AIR-AP3802P-HK910 - Cisco Aironet 3800p Access Point

AIR-AP3802P-HK910 Order Identity

AIR-AP3802P-HK910 is a Cisco Aironet 3800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 3802P external-antenna access point, carries regulatory-domain token H, and uses a fixed-domain 10-unit eco-pack.

Antenna and quantity boundary

External antenna system required; verify the exact Cisco-supported antenna and connector arrangement. Treat the antenna design as an engineered item: retain the selected antenna, cable path, mounting method and regulatory approval with the access-point order.

Cisco identifies the K910 order form as an eco-pack containing 10 access points; carton-level receiving must reconcile all ten serial numbers.

This is a non-C fixed-domain order form. Receiving must match the exact domain-bearing SKU and must not substitute a configurable or different-domain line without approval.

Regulatory-domain control

The order carries regulatory-domain token H. Treat that token as an identifier, not a country name. Complete sales-destination evidence and local radio authorization against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token H.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

Multigigabit uplink

The 3800 Series supports multigigabit Ethernet. Verify the switch port, cabling category, negotiated rate and error counters instead of assuming a 2.5 or 5 Gbps link. Commissioning should preserve the negotiated Ethernet rate, cable-test result, packet errors and switch configuration. Where the access switch is limited to 1 Gbps, state that design choice explicitly instead of presenting multigigabit capability as achieved throughput. Recheck negotiation after patch-cord or switch changes.

RF survey

Associate this order with the survey location, channel plan and expected client density. Re-survey after installation if mounting or antenna conditions differ from design. The survey record should show mounting height, obstructions, neighboring radios, channel width and the client mix used for capacity planning. Compare measured post-install coverage with the design and document any power, channel or placement adjustment. This gives the exact order a site-specific purpose beyond a generic product description.

Software lifecycle

Check the target controller release against Cisco support documentation and the approved migration architecture before buying additional 3800 Series capacity. The lifecycle note should name the approved controller release, last tested release, security-maintenance owner and migration review date. Review Cisco notices before each expansion because available inventory does not extend software compatibility. A replacement design should cover controller, licensing, power, cabling and mounting rather than only the radio unit.

Spare policy

State whether the unit is production capacity, a cold spare or a replacement. Define firmware, storage, periodic test and ownership requirements for unused stock. A spare should have a named site scope, compatible controller image, storage condition and periodic power-on test. Record whether its regulatory domain, antenna form and mounting kit match the protected population. Before use, repeat compliance and software checks because suitability can change while the unit is held in stock.

Antenna governance

Keep antenna identity and approved installation conditions with the AP record. A matching connector alone is not evidence of regulatory or RF suitability. For external-antenna models, preserve manufacturer part numbers, connector arrangement, gain, pattern, cable type, loss and mounting orientation. For internal-antenna models, preserve enclosure orientation and placement constraints. In both cases, compare the installed design with country approval and the RF survey before service acceptance.

H-domain spare separation

Separate H-domain production units from spares when the ten-pack is received. Production records include site antenna geometry and live acceptance; spare records include storage condition, compatible antenna inventory, controller image and a dated test before field use.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Cisco Aironet 3800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 3802P external-antenna access point records

• AIR-AP3802P-AK910
• AIR-AP3802P-CK910
• AIR-AP3802P-EK910

Official evidence: Cisco Aironet 3800 Series data sheet, Cisco Aironet 3800 Series getting started guide, and Cisco end-of-life notices.