Wireless - Page 73

Condition: New Factory Sealed

R2W96A is the Rest-of-World Aruba Instant On AP11 indoor access point with dual-band 2x2 Wi-Fi 5 radios, one Gigabit Ethernet uplink and 802.3af PoE or 12V DC input. A power source is selected separately.

Condition: New Factory Sealed

902-0120-0000 is a RUCKUS multipurpose metal mounting bracket for supported indoor R-Series access points. It supports wall, ceiling, pole and truss installations and is not a network switch or an access point.

Condition: New Factory Sealed

R3T20A is the HPE Aruba Networking AP-MNT-MP10-X campus access point mount adapter kit supplied as a 10-pack. It adapts selected Aruba AP installations to existing W2/W3 mounts; it is mounting hardware, not a wireless access point.

Condition: New Factory Sealed

JZ033A is the US regulatory version of the HPE Aruba AP-345 unified campus access point, with internal antennas, dual 4x4:4 MU-MIMO radios and a SmartRate multigigabit Ethernet interface.

Condition: New Factory Sealed

AirEngine 5760-10 is a Huawei indoor Wi-Fi 6 access point with 2x2 MIMO, simultaneous 2.4 GHz and 5 GHz service, built-in Smart Antennas and a maximum published device rate of 1.774 Gbit/s.

Condition: New Factory Sealed

AP7050DE is a Huawei AP7000-series indoor wireless access point. Huawei's official software documentation explicitly lists AP7050DE for Fit/Fat mode switching and built-in Bluetooth broadcast functions; software release, controller and regional deployment requirements must be checked before reuse.

Condition: New Factory Sealed

AIR-AP1832I-B-K9 is the B regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco describes this exact PID as an 802.11ac Wave 2, 3x3:2 spatial-stream model with internal antennas and identifies B as the US regulatory domain in its lifecycle notice.

Condition: New Factory Sealed

AIR-AP1832I-E-K9C is the E regulatory-domain Cisco Aironet 1832i configurable PID shipped with a Mobility Express software image by default. It uses internal antennas and dual-band 3x3 MIMO with two spatial streams; country approval and the desired controller role must be checked before purchase.

Condition: New Factory Sealed

AIR-AP1832I-D-K9 is the D regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco's published D-domain table lists eleven 2.4 GHz channels and two separate 5 GHz ranges; country approval and controller compatibility must be confirmed before deployment.

Condition: New Factory Sealed

AIR-AP1832I-C-K9 is a controller-based Cisco Aironet 1832i indoor access point with internal antennas, 802.11ac Wave 2 operation, 3x3 MIMO and two spatial streams. The C identifies its regulatory domain; this K9 PID is not the K9C Mobility Express default-software model.

Condition: New Factory Sealed

AIR-AP1832I-K-K9 is the K regulatory-domain Cisco Aironet 1832i controller-based indoor AP. Cisco documents thirteen 2.4 GHz channels and three distinct 5 GHz channel groups for K-domain hardware; deployment approval and the exact controller release must be verified.

Condition: New Factory Sealed

AIR-AP1832I-S-K9 is the S regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. Cisco documents 13 channels at 2.4 GHz and three 5 GHz channel groups for S-domain hardware; country approval and controller software must be verified.

Condition: New Factory Sealed

AIR-AP1832I-R-K9 is the R regulatory-domain Cisco Aironet 1832i controller-based indoor access point. It has internal antennas, dual-band 3x3 MIMO with two spatial streams and 802.11ac Wave 2 operation; country approval and controller compatibility must be verified before deployment.

Condition: New Factory Sealed

AIR-AP1832I-Q-K9 is the Q regulatory-domain, controller-based Cisco Aironet 1832i indoor access point. It uses internal antennas and dual-band 3x3 MIMO with two spatial streams; the Q-domain channel plan and country approval must be verified before deployment.

Condition: New Factory Sealed

AIR-AP1832I-E-K9 is the E regulatory-domain, controller-based Cisco Aironet 1832i indoor access point with internal antennas, 802.11ac Wave 2 and 3x3 MIMO with two spatial streams.

Condition: New Factory Sealed

C9115AXI-S is the S regulatory-domain, controller-based Cisco Catalyst 9115AX indoor Wi-Fi 6 access point with four internal dual-band antennas, 4x4 MIMO and one 2.5G multigigabit Ethernet port.

Condition: New Factory Sealed

FAP-423E is a Fortinet indoor 802.11ac access point with two 4x4 radios, eight external RP-SMA antenna connections and two Gigabit Ethernet ports. The 2.4 GHz radio supports up to 600 Mbps and the 5 GHz radio supports up to 1.733 Gbps.

Condition: New Factory Sealed

FC-10-PE221-247-02-12 FORTINET enterprise IT hardware. Contact YYST Global for stock, lead time and quote support.

Condition: New Factory Sealed

FC-10-P23JF-284-02-60 FORTINET wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.

Condition: New Factory Sealed

AT815SN-POE HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.