AIR-AP3802I-QK910 - Cisco Aironet 3800i Access Point

AIR-AP3802I-QK910 Order Identity

AIR-AP3802I-QK910 is a Cisco Aironet 3800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 3802I internal-antenna access point, carries regulatory-domain token Q, and uses a fixed-domain 10-unit eco-pack.

Antenna and quantity boundary

Integrated antennas; no external antenna is included or selected as part of this SKU. Confirm the mounting position, ceiling construction and intended coverage because antenna orientation is determined by the integrated-antenna enclosure.

Cisco identifies the K910 order form as an eco-pack containing 10 access points; carton-level receiving must reconcile all ten serial numbers.

This is a non-C fixed-domain order form. Receiving must match the exact domain-bearing SKU and must not substitute a configurable or different-domain line without approval.

Regulatory-domain control

The order carries regulatory-domain token Q. Treat that token as an identifier, not a country name. Complete site-specific compliance evidence and asset registration against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token Q.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

Power budget

Confirm the switch port's negotiated PoE mode, available power, cable length and LLDP behavior. Keep the measured power result with commissioning evidence. Measure the power state after both radios and production features are active, not only while the unit is idle. Record switch model, port, power class, negotiated result and any feature reduction shown by the controller. If an injector is proposed, verify its Cisco support and place it in the maintained bill of materials.

Mounting inventory

List the ceiling or wall bracket, enclosure, safety restraint and access requirements. Receiving should reject a mechanically incomplete deployment kit. Receiving should identify the bracket and any above-ceiling, wall, enclosure or seismic requirement before scheduling installers. Photograph the mounting label and cable entry after installation, and record access constraints for replacement. Missing mechanical parts should be resolved as a bill-of-material exception, not hidden in the AP description.

Serial registration

Capture each serial number against the site, controller and asset owner. For multi-unit orders, reconcile every chassis rather than recording only the carton SKU. For each received unit, preserve the carton reference, chassis serial, MAC address, deployment site and controller assignment. A ten-unit pack needs ten reconciled asset rows and exception handling for shortages or substitutions. This control prevents a pack-level SKU from obscuring which physical AP is covered by support or replacement work.

Replacement planning

Cisco lists the 3800 Series in its end-of-life notices. Record the permitted service horizon, replacement trigger and successor design with this purchase. Document the event that ends further 3802 deployment, the approved successor family and any controller coexistence constraint. Include funding, survey impact and installation sequencing. If the item is purchased as a spare, set a final-use date so old inventory does not silently outlive the network's supported architecture.

Migration dependency

Inventory controller, licensing, switch power, cabling and mounting dependencies that must change when the 3802 is replaced by a newer platform. Map the existing AP to its controller, licenses, authentication services, switch port, power budget, cable, bracket and monitoring objects. The successor plan should state which dependencies can be reused and which require change. This prevents a nominal AP replacement from failing because the surrounding platform was never inventoried.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Cisco Aironet 3800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 3802I internal-antenna access point records

• AIR-AP3802I-HK910
• AIR-AP3802I-KK910
• AIR-AP3802I-NK910

Official evidence: Cisco Aironet 3800 Series data sheet, Cisco Aironet 3800 Series getting started guide, and Cisco end-of-life notices.