Enterprise IT Network Hardware Products - Page 44

Condition: Condition and supplied accessories confirmed by quotation

RF-DC6-865/915 is Contacta’s six-position drop-in charger and programming station for RF-RX1 receivers and RF-TX1 transmitters. Choose the regional 865 MHz or 915 MHz version to match the devices; the slash does not identify a universal dual-band unit.

Condition: Condition and included assemblies confirmed by quotation

CHAS-MP-PTX3000-S is the PTX3000 spare chassis identified in Juniper’s hardware-component table. It houses the router assemblies; this chassis order alone does not specify an operational router configuration or forwarding capacity.

Condition: Condition and included components confirmed by quotation

EX3400-24T-TAA is Juniper’s TAA-designated 24-port copper Ethernet switch with four 1/10GbE SFP/SFP+ uplinks and two 40GbE QSFP+ ports. The ordering row specifies front-to-back airflow and one JPSU-150-AC-AFO power supply; optics are separate.

Condition: Condition and supplied components confirmed by quotation

ACX500-DC is the DC-powered ACX500 router, using passive cooling and weighing up to 3.9 kg. Juniper lists 65 W device power plus an 80 W PoE allowance for this configuration.

Condition: Condition and supplied fasteners confirmed by quotation

EX2300-C-CBL-GRD is the optional cable guard for Juniper EX2300-C switches. Its front slots route connected cables to help prevent accidental unplugging; this order is a physical accessory, not a switch or a software subscription.

Condition: Condition and supplied components confirmed by quotation

SRX4100-SYS-JE-DC is the two-DC-supply SRX4100 system with Junos Software Enhanced, eight 10GbE interfaces and four fan trays. It is a security gateway, not a campus switch.

Condition: Condition and supplied components confirmed by quotation

SRX4100-SYS-JE-AC combines SRX4100 security-gateway hardware with Junos Software Enhanced. The original package specifies eight 10GbE interfaces, two AC supplies, four fan trays, cables and a rack kit.

Condition: Condition and included components confirmed by quotation

QFX5100-96S-DC-AFO is the DC-powered, front-to-back airflow version of the 2U QFX5100-96S aggregation switch. It has 96 SFP/SFP+ ports and eight QSFP+ ports, not security-appliance interfaces.

Condition: Condition confirmed by quotation

EX2300-24MP is an Ethernet access switch with eight 2.5GbE-capable copper ports, sixteen Gigabit copper ports and four SFP/SFP+ uplinks. Its shared PoE budget is 380 W; it is not a security appliance.

Condition: Condition and installed components confirmed by quotation

EX4300-32F combines 32 SFP access ports with four built-in 10-Gigabit SFP+ and two built-in 40-Gigabit QSFP+ ports. This AC-powered fiber model has no PoE; extra uplink ports require an optional module.

Condition: Accessory condition and completeness confirmed by quotation

SRX240-RMK is Juniper’s rack-mount kit for one SRX240 gateway in a 19-inch rack. It is a mounting accessory, not a network switch or security appliance.

Condition: Condition and availability confirmed by quotation

S1720-10GW-2P-E is a Huawei managed access switch, not a Cisco product. It combines eight copper Gigabit downlinks with two Gigabit optical uplinks and supports web, SNMP and command-line management.

Condition: Condition and availability confirmed by quotation

EX2300-C-12T is Juniper’s fanless compact non-PoE switch. It connects 12 copper Gigabit endpoints and has two 10-Gigabit uplinks; attached devices needing power must use another power source.

Condition: Condition and availability confirmed by quotation

Juniper EX2300-C-12P is a compact fanless Ethernet switch with 12 Gigabit copper access ports, PoE/PoE+ and two 10-Gigabit uplinks. The system PoE budget is 124 W, not 30 W simultaneously on every port.

Condition: Spare-panel condition and availability confirmed by quotation

QFX10000-PWR-BLNK is Juniper’s spare power-supply blank cover panel for the QFX10000 modular-switch line. It is a mechanical cover, not a powered supply, security appliance or Ethernet switch. Juniper lists this exact part in its QFX10000 lifecycle notice.

Condition: Unit and storage condition confirmed before quotation acceptance

FG-61E combines the FortiGate 60E/61E wired interface layout with 128 GB SSD storage, explicitly identified in Fortinet’s Secure SD-WAN reference architecture. The chassis provides seven internal RJ45 ports, two WAN connections and one DMZ connection, plus a separate management console.

Condition: Condition, power adapter and accessories confirmed by quotation

FG-60E is a FortiGate desktop firewall with ten Gigabit RJ45 network connections: two WAN, one DMZ and seven numbered internal ports. Its separate RJ45 console is for CLI management. The standard model uses a 12 VDC input, unlike the separately documented PoE variant.

Condition: Condition and included power adapter confirmed by quotation

FG-30E is the FortiGate 30E firewall with one Gigabit RJ45 WAN connection and four numbered Gigabit network ports. A separate RJ45 console provides CLI access; it is not a sixth Ethernet interface. The hardware uses a 12 VDC power input and has a USB Type-A port.

Condition: Condition and supplied configuration confirmed by quotation

Fortinet FG-2601F is the AC-powered 2601F firewall with two 960 GB NVMe SSDs. Its data connections include sixteen 10/1 GE copper ports, sixteen 25/10/1 GE optical slots and four 100/40 GE optical slots, with separate HA and management interfaces.

Condition: Condition and DC power configuration confirmed by quotation

QFX5700-BASE-DC is the DC-powered base switch configuration, not a security appliance. Its DC power modules have selectable 60 A and 80 A input settings; available output depends on the selected setting and supply voltage. Validate the facility power design and separately ordered line cards before purchase.