R230D Huawei R200 Series Indoor 802.11ac Wave 1 2x2 MIMO Access Point
- 763 412 7282
- +86 010 69614620
R230D Overview
A remote radio unit for distributed room coverage
Huawei identifies R230D as a remote radio unit in its distributed Wi-Fi architecture. That design separates the central AP, which handles unified services and configuration, from room-side radio units that provide user access and forward data. When replacing an R230D, verify the installed central AP, controller and software compatibility together; this listing does not establish standalone operation or compatibility with every Huawei controller.
One Fast Ethernet port sets the wired boundary
The exact 50082748 hardware record specifies a single RJ45 Fast Ethernet port with 10/100M auto-negotiation. It is not a Gigabit uplink and does not provide the multiple downstream Ethernet or telephone pass-through ports found on some other wall-plate models. Dual-band built-in antennas support 2x2 MIMO, with 802.11b/g/n on 2.4 GHz and 802.11a/n/ac on 5 GHz. The wired interface limit should be considered separately from wireless radio capability when reviewing expected throughput.
Check the wall mounting space and PoE supply
Huawei lists 802.3af PoE input and 5.1 W device power consumption. Verify that the serving port can supply the required power before replacing an existing unit. The enclosure measures 86 x 120 x 26 mm excluding the rear protrusion, so allow additional clearance for the rear connection and mounting arrangement. Its 0.1 kg weight and IP20 protection are hardware attributes, not evidence of outdoor suitability.
Match environmental limits to the installation
The specified operating range is 0–40 degrees Celsius. Above 1800 m, the upper temperature limit decreases by 1 degree for each additional 300 m, within the stated altitude range up to 5000 m. Include the exact R230D model, quantity and existing network configuration in the quotation request; confirm included mounting parts and any required software entitlement separately rather than assuming a complete distributed system is included.
Huawei exact-model hardware specifications | Huawei exact-model hardware specifications
R230D Specification
Verified model specifications
| Item | Fact and boundary |
|---|---|
| Exact model / ordering code | R230D / 50082748 |
| Architecture role | Remote radio unit in distributed Wi-Fi |
| Radio configuration | Built-in antennas; dual-band 2x2 MIMO |
| Radio standards | 2.4 GHz: 802.11b/g/n; 5 GHz: 802.11a/n/ac |
| Ethernet connector | One RJ45 FE; 10/100M auto-negotiation |
| Power input / consumption | 802.3af PoE / 5.1 W |
| Enclosure size | 86 x 120 x 26 mm; excludes rear protrusion |
| Weight / protection | 0.1 kg / IP20 |
Huawei exact-model hardware specifications | Huawei exact-model hardware specifications
R230D Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
R230D FAQ
What is R230D?
R230D Huawei R200 Series Indoor 802.11ac Wave 1 2x2 MIMO Access Point is a HUAWEI R200 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What radio configuration is listed for R230D?
For R230D, the manufacturer specification lists radio configuration as Built-in antennas; dual-band 2x2 MIMO.
What radio standards is listed for R230D?
For R230D, the manufacturer specification lists radio standards as 2.4 GHz: 802.11b/g/n; 5 GHz: 802.11a/n/ac.
What interfaces and ports does R230D provide?
For R230D, the manufacturer specification lists ethernet connector as One RJ45 FE; 10/100M auto-negotiation.
Is R230D available from YYST Global?
Contact YYST Global to confirm availability for R230D, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related R230D
Huawei R240D Wall-Plate Remote Unit
Huawei R240D is an indoor wall-plate remote unit for a central-AP-managed agile distributed Wi-Fi system. Its room-facing ETH0–ETH3 interfaces run at 10/100M, while the GE/PoE uplink supports 10/100/1000M and PoE input. Huawei separately identifies phone connections for a POTS phone or modem and for a traditional PSTN. R240D accepts 12 V ±10% DC or IEEE 802.3af/at PoE, with an 8.7 W consumption reference. The manufacturer restricts this 86-type-box design to countries and regions supporting that box format and documents dual-band IEEE 802.11a/b/g/n/ac operation.
Huawei R250D-E Wall-Plate Remote Unit
Huawei R250D-E is a wall-plate remote unit connected to a central AP in Huawei agile distributed Wi-Fi. Its exact hardware chapter separates GE0/PoE_IN from GE1/PoE_OUT, provides GE2–GE4 Gigabit data connections, and lists a 48 V ±5% DC input alongside IEEE 802.3af/at PoE. A USB2.0 storage connection and an RJ45 cable pass-through support the room wiring arrangement. The documented 11.5 W consumption excludes USB and downstream PoE output power. R250D-E uses an 86 mm plate and dual-band IEEE 802.11ac Wave 2; it is not interchangeable with the simpler R250D port layout.
Huawei R251D Wall-Plate Remote Unit
Huawei R251D is an indoor wall-plate remote unit for Huawei agile distributed Wi-Fi, connected to and managed by a central AP. The base R251D requires IEEE 802.3af PoE input through GE0/PoE_IN and provides four GE1–GE4 Ethernet data ports plus RJ45 pass-through ports for transparent network or phone cabling. Huawei lists 11.5 W unit consumption, a 32.5 × 86 × 150 mm housing and 0.25 kg weight. The shared characteristics specify IEEE 802.11ac Wave 2 on 2.4 GHz and 5 GHz, smart antennas and installation in 86 mm, 120 mm or 118 mm junction boxes.
Huawei R251D-E Wall-Plate Remote Unit
Huawei R251D-E is an indoor wall-plate remote unit for agile distributed Wi-Fi, connected to and managed by a central AP. The E model requires IEEE 802.3at PoE input through GE0/PoE_IN, adds GE4/PoE_Out and a USB2.0 storage interface, and also provides GE1–GE3 Ethernet ports and separate RJ45 pass-through ports. Huawei lists 11.5 W unit consumption excluding the USB and PoE_OUT output power. The shared characteristics describe dual-band IEEE 802.11ac Wave 2, smart antennas and installation in 86 mm, 120 mm or 118 mm junction boxes; verify the exact mounting and central-AP arrangement.
Huawei R250D R200 Series Agile Distributed Remote Unit
R250D is an exact Huawei R200-series remote unit used in a compatible central-AP design; it is not a standalone AP5000 access point.