AIR-AP3802P-IK910 - Cisco Aironet 3800p Access Point

AIR-AP3802P-IK910 Order Identity

AIR-AP3802P-IK910 is a Cisco Aironet 3800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 3802P external-antenna access point, carries regulatory-domain token I, and uses a fixed-domain 10-unit eco-pack.

Antenna and quantity boundary

External antenna system required; verify the exact Cisco-supported antenna and connector arrangement. Treat the antenna design as an engineered item: retain the selected antenna, cable path, mounting method and regulatory approval with the access-point order.

Cisco identifies the K910 order form as an eco-pack containing 10 access points; carton-level receiving must reconcile all ten serial numbers.

This is a non-C fixed-domain order form. Receiving must match the exact domain-bearing SKU and must not substitute a configurable or different-domain line without approval.

Regulatory-domain control

The order carries regulatory-domain token I. Treat that token as an identifier, not a country name. Complete site address validation and Cisco compliance lookup against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token I.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

Multigigabit uplink

The 3800 Series supports multigigabit Ethernet. Verify the switch port, cabling category, negotiated rate and error counters instead of assuming a 2.5 or 5 Gbps link. Commissioning should preserve the negotiated Ethernet rate, cable-test result, packet errors and switch configuration. Where the access switch is limited to 1 Gbps, state that design choice explicitly instead of presenting multigigabit capability as achieved throughput. Recheck negotiation after patch-cord or switch changes.

RF survey

Associate this order with the survey location, channel plan and expected client density. Re-survey after installation if mounting or antenna conditions differ from design. The survey record should show mounting height, obstructions, neighboring radios, channel width and the client mix used for capacity planning. Compare measured post-install coverage with the design and document any power, channel or placement adjustment. This gives the exact order a site-specific purpose beyond a generic product description.

Serial registration

Capture each serial number against the site, controller and asset owner. For multi-unit orders, reconcile every chassis rather than recording only the carton SKU. For each received unit, preserve the carton reference, chassis serial, MAC address, deployment site and controller assignment. A ten-unit pack needs ten reconciled asset rows and exception handling for shortages or substitutions. This control prevents a pack-level SKU from obscuring which physical AP is covered by support or replacement work.

Site acceptance

Commission association, authentication, roaming, uplink negotiation and monitoring at the intended location. Preserve results that can be compared after later changes. The handover record should contain client authentication, DHCP and DNS checks, roaming evidence, controller alarms, switch-port counters and a monitoring owner. Test from representative client types in the intended coverage area. Acceptance is incomplete when the AP merely joins the controller but user and operational paths remain unverified.

Monitoring ownership

Assign owners for controller alarms, switch-port health, radio utilization and software advisories so the installed AP remains observable after handover. Monitoring handover should name the team that owns AP reachability, controller join failures, radio utilization, client health and switch-port errors. Define alert thresholds and an escalation path, then verify that the exact serial appears in the operational inventory. Unowned telemetry does not provide a reliable service baseline.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Cisco Aironet 3800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 3802P external-antenna access point records

• AIR-AP3802P-CK910
• AIR-AP3802P-EK910
• AIR-AP3802P-FK910

Official evidence: Cisco Aironet 3800 Series data sheet, Cisco Aironet 3800 Series getting started guide, and Cisco end-of-life notices.