Q9H54A is the HPE Aruba AP-514 Egypt (EG) Unified Campus AP order with external antennas. Its mount kit and antennas are separate configuration items in HPE QuickSpecs.US$ 260.00
Condition: New Factory Sealed
HPE Aruba Q9H58A is the US-region AP-514 unified indoor campus access point. HPE specifies Wi-Fi 6, 2x2:2 at 2.4 GHz, 4x4:4 at 5 GHz, four RP-SMA external-antenna connectors, one 2.5GbE and one 1GbE interface, plus Bluetooth 5 and Zigbee.US$ 260.00
Condition: New Factory Sealed
HPE Aruba Q9H64A is the Egypt-region, TAA AP-514 unified indoor campus access point. HPE lists Wi-Fi 6, 2x2:2 at 2.4 GHz, 4x4:4 at 5 GHz, four RP-SMA connectors, one 2.5GbE and one 1GbE interface, Bluetooth 5 and Zigbee.US$ 260.00
Condition: New Factory Sealed
HPE Aruba JZ346A is the AP-535 Rest-of-World TAA unified indoor campus access point with dual-radio 4x4 Wi-Fi 6 and internal antennas.US$ 145.00
Condition: New Factory Sealed
HPE Aruba JZ342A is the AP-534 US TAA unified indoor campus access point with dual-radio 4x4 Wi-Fi 6 and external antennas. Its US, TAA and AP-534 identities must remain together; it is not an AP-535 internal-antenna model.US$ 145.00
Condition: New Factory Sealed
R7S99A is the US AP-584, an external-antenna outdoor Wi-Fi 6 access point in the HPE Aruba Networking 580 series. The official order identifies dual-radio 4×4 operation; it is not a 570-series model.US$ 300.00
Condition: Electronic license; order eligibility and included entitlement confirmed on quotation
JZ379AAE identifies the FIPS/TAA MCR-VA-10K-F1 virtual Mobility Conductor license for 10,000 devices. It is an electronic licensing article, not an enterprise network switch.US$ 60.00
Condition: Regional variant, condition and included accessories confirmed on quotation
Aruba JW785A identifies the Japan-region 7240XM mobility controller: four 10GBase-X SFP+ interfaces and two dual-personality Gigabit interfaces. It belongs to the 7200 family, not the MSM series or a campus-switch product line.US$ 8,000.00
Condition: Exact regional variant, condition and supplied configuration confirmed by quotation
JW750A is the Japan-region FIPS/TAA ordering variant of the Aruba 7210 mobility controller. Its published interfaces are four 10GBase-X SFP+ ports and two dual-personality Gigabit copper/SFP ports. It is not an MSM controller or an access point.Request current pricing
Condition: Condition and supplied configuration confirmed by quotation
JX925A denotes the standard IL Aruba 7008 controller: eight Gigabit copper ports, 100 W PoE+, and a 16-AP/1K-client designation. It is not an access point.US$ 200.00