AIR-AP1832I-B-K9C Cisco Aironet 1832i WiFi 5 Mobility Express AP

AIR-AP1832I-B-K9C exact order identity

AIR-AP1832I-B-K9C is a Cisco Aironet 1832i indoor access point with integrated antennas. This exact PID combines regulatory-domain token B with a single configurable K9C Mobility Express order. Cisco documents 802.11ac Wave 2, 3x3 MIMO with two spatial streams and a maximum 5-GHz PHY rate of 867 Mbps.

Integrated-antenna boundary

The 1832i antenna system is internal. No external antenna is selected by this access-point PID, so mounting location, orientation, ceiling construction and the post-install survey determine how the published platform is used.

Software and order boundary

Cisco identifies AIR-AP1832I-x-K9C as configurable and supplied with the default Mobility Express software option. Preserve the intended Mobility Express or external-controller role, actual software release and conversion state instead of inferring the live role from the carton alone.

B regulatory-domain evidence

Cisco treats the letter as a regulatory-domain identifier and requires approval for the country of use; it is not a country name. Match the B-domain carton label to the purchase line before serial assignment, then archive the dated compliance lookup.

Build the B-domain record around quotation-to-asset traceability. Preserve the authorized line, received label, chassis serial, assigned site and reviewer as one chain. If the controller later moves to another country configuration, open a new approval event rather than overwriting the original evidence; the history should explain both the purchased identity and every deployment decision.

Power and interface boundary

The AP supports 802.3af, 802.3at, Enhanced PoE, a local power supply and Cisco power injectors. Cisco lists a 15.4 W draw and states that USB is disabled when 802.3af is used. Record the negotiated power and the single Gigabit Ethernet uplink state.

Lifecycle decision

Cisco ended sale of the Aironet 1830 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family; available inventory does not extend these dates.

Deployment evidence worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. The 1832i draws up to 15.4 W and supports 802.3af or 802.3at; Cisco states that 802.3af disables the USB port.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. The 1832i supports common Cisco Aironet mounting brackets; preserve the exact bracket and ceiling or wall interface used at the site.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco makes the customer responsible for country approval; keep the dated compliance lookup with the 1832i serial and controller country.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A K9, K9C, K910C or regulatory-token change is a different 1832i procurement line and requires a new review.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet generation must leave service and which surrounding dependencies need migration. Cisco ended 1830 Series software maintenance on 1 May 2023, so the retained controller compatibility result is a lifecycle control.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. Roaming acceptance should identify neighboring cells, client type and controller events rather than treating static association as proof.

Operational log retention

Store the initial controller events, switch-port state, radio assignment, channel list and client test results with a consistent asset identifier. Define how long commissioning evidence is retained and who can retrieve it. A later firmware, controller or RF change should add a new dated observation rather than overwrite the original. The resulting history supports lifecycle decisions and distinguishes a new regression from the accepted baseline. Keep the first accepted join, power, wired, radio and client test results so later software or RF changes have a baseline.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should contain exact PID, serials, quantity evidence, compliance lookup, software role, mounting record and lifecycle owner.

Related Aironet 1832 order records

• AIRAP1832I-ZK910C - compare regulatory-domain evidence.
• AIRAP1832I-TK910C - compare regulatory-domain evidence.
• AIRAP1832I-SK910C - compare regulatory-domain evidence.

Official evidence: Cisco Aironet 1830 Series data sheet; Cisco Aironet 1830 lifecycle bulletin; Cisco Aironet 1830 support page; and Cisco wireless compliance tool.