Cisco C9200L-48PL-4G-E Catalyst 9200L Partial PoE+ Switch

Read each part of the order

The 4G suffix identifies four fixed 1 Gigabit uplinks, not the 1/10G uplinks of a 4X model. Cisco lists this exact E order under Network Essentials; the A variant is a different software-tier selection. Confirm the quoted identifier against the chassis and entitlement records.

Budget power for the actual endpoints

Cisco describes the PL configuration as partial PoE+. Its power table lists 370 W of available PoE with one PWR-C5-600WAC supply and 740 W with two such supplies. Supply count and endpoint load must therefore be part of the design; forty-eight access ports do not promise forty-eight fully powered high-draw endpoints in the default configuration.

Keep the hardware family boundaries clear

The installation guide identifies two power-supply slots, two fixed fans and StackWise-80 support. Do not apply modular uplink, fanless compact-chassis or StackWise-160 specifications from other Catalyst 9200 variants to this switch. Confirm the required stacking kit and cables separately.

Document the delivered configuration

Specify power supplies, uplink optics, stacking accessories and the applicable software entitlement on the quotation. Transceiver presence and a separate subscription term cannot be inferred from the base product code. Check condition and support for the supplied serial number before acceptance.

Cisco exact ordering, power and interface tables · Catalyst 9200L hardware identification