Enterprise IT Network Hardware Products - Page 43

Condition: New Factory Sealed

The C9200-24T-A is a 24-port Gigabit data switch with Network Advantage and modular uplinks. It has no PoE+ access-port power capability and uses the modular Catalyst 9200 hardware platform.

Condition: New Factory Sealed

C9200-48T-E is a 48-port Gigabit data-only Catalyst 9200 chassis with Network Essentials and modular uplinks. It is not a PoE endpoint power source; choose the uplink module to suit the installation.

Condition: New Factory Sealed

Cisco C9200-24P-A is a 24-port Gigabit PoE+ Catalyst 9200 with Network Advantage and a modular uplink design. The chassis order does not by itself establish which network module or transceivers will be delivered.

Condition: New Factory Sealed

C9200L-24P-4X-E provides 24 Gigabit PoE+ access ports, four fixed 1/10G uplinks and Network Essentials. This fixed-uplink Catalyst 9200L uses StackWise-80, not the StackWise-160 system of modular C9200 switches.

Condition: New Factory Sealed

C9200L-48P-4G-E is the 48-port Gigabit PoE+ Catalyst 9200L with four fixed 1G uplinks and Network Essentials. Its standalone performance is 104 Gbps switching capacity and 77.38 Mpps forwarding, not twice that packet rate.

Condition: New Factory Sealed

The C9200L-48P-4X-E combines 48 Gigabit PoE+ access ports with four fixed 1/10G SFP+ uplinks and Network Essentials. Cisco specifies 176 Gbps switching capacity and 130.95 Mpps forwarding for this hardware configuration without stacking.

Condition: New Factory Sealed

C9200L-48PL-4G-E identifies a Catalyst 9200L with 48 Gigabit access ports, partial PoE+ and four fixed 1G SFP uplinks. The E order carries Network Essentials. It is not the C9300L-48P-4X-A model previously named on this page.

Condition: Condition, accessories and support confirmed per order

CSE-200+ is a Barco ClickShare content-sharing system with HDMI input for wired sources and HDMI output for the room display. Two participants can present at once. Its presentation role is different from a wireless network controller.

Condition: Condition and supplied set confirmed by quotation

Barco CSE-800 is a ClickShare presentation system for shared meeting-room displays. It has two HDMI inputs and two HDMI outputs, with up to four shared sources per screen or eight across two screens. It is not a campus WLAN controller.

Condition: New Factory Sealed

ClickShare CSE-200 is a legacy meeting-room presentation base unit, not a campus wireless access point. Its specification separates 16 simultaneous connections from two sources displayed at once. Barco marks the model End of Life and identifies C-10 as its replacement.

Condition: New Factory Sealed

The 86-inch ClickShare X-Display Plus is an integrated meeting display with a CX-M presentation module, camera and room audio. Barco identifies regional article R9861686ZH; availability is limited to mainland China, Hong Kong and Macau. It is not wireless networking infrastructure.

Condition: New Factory Sealed

ClickShare C-10 is Barco wireless presentation equipment for meeting rooms. It supports two sources on screen and interactive presentation features; it is not campus WLAN infrastructure. Confirm the generation and one- or two-Button package before ordering.

Condition: New Factory Sealed

ClickShare X-Display Plus 65 combines a 65-inch 4K LCD, camera, microphone array and room speakers with a ClickShare CX-M module. It is an integrated meeting display, not an enterprise network switch. Barco limits availability to mainland China, Hong Kong and Macau.

Condition: Regional availability and condition require confirmation

Barco identifies ClickShare Wireless Speakerphone as article R9861660DM. It combines eight beamforming MEMS microphones with a 4 W speaker for meeting audio, rather than providing WLAN coverage. Manufacturer availability is limited to mainland China, Hong Kong and Macau.

Condition: Legacy unit; verify condition and regional article

WiCS-2100 is a wePresent wireless presentation receiver, not a campus network controller. It displays up to four shared sources through a 1080p HDMI output. Barco marks the product end of life and states that XMS Cloud no longer supports it.

Condition: Verify regional article, generation and condition before order

This C-5 listing specifies Barco’s Gen 2 ZH presentation unit, identified in the manufacturer’s ordering list as R9861605ZH. It shares one source on the meeting-room display and is not a campus access point or WLAN controller.

Condition: Finish, condition and kit contents confirmed by quotation

STS-K002L is Contacta’s surface-mounted window intercom for quieter counters and booths. Separate customer-side speaker and microphone units work with an open-duplex amplifier, staff microphone/loudspeaker and counter hearing loop. It is not a network switch.

Condition: Condition and kit contents confirmed by quotation

STS-K009-IP-L-B is Contacta’s entry intercom kit with an IP55 surface-mounted customer call unit, open-duplex speech amplifier, staff unit and hearing loop. The front call button alerts staff while the communication channel remains hands-free.

Condition: Condition and supplied listening accessories confirmed by quotation

IR-RX2 is Contacta’s portable infrared receiver for assistive listening, supporting the manufacturer’s 2.3 MHz and 2.8 MHz transmitters. It uses rechargeable batteries and requires headphones or an assistive neck loop; it is not an Ethernet switch.

Condition: Condition and package contents confirmed by quotation

IR-RX2-DC5 is a five-position charging base for Contacta portable listening receivers, including IR-RX2. It is a charger accessory, not a network switch. Expansion to twenty receivers requires four bases and the approved higher-current power supply.