Juniper Switches - Page 2

Condition: New Factory Sealed

EX2300-24P is a Juniper fixed Ethernet access switch with 24 PoE/PoE+ Gigabit copper ports and four 1/10GbE SFP/SFP+ uplinks.

Condition: New Factory Sealed

EX-SFP-GE80KCW1490 is a Juniper Gigabit Ethernet CWDM SFP using a 1490nm channel and duplex LC single-mode fiber for links up to 80km.

Condition: New Factory Sealed

EX-SFP-GE10KT14R13 is a Juniper 1000BASE-BX SFP transmitting at 1490nm and receiving at 1310nm over one single-mode fiber for up to 10km.

Condition: New Factory Sealed

EX-SFP-GE10KT13R14 is a Juniper 1000BASE-BX SFP transmitting at 1310nm and receiving at 1490nm over one single-mode fiber for up to 10km.

Condition: New Factory Sealed

EX-SFP-FE20KT13R15 is a Juniper 100BASE-BX Fast Ethernet SFP using Tx 1310nm and Rx 1550nm over one single-mode fiber for links up to 20km.

Condition: New Factory Sealed

EX-SFP-1FE-FX is a Juniper 100BASE-FX SFP with an LC connector, 1310nm wavelength and 2km reach on multimode fiber.

Condition: New Factory Sealed

EX-SFP-10GE-USR is a Juniper 10GbE SFP+ optical transceiver using 850nm multimode fiber, with published reach of 10m on OM1, 20m on OM2 and 100m on OM3.

Condition: New Factory Sealed

Juniper EX-SFP-10GE-SR (part 740-021308) is an 850nm 10GBASE-SR SFP+ optical transceiver with duplex LC and DOM; Juniper lists up to 300m on OM3 and up to 400m on OM4 multimode fiber.

Condition: New Factory Sealed

Juniper EX-SFP-10GE-LRM (part 740-021310) is a 10GBASE-LRM SFP+ optical transceiver with a 1310nm duplex LC interface, DOM, up to 300m reach on supported single-mode fiber and up to 220m on supported multimode fiber.

Condition: New Factory Sealed

EX3400-24T is the 24-port non-PoE EX3400 model with four SFP/SFP+ and two QSFP+ uplinks for compact data-only access deployments.

Condition: New Factory Sealed

EX3400-24P combines 24 Gigabit Ethernet PoE/PoE+ ports with four SFP/SFP+ and two QSFP+ uplinks for smaller powered access locations.

Condition: New Factory Sealed

EX3400-48T provides 48 non-PoE Gigabit Ethernet access ports, four SFP/SFP+ uplinks and two QSFP+ ports for dense data-only access networks.

Condition: New Factory Sealed

EX3400-48P provides 48 Gigabit Ethernet PoE/PoE+ access ports, four SFP/SFP+ uplinks and two QSFP+ ports for high-density powered edge deployments.

Condition: New Factory Sealed

QFX5100-96S-DC-AFI is the DC-powered, air-in version of the Juniper QFX5100-96S. Its official order row specifies 96 SFP+ and eight QSFP+ positions, two management ports, and FRU-to-port airflow.

Condition: New Factory Sealed

QFX5100-96S-AFO is the AC, air-out order of the Juniper QFX5100-96S. Juniper lists 96 SFP+ and eight QSFP+ transceiver positions, two management ports, and airflow from the ports toward the field-replaceable units.

Condition: New Factory Sealed

QFX5110-48S-AFO is Juniper's 1U AC QFX5110 switch with 48 SFP+ ports, four QSFP28 ports and front-to-back airflow (ports to FRUs). Juniper lists 1.76 Tbps bidirectional throughput and 1.32 Bpps forwarding capacity for this 48S variant.

Condition: New Factory Sealed

EX-SFP-GE10KT15R13 is a Juniper 1000BASE-BX single-fiber SFP module operating at 1 Gbps over single-strand SMF, with TX 1550 nm / RX 1310 nm optics and a documented 10 km reach class.

Condition: New Factory Sealed

EX-SFP-GE10KT13R15 is a Juniper 1000BASE-BX single-fiber SFP module operating at 1 Gbps over single-strand SMF, with TX 1310 nm / RX 1550 nm optics and a documented 10 km reach class.

Condition: New Factory Sealed

EX-SFP-FE20KT15R13 is a Juniper 100BASE-BX single-fiber SFP module operating at 100 Mbps over single-strand SMF, with TX 1550 nm / RX 1310 nm optics and a documented 20 km reach class.

Condition: New Factory Sealed

EX-SFP-1GE-T is a Juniper 1000BASE-T copper SFP module operating at 1 Gbps over balanced copper, with electrical optics and a documented 100 m channel class reach class.