Brand procurement
CISCO Products and Procurement - Page 13
Browse CISCO products for Catalyst and Nexus switching, ISR and Catalyst routing, Secure Firewall, enterprise wireless, optics, modules and software subscriptions. Compare exact models, reference prices, availability requirements, official technical references and procurement requirements from YYST Global.
Recently updated
Recently Updated CISCO Products
N9K-C9504-B3-S Cisco Nexus 9504 Chassis Bundle
N9K-C9504-B3-S is a Nexus 9504 chassis bundle with 1 supervisor, 3 power supplies, 2 controllers, 4 FM-S modules and 3 fans. Confirm line cards and optics; request a quote.
CAB-7513ACI Cisco Italy 16A 250VAC Power Cord Accessory
CAB-7513ACI is a Cisco Italy AC power cord, 14 ft (4.27 m), rated 16A at 250VAC. Match the documented plug and equipment connector; request a quote.
Cisco C1-N5K-C5596UP-FA Nexus 5596UP Cisco ONE Switch
C1-N5K-C5596UP-FA is Cisco’s Cisco ONE Nexus 5596UP switch order: a 2RU chassis described with two power supplies, four fans and 48 fixed 10GE ports. It is a complete switch ordering identity, not a separate fan accessory. Confirm the actual supplied system and software entitlement. The official Series photo shows three optional expansion modules; it is not a photograph or packing list for the offered C1 unit.
Cisco ASR5K-ACCY-LUG= ASR 5000 Chassis Lug Accessory Kit
ASR5K-ACCY-LUG= is Cisco’s chassis lug accessory kit for the ASR 5000 platform, not a standalone network switch. Cisco identifies this exact order in amended EOL10509: manufacturer sales ended in January 2016 and hardware support ended in January 2021. Confirm the supplied kit contents and installed chassis before ordering. The official image is a Series chassis grounding reference, not a photograph or bill of materials for the offered kit.
Cisco N3K-C3048-FAN Nexus 3048 Port-Side Exhaust Fan Module
N3K-C3048-FAN is the Cisco Nexus 3048 fan module for forward airflow, meaning port-side exhaust. This replacement cooling component is not a standalone network switch. The FAN-B intake variant has the opposite airflow and must not be substituted without checking the installed fan and power-supply arrangement. The image is an official host assembly reference, not a supplied fan-unit photograph.
Cisco N3K-C3048-FAN-B Nexus 3048 Port-Side Intake Fan Module
N3K-C3048-FAN-B is Cisco’s Nexus 3048 fan module with reversed airflow, also described as port-side intake. It is a cooling component, not a standalone network switch. Match its airflow to the installed cooling and power-supply arrangement. Cisco lists this exact PID in EOL14841. The official image is a host assembly reference, not a supplied fan-unit photograph.
Cisco ASR-9001-TRAY Cable Management Tray
ASR-9001-TRAY is Cisco’s cable-management tray for the ASR 9001 router, not a network switch or a chassis rack-mount kit. The installation guide places the tray at the front-bottom of the chassis to organize interface cables. Cisco names this exact ordering row in EOL14473. The official drawing shows an assembly installation reference, not the supplied unit.
Cisco A99-32X100GE-CM 32-Port 100GE Consumption Model Line Card
A99-32X100GE-CM is a fourth-generation Cisco ASR 9900 chassis line card with thirty-two 100GE QSFP28 interfaces. It is a hardware component, not a complete router, a pure software license or the A99-32HG-FC replacement. Cisco lists the CM part in EOL15321; manufacturer end of sale was 15 June 2024, with support subject to contract eligibility. The image is Cisco’s TR-family illustration, not a CM supplied-unit photograph.
CISCO Procurement Guide
CISCO buyers should validate software and license tier, PoE budget and uplink module, airflow, power supply and stacking compatibility. Use the active catalog below to compare exact part numbers and open each product page for specification, condition, price and official-source details.
- Confirm software and license tier before ordering.
- Confirm PoE budget and uplink module before ordering.
- Confirm airflow, power supply and stacking compatibility before ordering.
How to compare CISCO models
Start with the exact manufacturer part number rather than the marketing family name. Then compare the technical configuration, included licenses and accessories, product condition, warranty responsibility, lead time and destination-specific requirements. For replacements, validate interoperability with the installed software, optics, power and management platform.
YYST Global product pages provide model-level specifications and official manufacturer references where available. Procurement teams can use these pages to prepare a bill of materials and then request confirmation of quantity, serial-number availability, shipping and acceptance terms.
Condition: Legacy equipment; condition confirmed by quotation
WS-C4510R+E is a Cisco Catalyst 4500E chassis with eight line-card positions and supervisor slots 5 and 6. The base order includes the fan but no power supply.US$ 6,238.00
Condition: New Factory Sealed
AIR-AP1815T-H-K9 is the H-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the H-domain unit, create a home-office handover with ISP modem mode, WAN addressing, DNS reachability, controller round-trip time and power recovery. Repeat the test after moving the AP from staging to the employee circuit and archive both results.US$ 200.00
Condition: New Factory Sealed
AIR-AP1815T-E-K9 is the E-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the E-domain order, document an approved micro-branch cutover with corporate and guest WLAN reachability, three local-port VLAN assignments, WAN failback and controller image state. Revalidate country and channel state after any controller-country migration.US$ 200.00
Condition: New Factory Sealed
AIR-AP1815T-Z-K9 is the Z-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the Z-domain record, attach destination approval before shipment and record customs destination, controller country, enabled channels and final serial assignment. A warehouse radio test cannot replace final-site regulatory evidence.US$ 200.00
Condition: New Factory Sealed
AIR-AP1815T-T-K9 is the T-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the T-domain AP, stage a brownout test that interrupts the remote WAN while local wired devices remain attached. Capture tunnel recovery time, WLAN reauthentication, local-port state and help-desk instructions for a nontechnical user.US$ 200.00
Condition: New Factory Sealed
AIR-AP1815T-Q-K9 is the Q-domain Cisco Aironet 1815t controller-based OfficeExtend access point for teleworker or micro-branch wired and wireless service. For the Q-domain order, build an asset-return workflow linking serial, remote user, desk location, power adapter, WAN cable and controller object. Test factory reset and secure reassignment before the AP is issued to another destination.US$ 200.00
Condition: Remanufactured order; supplied condition confirmed by quotation
AIR-AP1852I-EK9-RF is the remanufactured order mapped by Cisco to AIR-AP1852I-E-K9. Cisco identifies this exact order as an 802.11ac Wave 2 access point with internal antennas, 4x4:4SS and the E regulatory domain.Request current pricing
Condition: Condition confirmed by quotation
AIR-CAP1702I-D-K9 belongs to the Aironet 1702i family, not Catalyst 9100. Cisco lists the 1702i with built-in antennas, 802.11n/ac and controller-based operation. This is a retired platform; check the existing deployment before ordering a replacement.US$ 400.00
Condition: Condition confirmed by quotation
AIR-AP1815T-I-K9 is an Aironet 1815t teleworker access point, not an 1815i or Catalyst 9100. The 1815t connects remote wired and wireless clients to the corporate network and provides three local Gigabit ports plus one Gigabit uplink.US$ 859.00
Condition: Condition confirmed by quotation
AIR-CAP2702E-H-K9 is an Aironet 2702e controller-based order for indoor deployment with external antennas. Do not specify it as an IP67 waterproof outdoor access point. Cisco lists the Aironet 2700 family as retired.US$ 400.00
Condition: Condition confirmed by quotation
AIR-AP2802I-Z-K9C identifies a configurable Aironet 2802i order with the Z regulatory-domain token. It is an indoor, internal-antenna access point with two Gigabit Ethernet connections, not a Catalyst 9100.Request current pricing
Condition: Condition confirmed by quotation
AIR-AP2702I-UXK9 is an Aironet 2702 universal access-point model, not a Catalyst 9100. Review its regulatory priming state before replacement procurement: Cisco now lists Aironet 2700 and AirProvision as retired.US$ 400.00
Condition: Condition confirmed by quotation
AIR-AP3802I-H-K9C is an internal-antenna Aironet 3802i configurable order. Its two Ethernet connections are different: one multigigabit port and one Gigabit AUX port, not two 5-Gbps ports.Request current pricing
Condition: Condition confirmed by quotation
Cisco identifies AIR-AP2802I-D-K9I as an India-only, controller-based Aironet 2802i order. This indoor access point has internal antennas; retain the final K9I suffix when checking the supplied product.Request current pricing
Condition: Condition confirmed by quotation
AIR-AP2802I-E-K9 is the E-domain, controller-based Cisco Aironet 2802i indoor access point. It uses integrated antennas, 802.11ac Wave 2 radios and two Gigabit Ethernet interfaces; it is not a Catalyst 9100 model.US$ 21,539.00
Condition: New Factory Sealed
AIR-AP1815I-K-K9 is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token K and a controller-based K9 order.Request current pricing
Condition: New Factory Sealed
AIR-AP1815I-T-K9 is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token T and a controller-based K9 order.Request current pricing
Condition: New Factory Sealed
AIR-AP1815I-Z-K9C is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token Z and a K9C order with default Mobility Express software.Request current pricing
Condition: New Factory Sealed
AIR-AP1815I-S-K9C is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token S and a K9C order with default Mobility Express software.Request current pricing
Condition: New Factory Sealed
AIR-AP1815I-I-K9C is a Cisco Aironet 1815i indoor access point with integrated antennas, concurrent 2.4-GHz and 5-GHz 2x2 radios, two spatial streams, one Gigabit Ethernet PoE uplink, regulatory-domain token I and a K9C order with default Mobility Express software.Request current pricing
- 1
- 11
- 12
- 13
- 14
- 15
- 97