CISCO AIR-AP4800-B1-K9C Aironet 4800 Series Access Points

AIR-AP4800-B1-K9C Order Identity

AIR-AP4800-B1-K9C is a Cisco Aironet 4800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 4800 internal-antenna access point, carries regulatory-domain token B1, and uses a configurable single-unit order.

Antenna and quantity boundary

Integrated multiradio antenna system; no external Wi-Fi antenna is selected as part of this SKU. Confirm mounting orientation, ceiling structure, Hyperlocation requirements and RF survey assumptions because the antenna system is integral to the platform.

This K9 order form represents one access point; antennas, mounting choices, power source and controller dependencies remain separate unless the authorized bill of materials states otherwise.

The C suffix marks a configurable order form. The final Cisco quotation must preserve the selected regulatory domain and any configuration choices; the suffix does not make the unit globally deployable.

Regulatory-domain control

The order carries regulatory-domain token B1. Treat that token as an identifier, not a country name. Complete country-compliance confirmation and receiving inspection against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token B1.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

RF survey

Associate this order with the survey location, channel plan and expected client density. Re-survey after installation if mounting or antenna conditions differ from design. The survey record should show mounting height, obstructions, neighboring radios, channel width and the client mix used for capacity planning. Compare measured post-install coverage with the design and document any power, channel or placement adjustment. This gives the exact order a site-specific purpose beyond a generic product description.

Mounting inventory

List the ceiling or wall bracket, enclosure, safety restraint and access requirements. Receiving should reject a mechanically incomplete deployment kit. Receiving should identify the bracket and any above-ceiling, wall, enclosure or seismic requirement before scheduling installers. Photograph the mounting label and cable entry after installation, and record access constraints for replacement. Missing mechanical parts should be resolved as a bill-of-material exception, not hidden in the AP description.

Replacement planning

Cisco lists the 3800 Series in its end-of-life notices. Record the permitted service horizon, replacement trigger and successor design with this purchase. Document the event that ends further 3802 deployment, the approved successor family and any controller coexistence constraint. Include funding, survey impact and installation sequencing. If the item is purchased as a spare, set a final-use date so old inventory does not silently outlive the network's supported architecture.

Antenna governance

Keep antenna identity and approved installation conditions with the AP record. A matching connector alone is not evidence of regulatory or RF suitability. For external-antenna models, preserve manufacturer part numbers, connector arrangement, gain, pattern, cable type, loss and mounting orientation. For internal-antenna models, preserve enclosure orientation and placement constraints. In both cases, compare the installed design with country approval and the RF survey before service acceptance.

Order reconciliation

Match the exact regulatory-domain token, antenna form, configurable suffix and unit quantity on the Cisco quotation before accepting a substitute. The purchase review should compare every meaningful token in the quoted model with the requested line and this page. Record whether the order is single or ten-unit, internal or external antenna, configurable or fixed-domain. Any substitution requires a new regulatory, antenna, quantity and lifecycle review before acceptance.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Cisco Aironet 4800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 4800 internal-antenna access point records

• AIR-AP4800-K-K9C
• AIR-AP4800-I-K9C
• AIR-AP4800-F-K9C

Official evidence: Cisco Aironet 4800 Series data sheet, Cisco Aironet 4800 Series getting started guide, and Cisco end-of-life notices.