C9120AXI-G Cisco Catalyst 9120AXI Enterprise 802.11ax Indoor APs

C9120AXI-G exact order identity

C9120AXI-G is a Cisco Catalyst 9120AX Series indoor Wi-Fi 6 access point with integrated antennas. The exact PID combines the I antenna form, a controller-based access-point order and regulatory-domain token G.

Antenna and installation boundary

Cisco documents four integrated dual-band antennas, four additional single-band 5 GHz antennas used in dual-5-GHz mode, one 2.4 GHz IoT antenna and one dual-band auxiliary-radio antenna. No external antenna is selected by this PID. Mounting position, enclosure orientation and the post-install RF survey are therefore part of the acceptance evidence. The integrated-antenna order does not require an external antenna bill of materials.

Controller-image boundary

Cisco lists this PID without the EWC infix, so the order is the controller-based access-point form rather than an EWC software-image order. Record the target controller model and release. Cisco's getting-started guide requires AireOS 8.9.111.0 or later, or IOS XE 16.11.1b or later, for the 9120AX family.

G regulatory-domain evidence

Cisco uses the final PID letter as a regulatory-domain identifier and requires customers to verify approval for the country of use. The letter is not a country name. Reconcile the G-domain PID at receiving and prevent a nearby domain SKU from being accepted as a cosmetic substitution.

Use substitution handling as the G-domain control. Receiving must compare every character of the ordered and delivered PID, quarantine a different token and preserve the disposition decision. After acceptance, link the correct label to the controller object and site. This keeps a nearby Catalyst 9120 SKU from entering service solely because its family and antenna enclosure look identical.

Power and wired-uplink boundary

The family has one 100/1000/2500 Multigigabit Ethernet uplink. Cisco lists full 4x4 radio operation, 2.5-Gigabit Ethernet and USB with 802.3at; under 802.3af both radios reduce to 1x1, Ethernet reduces to 1 GbE and USB is disabled.

External controller decision

This PID does not carry the EWC software-image infix. Record the production controller and supported software release, and verify the live compatibility matrix before an upgrade or substitution.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For the 9120AX, keep the controller model, release and first successful CAPWAP join with the exact regulatory-domain PID.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. The full 4x4 radios and 2.5-Gigabit link require 802.3at; Cisco states that 802.3af reduces both radios to 1x1, limits Ethernet to 1 GbE and disables USB.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. Asset identity must preserve AXI, AXE or AXP, the EWC state and the final domain token because each field changes the procurement boundary.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A different antenna form, EWC state or regulatory token is a different 9120AX order and requires a new technical acceptance decision.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. A stored 9120AX spare should be periodically tested for controller join, negotiated PoE state and the antenna or mounting dependencies it protects.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. Roaming evidence should identify the neighboring cells, client type and flexible-radio mode instead of relying on a static association test.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. For EWC orders, record the 17.15.x support ceiling and a CAPWAP conversion decision; for non-EWC orders, record the external controller lifecycle.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving must distinguish the integrated AXI enclosure from the external-antenna AXE and professional-installation AXP order before power is applied.

Related Catalyst 9120 order records

• C9120AXP-EWC-G - compare antenna form and domain evidence.
• C9120AXE-EWC-G - compare antenna form and domain evidence.
• C9120AXP-G - compare antenna form and domain evidence.

Official evidence: Cisco Catalyst 9120AX data sheet; Cisco Catalyst 9120AX getting-started guide; Cisco wireless compliance tool.