AIRAP1832I-AK910C Cisco Aironet 1832i Indoor Mobility Express AP

AIRAP1832I-AK910C exact order identity

AIRAP1832I-AK910C is a Cisco Aironet 1832i indoor access point with integrated antennas. This exact PID combines regulatory-domain token A with a legacy K910C Mobility Express procurement line. Cisco documents 802.11ac Wave 2, 3x3 MIMO with two spatial streams and a maximum 5-GHz PHY rate of 867 Mbps.

Integrated-antenna boundary

The 1832i antenna system is internal. No external antenna is selected by this access-point PID, so mounting location, orientation, ceiling construction and the post-install survey determine how the published platform is used.

Software and order boundary

Cisco's Aironet 1830 lifecycle bulletin lists each AIRAP1832I-xK910C PID as Cisco Aironet Mobility Express 1830 Series. The bulletin does not state the physical carton quantity for these K910C lines. Verify quantity, serial count and software role from the authorized quotation and received carton rather than expanding the suffix into an unsupported claim.

A regulatory-domain evidence

Cisco treats the letter as a regulatory-domain identifier and requires approval for the country of use; it is not a country name. Retain the destination-country result, the exact A-domain PID and the controller country setting in one approval record.

Use receiving as the A-domain control point: photograph the carton PID, reconcile it with the purchase order and attach the Cisco lookup before the serial is released. At commissioning, compare the controller country setting with that same record. A return replacement must repeat both checks because matching enclosure and antenna form do not establish matching regulatory identity.

Power and interface boundary

The AP supports 802.3af, 802.3at, Enhanced PoE, a local power supply and Cisco power injectors. Cisco lists a 15.4 W draw and states that USB is disabled when 802.3af is used. Record the negotiated power and the single Gigabit Ethernet uplink state.

Lifecycle decision

Cisco ended sale of the Aironet 1830 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family; available inventory does not extend these dates.

Deployment evidence worksheet

Ethernet and cabling proof

Preserve the permanent-link test, patch-lead identities, switch port, negotiated Ethernet rate and error counters. Investigate pair faults, excessive length or rate fallback before wireless acceptance begins. A link light only proves connectivity at some rate; it does not demonstrate the intended uplink performance. Tie the cable result to the AP serial so a later throughput problem can be separated from radio, controller and wired-path causes. Record the single 10/100/1000 Ethernet uplink rate, cable test and switch-port counters before evaluating wireless performance.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. The 1832i supports common Cisco Aironet mounting brackets; preserve the exact bracket and ceiling or wall interface used at the site.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. For a K910C line, reconcile every received serial against the authorized carton quantity because Cisco's lifecycle description does not state that quantity.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A K9, K9C, K910C or regulatory-token change is a different 1832i procurement line and requires a new review.

Change-window controls

Document staging evidence, production window, installer, rollback owner and measurable success criteria. Preserve the prior controller or AP state needed for recovery. After the change, close temporary credentials, compare authentication, monitoring and RF results with the approved baseline, and record the final decision. The work is not complete merely because the unit powers on or appears in a controller list. Rollback must restore the former controller or Mobility Express role, country setting, switch port and accepted RF state.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving should verify the integrated-antenna 1832i identity and distinguish K9, K9C and K910C software or procurement forms.

Operational log retention

Store the initial controller events, switch-port state, radio assignment, channel list and client test results with a consistent asset identifier. Define how long commissioning evidence is retained and who can retrieve it. A later firmware, controller or RF change should add a new dated observation rather than overwrite the original. The resulting history supports lifecycle decisions and distinguishes a new regression from the accepted baseline. Keep the first accepted join, power, wired, radio and client test results so later software or RF changes have a baseline.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should contain exact PID, serials, quantity evidence, compliance lookup, software role, mounting record and lifecycle owner.

Related Aironet 1832 order records

• AIR-AP1832I-A-K9C - compare software and procurement form.
• AIR-AP1832I-A-K9 - compare software and procurement form.
• AIR-AP1832I-Z-K9C - compare regulatory-domain evidence.

Official evidence: Cisco Aironet 1830 Series data sheet; Cisco Aironet 1830 lifecycle bulletin; Cisco Aironet 1830 support page; and Cisco wireless compliance tool.