Condition: New Factory Sealed

AIR-WLC2106-K9 is Cisco's legacy 2100 Series wireless controller for up to 6 Cisco Aironet access points.

Condition: New Factory Sealed

AIR-WLC2112-K9 is Cisco's legacy 2100 Series wireless controller for up to 12 Cisco Aironet access points.

Condition: New Factory Sealed

AIR-CT2504-50-K9 is Cisco's 2504 wireless controller order for up to 50 Cisco access points. The AP count is a license capacity, not a client or radio-performance figure.

Condition: New Factory Sealed

AIR-CT2504-25-K9 is Cisco's 2504 wireless controller order for up to 25 Cisco access points. The AP count is a license capacity, not a client or radio-performance figure.

Condition: New Factory Sealed

AIR-CT2504-15-K9 is Cisco's 2504 wireless controller order for up to 15 Cisco access points. The AP count is a license capacity, not a client or radio-performance figure.

Condition: New Factory Sealed

AIR-AP1815T-A-K9 is the A-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the A-domain AP, keep exact PID, destination-country approval and controller country in one record. Validate split-tunnel or centrally switched policy, guest isolation, local-port access and emergency remote recovery with the approved production image.

Condition: New Factory Sealed

AIR-AP1815T-B-K9 is the B-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the B-domain order, preserve carton labeling and dated approval before serial assignment. Commission the AP behind the actual modem or router, record NAT behavior and MTU, and test controller reconnection after both broadband and power interruptions.

Condition: New Factory Sealed

AIR-AP1815T-N-K9 is the N-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the N-domain unit, define a remote-site privacy and support record: destination approval, controller logs retained, user-visible troubleshooting steps and an escalation path that does not require exposing home-network credentials. Test WAN replacement with a second ISP handoff.

Condition: New Factory Sealed

AIR-AP1815T-S-K9 is the S-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the S-domain AP, verify the full PID on quote, carton and controller inventory before activation. Measure voice-call quality and corporate application response through the OfficeExtend tunnel while all occupied local Ethernet ports carry representative traffic.

Condition: New Factory Sealed

AIR-AP1815T-Q-K9 is the Q-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the Q-domain order, build an asset-return workflow linking serial, remote user, desk location, power adapter, WAN cable and controller object. Test factory reset and secure reassignment before the AP is issued to another destination.

Condition: New Factory Sealed

AIR-AP1815T-T-K9 is the T-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the T-domain AP, stage a brownout test that interrupts the remote WAN while local wired devices remain attached. Capture tunnel recovery time, WLAN reauthentication, local-port state and help-desk instructions for a nontechnical user.

Condition: New Factory Sealed

AIR-AP1815T-Z-K9 is the Z-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the Z-domain record, attach destination approval before shipment and record customs destination, controller country, enabled channels and final serial assignment. A warehouse radio test cannot replace final-site regulatory evidence.

Condition: New Factory Sealed

AIR-AP1815T-E-K9 is the E-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the E-domain order, document an approved micro-branch cutover with corporate and guest WLAN reachability, three local-port VLAN assignments, WAN failback and controller image state. Revalidate country and channel state after any controller-country migration.

Condition: New Factory Sealed

AIR-AP1815T-H-K9 is the H-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the H-domain unit, create a home-office handover with ISP modem mode, WAN addressing, DNS reachability, controller round-trip time and power recovery. Repeat the test after moving the AP from staging to the employee circuit and archive both results.

Condition: New Factory Sealed

AIR-AP1815I-H-K9C is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token H and a K9C order with default Mobility Express software.

Condition: New Factory Sealed

AIR-AP1815I-F-K9 is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token F and a controller-based K9 order.

Condition: New Factory Sealed

AIR-AP1815I-R-K9C is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token R and a K9C order with default Mobility Express software.

Condition: New Factory Sealed

AIR-AP1815I-E-K9C is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token E and a K9C order with default Mobility Express software.

Condition: New Factory Sealed

AIR-AP1815I-E-K9 is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token E and a controller-based K9 order.

Condition: New Factory Sealed

AIR-AP1815W-T-K9C is a Cisco Aironet 1815w wall-plate 802.11ac Wave 2 access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, three local Gigabit ports, regulatory-domain token T and a K9C order with default Mobility Express software.