Brand procurement
Browse ARUBA products for Aruba CX switching, campus access points, mobility gateways, Instant On products, optics and network management licenses. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.

Priority model guides
Recently updated

R4H38A is HPE Aruba Networking's AP-577 USF1 TAA outdoor Wi-Fi 6 order with internal directional antennas. The mount determines where the chassis points: HPE recommends H1 for wall mounting with tilt, while V1A and V2 point this model down. E0 supports 2.5Gbps and E1 supports 1Gbps. Specify the approved destination, mounting orientation and PoE configuration when requesting a quote.

JW473AAE is the HPE Aruba Networking LIC-PEF controller Policy Enforcement Firewall per-AP E-LTU software license. It enables context-based access policies on the controller; no AP or controller hardware is supplied. Quote the AP quantity, controller release and existing entitlements.

JW474AAE is the HPE Aruba Networking LIC-RFP controller RFProtect per-AP software license, supplied as E-LTU. RFProtect adds spectrum analysis and wireless intrusion protection; this order does not supply an access point or controller. Quote the AP count and existing license inventory.

R4W30A identifies the HPE Aruba Networking AP-575EX EG order with internal omnidirectional antennas and dual-radio Wi-Fi 6. E0 supports 2.5Gbps and E1 supports 1Gbps; both can receive PoE. Confirm the power configuration and separately selected mounting bracket with the quote. Listed power injectors must remain outside classified areas, and the exact installation requires approval.

R4H07A is the HPE Aruba Networking AP-518 RWF1 TAA order: a hardened Wi-Fi 6 access point with four external antenna connections for 5 GHz and two for 2.4 GHz. Its E0 SmartRate uplink reaches 2.5Gbps; E1 reaches 1Gbps. PoE supplies power, and the power source is sold separately. Request a quote with the deployment country and antenna plan.

JW635A is the Aruba 7005 RW FIPS/TAA-designated mobility controller. HPE lists this exact ordering code with four Gigabit ports and a 16-AP/1K-client designation; the separate 7005 installation guide provides the 1,024-user hardware reference. Confirm deployment mode and licenses before sizing.

JW634A identifies the US-region Aruba 7005 controller with four Gigabit copper ports. Its official ordering description uses a 16-AP/1K-client designation; use the separate installation guide and licensed deployment limits for capacity planning.

JW638A is the Aruba 7005 IL-region controller carrying the FIPS/TAA designation. HPE lists four Gigabit copper ports and a 16-AP/1K-client ordering description; confirm software, licenses and the intended deployment before sizing.
ARUBA buyers should validate controller-based versus Instant operation, country code, radio and antenna variant, PoE source, mounting kit and subscription. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: New Factory Sealed
<p>R4H38A is HPE Aruba Networking's AP-577 USF1 TAA outdoor Wi-Fi 6 order with internal directional antennas. The mount determines where the chassis points: HPE recommends H1 for wall mounting with tilt, while V1A and V2 point this model down. E0 supports 2.5Gbps and E1 supports 1Gbps. Specify the approved destination, mounting orientation and PoE configuration when requesting a quote.</p>US$ 200.00
Condition: Electronic license
<p>JW473AAE is the HPE Aruba Networking LIC-PEF controller Policy Enforcement Firewall per-AP E-LTU software license. It enables context-based access policies on the controller; no AP or controller hardware is supplied. Quote the AP quantity, controller release and existing entitlements.</p>US$ 47.00
Condition: Electronic license
<p>JW474AAE is the HPE Aruba Networking LIC-RFP controller RFProtect per-AP software license, supplied as E-LTU. RFProtect adds spectrum analysis and wireless intrusion protection; this order does not supply an access point or controller. Quote the AP count and existing license inventory.</p>US$ 368.00
Condition: New Factory Sealed
<p>R4W30A identifies the HPE Aruba Networking AP-575EX EG order with internal omnidirectional antennas and dual-radio Wi-Fi 6. E0 supports 2.5Gbps and E1 supports 1Gbps; both can receive PoE. Confirm the power configuration and separately selected mounting bracket with the quote. Listed power injectors must remain outside classified areas, and the exact installation requires approval.</p>US$ 200.00
Condition: New Factory Sealed
<p>R4H07A is the HPE Aruba Networking AP-518 RWF1 TAA order: a hardened Wi-Fi 6 access point with four external antenna connections for 5 GHz and two for 2.4 GHz. Its E0 SmartRate uplink reaches 2.5Gbps; E1 reaches 1Gbps. PoE supplies power, and the power source is sold separately. Request a quote with the deployment country and antenna plan.</p>US$ 200.00
Condition: New
JW635A is the Aruba 7005 RW FIPS/TAA-designated mobility controller. HPE lists this exact ordering code with four Gigabit ports and a 16-AP/1K-client designation; the separate 7005 installation guide provides the 1,024-user hardware reference. Confirm deployment mode and licenses before sizing.US$ 200.00
Condition: New
JW634A identifies the US-region Aruba 7005 controller with four Gigabit copper ports. Its official ordering description uses a 16-AP/1K-client designation; use the separate installation guide and licensed deployment limits for capacity planning.US$ 200.00
Condition: New
JW638A is the Aruba 7005 IL-region controller carrying the FIPS/TAA designation. HPE lists four Gigabit copper ports and a 16-AP/1K-client ordering description; confirm software, licenses and the intended deployment before sizing.US$ 400.00
Condition: New
R7J46A identifies the HPE Aruba Networking AP-615-EG campus access point with internal antennas and a dual-radio, tri-band 2x2 Wi-Fi 6E design. Confirm the EG variant and permitted radio configuration for the deployment location.US$ 140.00
Condition: Condition confirmed by quotation
R8N89A is the fanless CX 6000 12G Class4 PoE model with a shared 139 W budget, two additional Gigabit ports and two 1G SFP connections. HPE specifies 32 Gbps switching capacity, 23.8 Mpps throughput and 4 GB DDR3 for this A-revision model.US$ 298.00
Condition: Condition confirmed by quotation
HPE Aruba R8N88A is the CX 6000 24G 4SFP switch: 24 Gigabit copper connections and four 1G optical uplinks. Its exact-model table lists 56 Gbps switching capacity, 41.6 Mpps throughput and 4 GB DDR3 memory.US$ 329.00
Condition: Condition confirmed by quotation
R8N85A combines 48 Gigabit copper access ports with four Gigabit SFP uplinks and a shared 370 W Class 4 PoE budget. HPE lists 4 GB DDR3 memory and 16 GB eMMC for this exact revision-A CX 6000 model.US$ 955.00
Condition: Condition confirmed by quotation
JL679A is the compact, fanless CX 6100 switch with 12 Gigabit access ports, two additional Gigabit ports and two 1/10G SFP uplinks. Its 139 W Class 4 PoE budget is shared across powered devices, separate from the switch’s own electrical consumption.US$ 479.00
Condition: Condition confirmed by quotation
JL677A is the HPE Aruba CX 6100 access switch with 24 Gigabit copper ports, four 1/10G SFP uplinks and a 370 W Class 4 PoE budget. This budget is shared by connected powered devices; it is not the supply available to each port.US$ 932.00
Condition: New Factory Sealed
R3K00ACM identifies the Aruba CM AP-AC2-12B external desktop AC/DC adapter. It is a power accessory, not Wi-Fi hardware. Verify the exact unit rating and connection before replacement.US$ 15.00
Condition: New Factory Sealed
JX990ACM is the Aruba CM AP-AC-12V30B desktop AC/DC power adapter. HPE lists this accessory at 12 V/30 W in its Aruba 510 Series reference; it is not an access point.US$ 15.00
Condition: New Factory Sealed
R3K00A identifies the HPE Aruba AP-AC2-12B external AC/DC desktop power adapter. It is a power accessory, not a wireless access point; confirm the offered unit label and device requirements before purchase.US$ 15.00
Condition: Condition confirmed by quotation
R2H25A is the AP-505 (EG) indoor campus access point in the Aruba 500 Series, with internal antennas and two 2x2 Wi-Fi 6 radios.US$ 220.00
Condition: Condition confirmed by quotation
JZ031A identifies the Aruba AP-345 (RW) unified campus access point with internal antennas. Its two 4x4 radios support conventional dual-band or optional dual-5-GHz operation, with a 2.5 GbE SmartRate and a separate 1 GbE uplink.US$ 800.00
Condition: Condition confirmed by quotation
HPE lists JZ038A as the IL FIPS/TAA variant of AP-345. It is an internal-antenna campus access point with dual 4x4 MU-MIMO radios, not an AP22 or an external-connector AP-344.US$ 210.00